FPV Whoop Racing Advanced Kit (BF Edition)
BETAFPVBETAFPV
3.0

FPV Whoop Racing Advanced Kit (BF Edition)

USD 199.99

Description

BETAFPV Advanced Kit 2 - the best RTF kit for the drone starter as well as FPV pros to practice indoor. The special design of the Meteor75 Lite brushless drone, brand-new LiteRadio 2 SE Transmitter and VR01 FPV Goggles, bring you an unforgettable flight experience. To thanks customers' support and love, BETAFPV specially offers BF Edition on this Black Friday holiday.  Bullet Points Brand-new all-black appearance, this kit brings a stronger sense of wholeness, perfect fit the Black Friday holiday. Due to the popularity of the Meteor series, we especially put the new meteor 75 lite into our advanced kit. It's a lightweight 1S whoop quadcopter, only weighs 28.8g, and is simple to operate. With the high-performance FC and motors, it gives pilots plenty of power and control both indoor and outdoor flying.  Special offered LiteRadio 2 SE Transmitter instead of LiteRadio 2, it is also super easy to bind and operate, perfect for the beginner or experienced FPV racer.  With a built-in 1000mah 1S battery, LiteRadio 2 SE Transmitter has an excellent endurance performance which can up to 8 hours, brings pilots a better flight experience. BETAFPV VR01 FPV Goggles has a 4.3 inches 800*480px HD high brightness LCD screen, specially tuned for FPV racing or Model aircraft. The ergonomic design features a foam sponge faceplate and a three-sided adjustable headband. These FPV Goggles fit your face and head perfectly. This simple and clear user manual has all you need to get fly quickly. The FPV whoop racing advanced kit 2 is a really great Ready To Fly kit to get everyone started indoor and outdoor FPV racing, freestyle or just easy cruising. All parts are stored in a special customized carry case, which provides better protection and is easy to carry. Meteor75 Lite Drone For getting a cool appearance and to increase durability, we specially redesigned the Meteor75 frame. It makes the meteor75 lite looks refreshing and unique. Also, meteor75 lite is the first drone that is equipped with Lite 1-2S Brushless FC which integrates 25mW VTX, supports the Frsky D8 protocol. Featured 1102-18000KV Motor and Gemfan 40mm 3-blade propeller, pilots can get great speed and power. Comes with BT2.0 connector, lots of problems of Ph2.0 connector like voltage sag has been solved perfectly, pilots can enjoy 3-4 minutes flight with BT2.0 450mAh 1S battery. Special offers the replace frame - Meteor75 Frame.  LiteRadio 2 SE Transmitter Compared with LiteRadio 2 Transmitter, LiteRadio 2 SE Transmitter is a better choice for FPV racing starters. This radio is not only fully compatible with the Frsky D8 protocol, powered by OpenTX firmware, support firmware upgrade and simulator mode but also updates with remote calibration. What's more, come with a built-in 1000mah 1S battery, LiteRadio 2 SE Transmitter has an excellent endurance performance which can up to 8 hours, bings pilots a better flight experience. (The default version is the Frsky D8.) VR01 FPV Goggles BETAFPV VR01 FPV Goggles - a First-Person-View Goggle with 4.3 inches 800*480px HD high brightness LCD which will allow you to experience a bright world without warped and blurred images. Adopt ergonomic design with a foam sponge faceplate and a three-sided adjustable headband, comfortable like cotton, and suitable for all age ranges. Noticed: Pilots can change the OSD and VTX setting from the Goggle. Spare Parts List Comes with spare parts including 2 pcs BT2.0 450mAh battery, 1pc BT2.0 battery charger&tester, super portable for charging. What's more, the Batteries, USB charger and Spare parts for easy repairs. We also provided 4 props and 1 prop removal tool, convenient to exchange the props. FAQ Special thanks for the tutorial of Buddy RC, it is a great help for fans to bind the LiteRadio 2 (Also suit for LiteRadio 2 SE Transmitter) to the Meteor75 Lite (If you have trouble on how to bind, this will help you a lot.) The video also shows how to change the video transmitter channel and power and the flight modes of the quad! Manual for the Lite 1S FC, pls kindly check Full user manual to download Package 1 * Meteor75 Lite Brushless Whoop Drone 1 * LiteRadio 2 SE Transmitter 1 * BETAFPV VR01 FPV Goggles 4 * Gemfan 40mm 3-blade Propeller(1.5mm Shaft)(Black) 1 * USB Charging Cable 2 * Dipole 5.8G Antennas 1 * BT2.0 Battery Charger & Tester 2 * BT2.0 450mAh battery 1 * Props Removal Tool 1 * User Manual 1 * Customized EVA Carry Case

Get a deal on FPV Whoop Racing Advanced Kit (BF Edition)

You could save on BETAFPV FPV Whoop Racing Advanced Kit (BF Edition) with a BETAFPV promo code:

    BETAFPV logo

    5% off

    4829 uses
    high

    worked about 2 months ago

    5% Off Storewide at BETAFPV
View all BETAFPV coupons and promo codes

More BETAFPV Products

Air65 Brushless Whoop Quadcopter

Air65 Brushless Whoop Quadcopter

Defying gravity and embarking on an unforgettable journey with Air65! Prepare for an explosive, now upgraded and more impressive than the Meteor Series. Weighing a mere lighter 17g yet boasts next-level performance. Equipped with Air Canopy, Air65 Brushless Whoop Frame, Air Brushless Flight Controller (4IN1), and the new optional LAVA 1S 260/300mAh Battery enhances the ultra-lightweight feature. Launching 2 Propulsion System versions: Racing and Freestyle. Whether you crave high-speed agility or smooth, fluent flight, Air65 fulfills every pilot's desires. It reigns as the Ultralight King and Reaction Giant! Note: BETAFPV is immensely grateful to this testing team including ''Don Johnson, Tokyo_Dom, BLACKHORSE, wKich, Travis, Ciotti FPV, Tdog, Anthony Knight, Issac, Albert, sub250g, Tyranttfpv, Wk Breeze'' for valuable ideas in the design of this Air65. Air65 Champion Limited Edition: Precision, Power and Lightness Introducing the Air65 Champion Limited Version, only 1000pcs available! Powered by customized 0702 II|30000KV strong motors with dual ball bearings, Air65 Champion delivers an impressive thrust-to-weight ratio of 6.4:1—a 33% boost alongside a 12% increase in propulsion efficiency, setting a new standard in performance. The highly integrated Air G473 5in1 flight controller streamlines setup and maintenance, so you can focus on the thrill of flying. Weighing just 17.4g thanks to its ultra-light PEEK screws, Air65 Champion is a perfect choice for competitive whoop racing. Bullet Points Experience a New Level of Lightweight Racing and Freestyle Version Flying with our 1S 65mm Indoor Whoop. Weighing in at just 17.1g, it offers an exhilarating and agile flying experience. Air Brushless Flight Controller (4IN1), the first 1S FC that uses the G473 processor which has superior computing power, and is equipped with ICM42688P gyroscope, This all-in-one solution seamlessly integrates FC, ESC, OSD, and Onboard 5.8G 25mw~400mw VTX. and even offers an optional ELRS receiver, weighing only 2.9g. Racing/Freestyle Version Propulsion Systems are specifically designed for the lightweight 65mm whoop, delivering a thrilling flight experience tailored to the needs of every pilot. Discover the Air65, accompanied by the Z-Folding LAVA Series battery, enabling the ultimate lightweight flight experience. Take to the skies with unparalleled agility and weightlessness. Express your unique style with various part options. From 65mm frames to canopies and propellers, offering pilots a diverse selection of captivating colors. Combine with BETAFPV waterslide decals to effortlessly infuse your whoop drones with a personalized. Specifications Item: Air65 Brushless Whoop Quadcopter Weight: 17.1g (Racing & reestyle Version), 17.4g (±0.15g) (Champion Version) Wheelbase: 65mm Frame: Air65 Canopy: Air Canopy FC & ESC: Air Brushless Flight Controller (4IN1 Version) (Racing & Freestyle Version), Air Brushless Flight Controller (5IN1) (Champion Version) VTX: Onboard 5.8G 25mw~400mw VTX Camera: C03 Camera Motor: 0702SE|27000KV (Racing Version), 0702SE|23000KV  (Freestyle Version), 0702 II|30000KV (Champion Version) Props:  GF 1219S 3B (Racing & Champion Version), HQ 31mm Ultralight (Freestyle Version) Battery Connector: BT2.0 U Cable Pigtail Recommend Battery: LAVA 1S 260/300mAh Flight Time (4.35V-3.3V): 4min (LAVA 260mAh) RX Version: External ELRS 2.4G Lite (Included in quad) (Racing & Freestyle Version), Onboard ELRS 2.4G RX (Champion Version) Comparison Between Air65 Champion, Air65 & Meteor65 Air65 Champion Air65 Meteor65 Weight 17.4g (±0.15g) 17.1g 22.8g Wheelbase 65mm 65mm 65mm Frame Air65 Air65 Meteor65 Micro Frame Canopy Air Canopy Air Canopy Canopy for Micro Camera 2022 FC & ESC Air Brushless Flight Controller (5IN1) Air Brushless Flight Controller (4IN1 Version) F4 1S 5A FC (Serial ELRS 2.4G)F4 1S 5A FC (SPI Frsky) VTX Onboard 5.8G 25mw~400mw VTX Onboard 5.8G 25mw~400mw VTX M03 VTX Camera C03 Camera C03 Camera C03 Camera Motor 0702 II|30000KV Racing Version: 0702SE|27000KVFreestyle Version: 0702SE|23000KV 0802SE|19500KV Props GF 1219S 3B Racing Version: GF 1219S 3BFreestyle Version: HQ 31mm Ultralight GF 31mm 3B Battery Connector BT2.0 U Cable Pigtail BT2.0 U Cable Pigtail BT2.0 Recommend Battery LAVA 1S 260/300mAh LAVA 1S 260/300mAh BT2.0 300mAh 30CLAVA 1S 300mAh Flight Time(4.35V-3.3V) 4min (LAVA 260mAh) 4min (LAVA 260mAh) 4min (BT2.0 300mAh) RX Version Onboard ELRS 2.4G RX External ELRS 2.4G Lite ELRS/Frsky/TBS   Flight Controller & ESC The first 1S FC that uses the G473 processor, Air Brushless Flight Controller(4IN1) with balanced performance and lightness, only 2.9g. Powered and Industry-leading ICM42688P gyroscope, powering superior computing power and lightning-fast response times for precise flight execution compared to the F411. With multiple UART port options, it supports various function expansions. This all-in-one solution seamlessly integrates FC, ESC, OSD, and VTX, and even offers an optional ELRS receiver. The micro-sized OSD chip is customed. Immerse yourself effortlessly in the racing and freestyle world of Finger-Tip control, where unparalleled precision and responsiveness of the Air65 await. Upgraded Air Canopy Experience high-quality, clear, and sharper images with the lightweight C03 FPV Micro Camera, weighing just 1.45g. We've redesigned the Air Canopy structure to be more flexible, impact-resistant, and durable. The improved bending effect enhances flexibility, reduces the chances of breakage, and greatly enhances explosion resistance for easier installation. Effortlessly accommodates an assortment of Micro and Nano Analog cameras. Supporting angle adjustment from 25° to 50°. With it, Air65 can chase the limit of freestyle and racing victory worry less. Propulsion System Whether Freestyle or Racing Version, Air65 can remain agile enough to effortlessly conquer racing tracks, catering to the diverse needs of pilots. Racing Version focuses on high-speed and high-agility flight, utilizing the 0702SE|27000KV Motors and GF 1219S 3B Props for incredible speed bursts and agile steering. For a smooth and elegant free flight experience, the Freestyle Version features the 0702SE|23000KV Motors and HQ 31mm Ultralight 3B Props, allowing for timely responses and precise follow-up actions. This winning combo propels the Air65 far beyond any limitations in terms of speed and maneuverability.  The Ultralight LAVA 1S 260/300mAh Battery is a compact premier for Air65. With more concentrated center gravity, it offers crisper response, greater acceleration, and enhanced maneuverability. Featuring the groundbreaking Z-Folding Process, this LiHV battery exceeds conventional capacity and discharge thresholds. And equipped with the BT2.0 U Cable Pigtail, saying goodbye to folding cables, for easy plugging and an extended lifespan. Lighter weight by reducing pigtail length. Achieve the ultimate lightweight choice for drone racing or freestyle.  Air65 Frame To enhance the flying experience, DIY enthusiasts have diligently worked on reducing the weight of the 65mm whoop drones, especially frames for an ultra-light structure. We upgraded the Meteor65 Micro Frame to the Air65 Frame, which achieves a remarkable weight lighter from 3.64g to 2.67g. It maintains exceptional strength and durability while introducing a new motor fixed slot, and optimizing a low-profile design. Having 6 color choices, it indisputably emerges as the top topgallant choice for pilots seeking an unparalleled ultra-light Sub18g 65mm 1S Whoop drone and personality.  Recommended Parts Radio Transmitter: LiteRadio 3 Pro, LiteRadio 3, LiteRadio 2 SE Goggles: VR03 FPV Goggles, VR02 FPV Goggles FC: Air Brushless Flight Controller(4IN1) Receiver: ELRS Lite Receiver, ELRS Nano Receiver Battery: LAVA 1S 260mAh 80C Battery, LAVA 1S 300mAh 75C Battery Props: HQ 31mm Ultralight 3B Props, GF 1219S 3B Props Colorful Frame: Air65 Brushless Whoop Frame Colorful Canopy: Air Canopy Screws: Meteor Series Motor Fixing Screws Pack (40PCS) Sticker: BETAFPV Waterslide Decals FAQ Download the CLI and Firmware for the Air65 (Racing Version) Download the CLI and Firmware for the Air65 (Freestyle Version) Download the CLI and Firmware for the Air65 (Champion Version) Package 1 * Air65 Brushless Whoop Quadcopter 1 * Air Canopy 4 * GF 1219S 3B Props(Racing Version) / HQ 31mm Ultralight 3B Props(Freestyle Version) 1 * Pack of Screws 1 * 4Pin Adapter Cable 1 * USB Type-C Adapter Board

USD 94.99

Pavo20 Pro Brushless Whoop Quadcopter

Pavo20 Pro Brushless Whoop Quadcopter

Pavo20 Pro is an ideal choice for 2.2'' DJI O3 Cinewhoop under 150g, exclusively sculpted for Freestyle shooting. The LAVA Series 1104 | 7200KV Brushless Motors for maximum thrust and powered by our pioneering 2.2" Freestyle GF 2218 3-Blade Props co-developed with Gemfan. The aerodynamic frame design adds an 8-11% thrust boost, while the LAVA 3S 550mAh 75C Battery extends flight time to 6'40''. With new 2 camera fixed holes for DJI O3 camera wide-angle mode shooting, and the Pavo Series Classic Rubber Damper Design, ensure enough creative space for cinewhoop to explore and capture the most imaginative aerial feats, perfecting your freestyle shooting in the sky. Bullet Point As a 2.2'' DJI O3 Cinewhoop under 150g, the pocket-size Pavo20 Pro is an ideal choice for DJI pilots to enter FPV. Harness the power of our specialized freestyle propulsion system, the GF 2218 3-Blade Props co-developed with Gemfan, coupled with the LAVA Series 1104 | 7200KV Brushless Motors, offer unparalleled max thrust for freestyle. Employing the principles of aerodynamics, the frame boosts an extra 8~11% thrust compared with without the whoop duct, coupled with LAVA 3S 550mAh 75C Battery, enabling up to 6'40'' flight time. Featured the Pavo Series' Classic Rubber Damper Design and enhanced antenna holder for stability. It now includes 2 new cam fixed holes for wide-angle mode shooting and required just 8 screws to set up the O3 Air Unit. The F4 2-3S 20A AIO FC V1 weighs only 5.92 grams and is optimized for HD digital VTX. Its improved computing power, high response speed, and stable flight make it an ideal choice for Freestyle. Specification Items:  Pavo20 Pro Brushless Whoop Quadcopter Wheelbase: 93.7mm Weight(Without Battery, Air Unit): 66.3g Support VTX: DJI O3 Air Unit, Caddx Vista Kit, RunCam Link Support Cam: DJI O3 Cam, Caddx Series, RunCam Series 19mm/20mm Camera Filter Installation: Vertical Battery Connector: XT30 Battery Slot: 20mm*Unlimited Height Recommend Battery: LAVA 3S 450mAh 75C Battery, LAVA 3S 550mAh 75C Battery, 3S 650mAh Battery FC: F4 2-3S 20A AIO FC V1 Motor: LAVA Series 1104 | 7200KV Brushless Motors Props: Gemfan 2218 3-Blade Propellers (1.5mm Shaft) Flight Time: 6'40'' (LAVA Series 3S 550mAh Battery) RX Version: ELRS, TBS Caution: 1. Please correctly connect the battery's positive and negative terminals to prevent drone damage. 2. Battery, DJI O3 Air Unit, Caddx Vista Kit, and RunCam Link HD Digital VTX are NOT included in all packages. Please buy them separately.  HD Digital VTX System Pavo20 Pro supports various types of HD VTX. DJI O3 Air Unit supports up to 1080P using dual-band transmission technology for better signal stability. The Caddx Vista supports up to 720P with low latency and superior image quality performance. The RunCam Link is compatible with popular FPV systems like formers, providing versatile solutions for pilots. The customized HD VTX mounting bracket has a split design, making it effortless to install for pilots DIY, and explore more possibilities while ensuring HD image quality.  Propulsion System It owns a propulsion system specially for Freestyle. Co-development with the Gemfan, the pioneering 2.2'' lower pitch Gemfan 2218 3-Blade Propellers (1.5mm Shaft). Featuring LAVA Series 1104 | 7200KV Brushless Motors and the LAVA 3S 550mAh 75C Battery we recommended, ensuring delivers a high PRM, max thrust, stable linear power like cheetah reflexes propulsion system. It achieves a thrust-to-weight ratio greater than 5:1, delivering a faster and more agile freestyle up to 6'40'' flight time experience. All set on the exclusively sculpted for freestyle shooting Pavo20 Pro frame, which employs the principles of aerodynamics. Pavo20 Pro Frame Kit Pavo20 Pro Frame Kit, with a wheelbase of 93.7mm, is constructed with a crash-proof PA12 thickened whoop duct. Its reinforced cross-section design enhances the strength and blast resistance, ensuring durability in demanding flight conditions. It employs the principles of aerodynamics, boosting an extra 8~11% thrust compared with without the whoop duct, and synergizes flawlessly with an enhanced powerful propulsion system to deliver unparalleled thrust. An open-ended battery strap slot that accommodates 3S batteries while keeping side-limitation slots ensures stability. Exclusively Sculpted for HD VTX 6 camera fixed holes, including 2 new cam fixed holes for the wide-angle mode shooting, minimizing the cam side panel shadows for the wide-angle view. The cam side panel protects the lens from harm while allowing for easy vertical installation of ND filters. No more worries about angle deviations post-thrilling flights. The antenna Holder is tailored to the contours of the antenna's form and installation for a more convenient installation and stable holding. Experience the Pavo Series' Classic Rubber Damper Design, bidding farewell to "jello" in your footage and delivering a consistently smooth, HD image. The anti-vibration tips of the Pavo20 Pro are consistent with the Pavo Pico. Please refer to Pavo Pico DJI O3 Vibration Problem. Moreover, the integrated injection molding HD VTX mounting bracket boasts the utilization of an insert copper nut, getting the frame together hassle-free in a snap with just only 8 screws, equipped with half-thread screws for eliminating the trouble of adjusting the tightness of the screws, which also enhances anti-vibration and ensuring stable and smooth HD images. Click to watch the installation guide video for the DJI O3 Air Unit. Flight Controller Our F4 2-3S 20A AIO FC V1 features an ESC with a peak current of 25A, ensuring stable operation of the FC even in the event of motor stalling. The addition of a 9V 2A BEC power supply ensures the stable operation of the DJI O3 HD VTX when the battery voltage is low. It also includes a DJI O3 6-pin PMU allowing for connection to HD VTX without soldering. It integrates features such as a 16MB black box, with support for GPS, external receivers, and other devices. The redesigned solder pad layout and USB connector make installation and maintenance easier and more convenient. Pavo Series COB LED Strip The Pavo Series COB LED Strip is a 5V-powered LED strip measuring 560 mm*4 mm. It provides increased visibility and facilitates easy observation of the drone's flight by the pilots during nighttime or poorly lit conditions, which also enhances operational safety, It can be securely mounted on the frame whoop duct, adding unique lighting effects and a visually captivating appearance. Choose from a single color option of ice blue, white, green, or red, or even mix multiple colors to personalize and elevate your flying experience while ensuring safety. ND Filter for DJI O3 Camera BETAFPV ND Filter for DJI O3 Camera is specifically designed for the Pavo20 Pro, Pavo25 V2, Pavo20 , Pavo35, and Pavo Pico Brushless Whoop Quadcopter. These ND filters only vertical installate on the Pavo20 Pro. These ND filters are tailored for the DJI O3 Air Unit and are capable of reducing the amount of light that enters the camera lens. With this feature, you can achieve slower shutter speeds or wider apertures when flying. These lightweight filters are crafted from high-quality optical class ensuring optimal image clarity and are too easy to install on the build.  Recommend Parts FC&ESC: F4 2-3S 20A AIO FC V1 Motor: LAVA Series 1104 | 7200KV Brushless Motors Propellers: Gemfan 2218 3-Blade Propellers (1.5mm Shaft) Frame: Pavo20 Pro Brushless Whoop Frame Battery: LAVA 3S 450mAh 75C Battery, LAVA 3S 550mAh 75C Battery Filter: BETAFPV ND filter VTX: DJI O3, Caddx Vista, RunCam Link FAQ Click to download the FC firmware and CLI dump file(F4 2-3S 20A AIO FC V1) Package 1 * Pavo20 Pro Brushless Whoop Quadcopter 1 * Pavo20 Pro HD VTX Bracket 1 * HD VTX Bracket Screw Package 1 * Pavo Series COB LED Strip Accessory Kit (Ice Blue) 4 * Gemfan 2218 3-Blade Propellers (1.5mm Shaft) 1 * PCBA | Type-C Adapter Board 1 * 4Pin Adapter Cable Note: Battery, DJI O3 Air Unit, Caddx Vista Kit, and RunCam Link HD Digital VTX are NOT included in all packages. Please buy them separately.

USD 104.99

Beta65S BNF Micro Whoop Quadcopter

Beta65S BNF Micro Whoop Quadcopter

(old version) Beta65S with 7x16mm brushed motors have upgraded F4 Brushed FC with M01 AIO Camera 5.8G VTX. The table below shows the FC and RX that come with the drone according to the version you choose. Please note the SPI Frsky RX is the FCC version. Note: There are some changes to the Beta65S BNF Micro Whoop Quadcopter. First, the new F4 1S AIO flight controller uses MPU6500 gyro instead of MPU6000 gyro. BT2.0 battery and cable take the place of PH2.0. Finally, the Frsky protocol version is modified from Frsky FCC to Frsky D8. Frsky Version DSMX Version Flysky Version Futaba Version No RX Version FC F4 Brushed FC F4 Brushed FC F3 Flysky FC F4 Brushed FC F4 No RX FC RX SPI Frsky RX Native DSMX RX SPI Flysky RX SPI FUTABA RX None Note: If you are a Spektrum DXe radio transmitter or OrangeRX RF module user and find that you can't bind successfully, please create a ticket to contact us. Bullet Point The latest Beta65S has been updated with the newest canopy which is more durable.  More punch on the throttle with faster 19000KV 7x16mm motors and 3-blade propellers. A great alternative to the popular regular whoop drone. Provide 3 receiver versions for choice, including SPI Frsky Rx, DSMX Rx, SPI FUTABA Rx, and Flysky Rx. BETAFPV M01 AIO VTX camera with 48 channels in total. Comparison Here is the size comparison between Beta65/65S, Beta75/75S, and Beta85 drones.  Specification Frame: 65s frame V4 Weight: 25g (without battery) Flight Controller: BETAFPV F4 Brushed FC / F4 Brushed NO RX FC /  F3 Flysky FC / F4 Brushed FC (DSMX RX) Motor: 7x16mm Coreless Brush Motor, 19000KV Receiver: SPI Frsky D16 protocol / SPI FUTABA RX / SPI Flysky RX /  Native DSMX RX Cam: M01 AIO Camera 5.8G VTX Canopy: Canopy for micro camera / Canopy for Micro Camera 2022 Power connector: JST-PH 2.0 connector, AKA PowerWhoop connector (old version) / BT2.0 connector, BT2.0-PH2.0 Adapter Cable, BT2.0 1S Whoop Cable Pigtail (new version) Battery: 300mAh 1S Lipo Battery/ BT2.0 300mAh 1S 30C Battery (old version) / BT2.0 300mAh 1S 75C Battery(new version) Propeller: HQ 31mm 3-Blade Propellers (0.8mm Shaft 4PCS) Flight time: 3 min 30 second Note: The battery will be upgraded from BT2.0 300mAh 1S 30C Battery to BT2.0 300mAh 1S 75C Battery from Feb 2024. Package 1 * Beta65S Micro FPV Quad 2 * BT2.0 300mAh 1S 75C Battery 1 * Carry-on bag  1 * Screwdriver 3 * Decorative Parts

USD 69.99

Cetus X FPV Kit

Cetus X FPV Kit

Whether skillful pilots or new beginners, Cetus X FPV Kit, as the advanced 2S power whoop bundle, is a completely primary choice to reach a higher stage. From its unparalleled control to its exciting flying that has you immersed your experience through every FPV flight, there is simply nothing like Cetus X FPV Kit. With the combination of Cetus X Brushless Quadcopter, LiteRadio 3 Radio Transmitter, and VR03 FPV Goggles, get ready for the next level. Recommend the newest BT2.0 550mAh 1S Battery. More flight time and higher discharge rate. Bullet Point Nothing quite beats the experience of flying Cetus X with an enhanced propulsion system, and longer radio and video transmission. With a very functional and potential remote controller and FPV goggles, pilots can unlock more accomplishments to the next level. The Betaflight FC comes with the most popular firmware in the FPV community. Beginners are able to learn and understand more about FPV, which is an essential way to get drone experience. The Cetus FC version offers an auxiliary flight function for pilots with three speed modes. It is easier and more suitable for initial pilots. Classical white design inherited from Cetus Series and ade of PA12 material, the Cetus X frame has an excellent impact resistance in drop & impact and reduces the risk of damage, giving you more peace of mind. The 360° protection of the whoop frame ensures safe flights both indoors and outdoors. Meanwhile, the FPV camera supports 0°-40° adjustable degrees, which provides different views for pilots. LiteRadio 3 reserves a nano bay that supports the external TX module for the compatibility of more quadcopters. And the VR03 FPV goggles which are newly added a Micro SD card slot to save the video with DVR recording, support most Analog VTXs in the market. The quadcopter, radio transmitter, FPV goggles, and all of the accessories are packed in an EVA portable storage bag. It is convenient to carry outside and better to protect the equipment. Specification Item: Cetus X FPV Kit Weight: 55g Wheelbase: 95mm FC*: F4 2S 15A V1.0 FC (Betaflight FC Version)/Cetus BL V3 FC (Cetus FC Version) Motors: 1103 11000KV Motor Props: Gemfan 2020 4-Blades Props Camera: C04 FPV Camera (Caddx Nano Ant Camera/Runcam Nano 4) Camera Adjustable Angle: 0°-40° Receiver Protocol: ELRS 2.4G (Betaflight FC Version)/Frsky D8 (Cetus FC Version) VTX: M04 25-400mW VTX (Betaflight FC Version)/Cetus 25-350mW VTX V2 (Cetus FC Version) Quadcopter: Cetus X Brushless Quadcopter Transmitter: LiteRadio 3 Radio Transmitter Goggles: VR03 FPV Goggles Battery*: BT2.0 450mAh 1S 75C Battery Flight time: 5 mins Note: FC (Betaflight FC Version) has been replaced from F4 1S 12A FC to F4 2S 15A V1.0 FC since Sep 2023. The battery will be upgraded from BT2.0 450mAh 1S 30C Battery to BT2.0 450mAh 1S 75C Battery from Feb 2024. Cetus FC or Betaflight FC Cetus X with the classical Cetus flight controller version is released. It supports the position hold function, which provides easier control to pilots. If select the Betaflight FC version, pilots are able to get and learn tons of FPV knowledge via the popular open source Betaflight flight controller community. Both FC versions perform great in power and speed and feature higher-grade control modes for pilots to get advanced. Cetus FC Version Betaflight FC Version Flight Controller Cetus BL V3 FC F4 2S 15A V1.0 FC Receiver Protocol Frsky D8 ExpressLRS 2.4G Flight Mode N/S/M/Turtle Mode Angle/Horizon/Air/Turtle Mode VTX 25-350mW 25-400mW Position Hold Support Not Support Configuration Software BETAFPV Configurator Betaflight Configurator Note: FC (Betaflight FC Version) has been replaced from F4 1S 12A FC to F4 2S 15A V1.0 FC since Sep 2023. Auxiliary Flight Function Built-in highly precise barometer to detect the height, the version with Cetus FC benefits from great stability due to its position hold mode, and auto-hovering, which enables the drone to stay at the current height. This function also ensures an emergency landing of the drone whenever loses control or is on low battery. Meanwhile, its stable flight allows you to catch the best footage with the VR03 FPV Goggles very well. It really does an immense amount of fun and ease of flight for all pilots. Powered by 2S, Cetus X has loads of punch and speed, making it smoother and more suitable for outdoor practice, great for the next level. For indoor practice, the Cetus Pro with 1S power, which has the same auxiliary flight function, is easier for initial pilots to control and fly. Note: The position hold function is only available in N mode. Powerful Propulsion System Equipped with 1103 11000KV Brushless Motor and Gemfan 2020 4-blade props, Cetus X Brushless Quadcopter delivers powerful propulsion, making it a 2S power whoop drone with some real punch to it. Besides, the whole quadcopter is light and durable enough, offering pilots a high-efficiency flight experience. Recording Every Flight Moment Newly developed by BETAFPV, and based on VR02 FPV Goggles, the VR03 FPV Goggles take features of VR02 and come with a DVR recording function. Pilots can enjoy the playback saved through the goggles or export the videos by Micro SD card. This exciting function allows pilots to catch the memorably breathtaking moment, greatly heightening the FPV flying experience. Improved Video Transmission Cetus X comes with M04 25-400mW VTX and C04 FPV camera. Both VTX features a lightweight and adjustable output power for longer distance flying. Combining this VTX and the excellent radio link ExpressLRS 2.4G, pilots can fly whoop drones longer to explore more possibilities and have fun. In addition, C04 FPV camera (based on Caddx Nano Ant Camera/Runcam Nano 4) shows better quality in FPV flight compared with C02 FPV camera. LiteRadio 3 Radio Transmitter This transmitter features an ergonomically designed handle and has superb performance in its working time, a newly updated gimbal. Besides, this version supports BETAFPV Configurator, which is a utility designed to simply update, configure, and tune the radio controller. Experience the thrill of total immersion with unrivaled control and capture the world around you. FPV Simulator Supported First time flying a quadcopter? You can learn and practice flying a quadcopter through an FPV simulator before real flying. LiteRadio 3 is available to play FPV simulators like DRL/DCL/Uncrashed/Liftoff. More convenient for practicing and charging at the same time. Here is the display of Liftoff. Download Liftoff here. Note: This radio transmitter isn't compatible with Windows 11/Windows 10 systems running on AMD CPUs. If you wanna connect to a simulator, you will need to revert it to the ELRS 2.0 firmware. Various Modes, Accessible to All Cetus X (Betaflight FC) supports Angle/Horizon/Air Modes, which can satisfy the different needs of pilots and adapt to various flight environments. When the quadcopter falls to the ground and upside down, you can activate turtle mode by LiteRadio 3 transmitter to flip it over and resume flying.  The version with Cetus FC has N/M/S three flight modes and supports 3 different speeds with SLOW/MID/FAST. Whether you're a seasoned FPV pilot or a complete beginner, the Cetus X FPV Kit helps anyone fly confidently from day one. Note: The slow speed of Cetus FC version is not available on its M mode. BETAFPV Cetus Series BETAFPV Cetus Series has been very popular since its release in 2021 and become the primary FPV choice for new beginners. Whether propulsion system, radio transmitter, VTX range, or other functions, BETAFPV never stops step to make the product better. From the initial Cetus to Cetus X so far, Cetus Series always satisfies customers' needs no matter new beginners or seasoned pilots. Recommended Parts Frame: Cetus X Brushless Frame Battery: BT2.0 450mAh 1S 30C Battery, BT2.0 550mAh 1S Battery Props: Gemfan 2020 4-Blade Propellers Camera: C04 Camera and VTX Module FAQ Top questions that customers frequently asked about Cetus X. Download the User Manual for Cetus X FPV Kit (Betaflight F4 1S 12A FC version) Download the User Manual for Cetus X FPV Kit (Betaflight F4 2S 15A V1.0 FC version) Download the User Manual for Cetus X FPV Kit (Cetus FC version) Download the CLI dump file for Cetus X (Betaflight F4 1S 12A FC version) Download the CLI dump file for Cetus X (Betaflight F4 2S 15A V1.0 FC version) Download the CLI dump file for Cetus X (Cetus FC version) Please DO NOT configure ESC or Motor settings on the Betaflight configurator. The VR03 FPV goggles do not include a Micro SD card. You should prepare it before using the DVR recording function. The External TX module for LiteRadio 3 should be bought separately. Recommend BETAFPV Nano TX Module. Package 1 * Cetus X Brushless Quadcopter (Betaflight FC or Cetus FC Version) 1 * LiteRadio 3 Transmitter (ELRS 2.4G or Frsky) 1 * BETAFPV VR03 FPV Goggles    4 * BT2.0 450mAh 1S 75C Battery 1 * BT2.0 Battery Charger and Voltage Tester 1 * USB Charging Cable (Type-C) 1 * Type-C to FC Adapter 1 * Prop Removal Tool 4 * Gemfan 2020 4-Blades Prop (Spare Set) 2 * User Manual (Betaflight FC or Cetus FC Version) 1 * Portable Storage Bag

USD 309.99

You May Also Like