TOPPING DX3 Pro+ Bluetooth DAC/Amp
Apos AudioApos Audio
4.0

TOPPING DX3 Pro+ Bluetooth DAC/Amp

USD 173.13

Description

The evolution of a classic The TOPPING DX3 Pro+ DAC/Amp is TOPPING’s upgrade of their classic DX3 Pro. With a new Bluetooth chip and DAC chip, the Pro+ outperforms its predecessor while also coming in at a lower price point. The Pro+ has 60% lower THD+N (DAC), 85% lower THD+N (HPA), over 100% more power, and 90% lower output impedance than the DX3 Pro (LDAC version). Bluetooth 5.0 LDAC Hi-Res Audio Wireless and LDAC are supported with a Qualcomm QCC5152 chip. Unlike other DACs that decode Bluetooth codecs with the Bluetooth chip, the DX3 Pro+ uses the ESS ES9038Q2M chip for decoding for even better performance.  Plug and play Simply plug the DX3 Pro+ via USB into your PC or Mac to enjoy all the benefits of a high-end DAC without the need for drivers. Only higher-end ASIO applications on Windows 10 require a driver.  Low noise NFCA circuit An optimized NFCA circuit provides powerful, distortion-free performance: 1800mWx2 @32Ω, 0.00015% THD+N.  High/low gain settings Two gain settings (+6dB/+19dB) make it easy to adjust for the varying impedances of IEMs and full-sized headphones.  Four output modes Adapt to every listening situation with the DX3 Pro+’s four output modes: headphone amp, headphone amp + DAC, DAC, and preamplifier. Product highlights ESS ES9038Q2M DAC chip LDAC audio THD+N: 0.00015% DSD512 PCM768kHz XMOS XU208 Built-in NFC headphone amp Remote control Specs Bluetooth 5.0: Qualcomm’s QCC5125 Chip Decoding Chip: ES9038Q2M USB In PCM: 44.1kHz-768kHz / 16bit-32bit DSD (Native): DSD64-DSD512 DSD (DoP): DSD64-DSD256 COAX / OPT in PCM: 44.1kHz-192kHz / 16bit-24bit DSD (Native): Not Supported DSD (DoP): DSD64 Bluetooth In PCM: AAX, SBC, aptX, aptX LL, aptX HD, LDAC DSD (Native): Not Supported DSD (DoP): Not Supported THD+N @1kHz (A-wt): <0.00015% THD @20-200kHz (90kBW): <0.00020% SNR: 122dB DNR: 122dB Frequency response  20Hz-20kHz (±0.3dB) 20Hz-40kHz (±0.7dB) Output level: 2.1Vrms @0dBFS Noise (A-wt): <1.8uVrms Channel crosstalk @1kHz: -137dB Channel balance: 0.3dB Output impedance: 20Ω DX3 Pro+ Headphone Amplifier Specs THD+N @1kHz (A-wt) <0.00015% @Output=1500mW (32Ω) <0.00013% @Output=160mW (300Ω) THD @20-200kHz (90kBW) <0.0005% @Output=1500mW (32Ω) <0.0005% @Output=160mW (300Ω) SNR: 120dB DNR: 120dB Frequency response  20Hz-20kHz (±0.3dB) 20Hz-40kHz (±0.7dB) Output level 5.5Vpp @G=L 21.5Vpp @G=H Noise (A-wt)  <2.1uVrms @G=L <7.0uVrms @G=H Channel crosstalk @1kHz: -90dB Gain 6dB (Vrms/FS) @G=L 19dB (Vrms/FS) @G=H Output impedance: <0.1Ω Output power 1800mW x2 @32Ω THD+N <0.1% 900mW x2 @64Ω THD+N <0.1%  250mW x2 @300Ω THD+N <0.1% Adapter impedance: >8Ω  Dimensions: 6.5” x 4.7” x 1.5” (16.5 x 12 x 4 cm) What’s included DX3 Pro+ DC 15V / 1 A Power Adapter Remote Control Bluetooth Antenna USB Cable User manual Warranty card Featured reviews "Oh, boy, does this thing sound good." -Prime Audio Reviews

Get a discount on TOPPING DX3 Pro+ Bluetooth DAC/Amp

You could save on Apos Audio TOPPING DX3 Pro+ Bluetooth DAC/Amp with a Apos Audio promo code:

    Apos Audio logo

    15% off

    171 uses
    high

    worked 22 days ago

    15% Off Whitefox Eclipse Mechanical Keyboard at Apos Audio
View all Apos Audio coupons and promo codes

More Apos Audio Products

GMK Firefly R2 Keycap Set

GMK Firefly R2 Keycap Set

Note: This is a preorder. Due to the unique circumstances of this product, these products are not eligible for refunds. Learn more here. Shiny keycaps, Captain Were you made to fly the black? The GMK Firefly Keycap Set channels the spirit of Serenity and her crew. Designed by Emir, this set features a blend of custom RAL colors: warm peach, twilight blue, and charcoal. The palette evokes the warm glow of ship lights drifting through the endless starry expanse. Can’t stop the shine Crafted by GMK, the Firefly set is made using doubleshot molding technology. Crisp legends ensure every command is readable, every stroke durable—because you never know when you’ll need to reroute power in a firefight. These keycaps are made from premium ABS plastic, keeping your keyboard sharp for many misadventures to come. Ergonomics for the whole crew Designed in the Cherry Profile, the Firefly set offers a natural hand position for all your typing or gaming escapades. Whether you’re plotting a course to Boros or playing Firefly Online, you’ll stay comfy and in control. Complete Your Kit Base Kit: The essential collection for most, covering compact to full-sized keyboards, including num pads, ISO layouts, and other common keyboard types.  Numpad Kit: Tailored for those who require a dedicated numeric input, this set complements the base kit by adding functionality for financial, data entry, and mathematical tasks. Spacebars: An expansion set offering additional spacebars and space bar clusters.  Icon Kit: Enhance your keyboard with additional return, shift, and tab keys.  40s Kit: This kit includes smaller return, backspace, and other essential keys to accommodate the unique layouts of 40% keyboards. (De)accent Kit: Offers alternate keys for ISO keyboards. Product Highlights Custom RAL colorway with warm peach, deep formal blue, charcoal, twilight blue, and firefly orange Produced by GMK Doubleshot ABS plastic for durability and longevity Designed by Emir to evoke warm summer nights Cherry profile for ergonomic comfort Specs Material: Doubleshot ABS Plastic Profile: Cherry Designer: Emir Theme: Warm summer nights and fireflies Colors: Custom RAL—warm peach, twilight blue, and charcoal

USD 120.00

Moondrop Dawn Pro Dual Portable DAC/Amp

Moondrop Dawn Pro Dual Portable DAC/Amp

Greet the Dawn like the a Pro Meet the Moondrop Dawn Pro Dual Portable DAC/Amp, where top-tier engineering meets pocket-sized convenience. Designed for the discerning audiophile on the move, this device seamlessly bridges the gap between rich sound quality and practical portability.  Premium decoding: a sound decision Driven by the Dual DS43131 DAC chip, Dawn Pro promises precision in every beat. This chip ensures that from the whispering lows to the boldest highs, every sound is reproduced with clarity and authenticity. With 32bit/384kHz PCM and DSD512, it’s not just about hearing the music, it's about experiencing every instrument, every note, and every nuance. Connectivity that's a class apart With compatibility that stretches across most computers, smartphones, and laptops, you're never too far from pristine sound quality. Whether you're jamming to lossless tracks or indulging in master audio, Dawn Pro ensures that your device doesn't limit your listening. Power and precision: hand in hand Three independent power chips and a dual flagship decoding amp set the stage for an audio experience that’s both powerful and pure. This design choice guarantees ultra-low distortion (0.00014%), a noise floor that's barely there (131dB), and a dynamic range that'll keep you coming back for more (132dB). Keep it cool under pressure Using an aviation aluminum alloy housing, the Dawn Pro doesn't just look sleek; it's built to last. But what's truly innovative is the heat dissipation design, drawing inspiration from desktop HiFi devices. Those heat dissipation vents above the chips? They ensure your device keeps its cool, even when the playlist heats up. Product highlights Dual DS43131 DAC chip for pristine audio reproduction Wide compatibility spanning computers, smartphones, and laptops Dual Cirrus Logic flagship decoding chips for an unmatched sound profile Efficient heat dissipation design inspired by desktop HiFi devices Robust aluminum alloy housing for durability and style Specs Weight: 0.03lbs (13g) Size: 1.65in x 0.88in x 0.49in (42mm x 22.45mm x 12.39mm) Earphone Jack: 3.5mm single-ended, 4.4mm balanced jack Frequency Range: 5Hz - 82kHz (±1dB) Noise Floor:  4.4mm: 1.3uV (AES17 20kHz) 3.5mm: 1.5uV (AES17 20kHz) SNR:  4.4mm: 131dB (A-wt) 3.5mm: 123dB (A-wt) Line Out:  4.4mm: 4Vrms 3.5mm: 2Vrms Dynamic Range: 4.4mm: 132dB (A-wt) THD+N Ratio: 0.00014% (AES17 20kHz, non-loaded) What's included DAWN PRO Micro DAC+AMP Type-C to Type-C adapter cable x1 Type-A to Type-C adapter x1

USD 53.99

FiiO K7 Balanced Headphone DAC/Amp

FiiO K7 Balanced Headphone DAC/Amp

A new baseline for balanced sound The K7 has a six-stage audio circuit with truly balanced analog and digital sections, which helps to reduce crosstalk and reproduce music faithfully and noiselessly. Balanced amplification couldn’t sound better Using the same THX AAA 788+ amplifiers as the K9 Pro, the K7 is capable of outputting 560mW into a 300Ω load at 1% distortion, and 200mW into a 32Ω load at 1% distortion. This ensures both low and high impedance headphones are fully powered with optimal musicality. Dual AK4493SEQ D/A chips The left and right channels are each equipped with an efficient high-performance AK4493SEQ D/A chip. These 32-bit D/A chips support 768kHz PCM and DSD512, ideal for high-resolution audio source playback. RGB indicator lights The RGB indicator lights are capable of displaying single colors as well as mixed colors, with a unique light flow effect during power on/off or input switching.  Worry-free listening Overheating, overload, and DC protection systems ensure that the K7 always operates at its best, so you can always enjoy a worry-free listening experience. Multiple independent power stages The K7 features a power design consisting of multiple independent stages, with the voltage of each stage regulated by low-noise LDOs. Feeding this power design is an external 12V switching power supply. All in all, the K7’s power design supplies plentiful, clean power for an extraordinary listening experience. Smooth operator The K7 features an all-aluminum alloy construction, carefully finished with CNC and other processes. Its elegant black color is perfectly complemented by the gold accents of the THX and Hi-Res Audio badges and the splashes of color from the RGB lights. Precisely-tuned volume Thanks to its ADC curve reconstruction, the volume potentiometer features 112 smooth steps of adjustable volume free of channel imbalances and noise. Space-conscious design  The K7 features a space-conscious design that only measures 2.1 inches thick and with a footprint smaller than ⅓ of an A4 sized sheet of paper–allowing it to fit snugly on even small desks. Product highlights THX AAA &88+ x2 amplifiers Dual AK4493SEW D/A chips Truly balanced DAC/Amp Multiple intelligence protection systems RGB status indicators 2 gain levels 3 output modes Variety of inputs and outputs All-aluminum alloy body Classic knobs Lightweight, all-in-one device Specs DAC: AK4493SEQ x2 Decoder: XMOS XUF 208 Amplifier: Dual THX AAA 788+ Outputs: 6.35mm/4.4mm Inputs: USB, optical, coaxial, RCA Output power 1: >2W (32Ω, balanced/THD+N <1%) Output power 2: >7W (32Ω, single-ended/THD+N <1%) SNR: >128.1dB Noise floor: PO<4.1uV Output impedance: <1Ω Weight: 1.3lbs Dimensions: 4.7” x 6.6” x 2.1” What’s included FiiO K7  Power cable x1 Power adapter x1 USB cable x1 Quick start guide x1 Headphone adapter x1 Warranty card x1

USD 209.99

FiiO K11 Desktop DAC/Amp

FiiO K11 Desktop DAC/Amp

Multi-Input DAC/Amp with 1400mW Output Introducing the FiiO K11: a compact powerhouse of sound that packs a punch without blowing your budget. Priced at an accessible $129, this Desktop DAC/Amp offers a feature-rich audio solution that promises quality without the high-end price tag. With its balanced output and a robust chassis, the K11 is a testament to the essentials done exceptionally well. Harmony in connectivity The K11 prides itself on its plethora of connections. Whether it's USB, optical, or coaxial inputs, or its 4.4mm, 6.35mm, and RCA line-out, the K11 ensures seamless integration into your audio environment. Its clever design allows coaxial input and output to merge into one connector, streamlining your setup without sacrificing functionality. Power in your palms With a 1400mW output under its belt, the K11 isn't shy about its capabilities. Even with a 300Ω load, this amp doesn't falter, offering 250mW to drive high-fidelity earphones and headphones with ease, ensuring they reach their full sonic potential. Tailored listening Navigating through different audio profiles is effortless with the K11's trio of gain levels and volume curves. Each gain stage has been tuned to match a variety of headphones, ensuring that from the most sensitive IEMs to the most demanding cans, your listening experience remains uncompromised. A sanctuary of sound Tucked within the slim frame of the K11 is an audio circuit specifically crafted for clarity. More than 16 low-noise LDOs provide voltage stabilization, while the external power supply maintains a consistent, pure energy flow—resulting in a sound quality that's both pristine and powerful. A study in elegance The sleek aluminum alloy body of the K11 complements any desktop setup, while the anti-slip pad ensures it remains anchored during your most intense listening sessions. This balance of aesthetic and stability makes the K11 a staple on any desk. Visual and tactile delight The custom VA display on the K11 not only withstands the test of time but also offers at-a-glance information on your music's technical details. Meanwhile, the adjustable RGB lighting on the FiiO logo adds a subtle, customizable flair to your space. The central command Simplicity meets functionality with the K11's multi-function knob. This singular control point allows you to power on, navigate menus, adjust volume, and toggle between LO/PO modes with intuitive ease, ensuring a streamlined user experience. Effortless integration For those seeking uncomplicated compatibility, the K11's USB DAC mode eliminates the need for drivers on modern systems and is even game-console friendly. It's plug-and-play simplicity at its finest for both music and games. Specs Main control chip (single-chip microcomputer): GD32F303RET6 DAC: CS43198 Supported audio formats: 384kHz/32bit PCM, DSD256  USB connector: Type-C  Display type: Custom VA Dimensions: 147×133×32.3mm (including feet) Weight: About 407g Power supply: DC12V 2A external adapter SE power output 1: L+R≥520mW +520mW (32Ω, THD+N <1%) (32Ω/single-ended/high gain) SE power output 2: L+R≥60mW+60mW (300Ω, THD+N <1%) (300Ω/single-ended/high gain) BAL power output 1: L+R≥1400mW+ 1400mW (32Ω, THD+N<1%) (32Ω/balanced /high gain) BAL power output 2: L+R≥250mW+250mW (300Ω, THD+N < 1%) (300Ω/ balanced/high gain) Frequency response: 20Hz~50kHz (Attenuation <0.2dB) SNR: ≥123dB (A-weighted) Noise floor: PO < 2.8uV (A-weighted); BAL < 4.9uV (A-weighted) Output impedance: PO < 1.2Ω (32Ω load); BAL < 2.41Ω (32Ω load) THD+N: LO < 0.00035% (1kHz/10kΩ) What’s included K11 Power adapter (including AC cable) USB A to C cable 6.35mm adapter Quick start guide Warranty card Featured reviews "For the price, it hits everything I'm looking for. This sound profile is more musical, bright, and energetic than other amps in this price range." -Gadgetry Tech "Fantastic. Build quality is good. Sound quality is second to none." -Kpaceguy

USD 139.99

You May Also Like