Cafelat Barista Robot Manual Espresso Maker
Coffee AddictsCoffee Addicts
4.0

Cafelat Barista Robot Manual Espresso Maker

CAD 599.00

Description

The Cafelat Barista Robot is a small and high-quality manual coffee maker that makes real espresso. It is made of premium materials like stainless steel and is completely plastic free. All you need is ground coffee, hot water from a kettle and you are all set. The whole process is simple and takes just a few minutes. The only difference between the Regular Robot and the Barista Robot is the pressure gauge.  If you are looking for the version without the pressure gauge, click here. Features: 58mm filter baskets: the same size as professional semi-automatic machines. The Robot comes with high a quality basket made by the same factory that makes all the best baskets in the world. Stainless Steel Tamper 1 piece stainless steel tamper designed and machined to precisely fit the basket with tapered side walls to prevent ground being sucked back when you lift the tamper. Pressure gauge A patent pending system takes the pressure reading from inside the basket.  Combined with the manual pressing of the lever arms, it enables you to manipulate pre-infusion,  flow and pressure in real-time to get the best from your coffee. Extraction pressure Ignore the magic 9 bar.  Traditional lever machines (as measured by Cafelat) typically extract at 6-7 bars, and since the basket and piston on the Robot are the same size, we suggest you initially aim for 6-7 bars as well and adjust as preferred. Temperature management The Robot is clearly not going to give you a La Marzocco type flat temperature profile.  But water off the boil poured into a gently pre-heated basket will yield approximately 95C water, and will give you up to 88C coffee output from the basket. Extraction ratios Certainly a 2:1 ratio of beverage mass to ground coffee is possible i.e. a 16g coffee dose can easily yield a 32g beverage weight. You can increase the beverage weight up to 40-45g if needed. Bottomless is best For best results we recommend using the portafilter without the spouts - but when using the pressurized basket it is best to use with the spouts to avoid splatters. It's a lever machine Lever machines can be very forgiving thanks to their gentle pre-infusion and the soft ramp up to full pressure.

Try this code on Cafelat Barista Robot Manual Espresso Maker

You could save on Coffee Addicts Cafelat Barista Robot Manual Espresso Maker with a Coffee Addicts promo code:

    Coffee Addicts logo

    25% off

    6 uses
    medium

    worked 7 months ago

    Score 25% off with promo code
View all Coffee Addicts coupons and promo codes

More Coffee Addicts Products

Bottomless Portafilter (7.2mm)

Bottomless Portafilter (7.2mm)

This aftermarket E61 bottomless or naked portafilter will fit most Aurora, Brasilia B61, Casadio, ECM, Elektra, Faema, Futurmat and Grimac (fins 7.2mm). Make sure that you measure the fins on your current portafilter to confirm fit, your machine might use a portafilter with thinner fins and need the Wega bottomless portafilter. Taste the difference a portafilter can make. The Barista can watch the coffee brew right from the bottom of the filter basket and immediately know if channeling occurs, signaling that a level tamp was not made, which makes this an invaluable tool for training.  Most Bottomless Portafilters will accept 21 gram triple baskets since portafilter body depth is no longer an issue. This item comes standard with a 58mm 21 gram triple basket, but will also accept any other "standard" sized portafilter basket. Don't like the hole at the end of the standard handle?  Add a chrome cap to complete the look of this portafilter. Still not convinced that you should own a bottomless portafilter?  Have a look at this great article by Perfect Daily Grind. Fins: 7.2mm Handle connection: M12 Handle material: Black plastic Portafilter material: Chrome covered brass Made in Italy

CAD 58.00

Bottomless Portafilter (6.4mm)

Bottomless Portafilter (6.4mm)

This aftermarket bottomless or naked portafilter will fit most Ascaso, Bianchi, BFC, Elektra, Fiorenzato CS, Isomac, MCE, Orchestrale, Quick Mill, Scala, SVC Italia, Wega and other E61 machines (fins 6.4mm). Make sure that you measure the fins on your current portafilter to confirm fit. Taste the difference a portafilter can make. The Barista can watch the coffee brew right from the bottom of the filter basket and immediately know if channeling occurs, signaling that a level tamp was not made, which makes this an invaluable tool for training.  Most Bottomless Portafilters will accept 21 gram triple baskets since portafilter body depth is no longer an issue. This item comes standard with a 58mm 21 gram triple basket, but will also accept any other "standard" sized portafilter basket. Don't like the hole at the end of the standard handle?  Add a chrome cap to complete the look of this portafilter. Still not convinced that you should own a bottomless portafilter?  Have a look at this great article by Perfect Daily Grind.

CAD 65.00

SSP Red Speed Lab Sweet 83mm Cast Burrs

SSP Red Speed Lab Sweet 83mm Cast Burrs

Premium burrset from SSP Grinding Solution with 83mm diameter size specifically designed for brewed coffee. This burrset is made of cast steel and ground used CBM diamond wheel, similarly to the Ditting Lab Sweet burrs. It features a custom geometry and a different top and bottom design typically only found on high end grinders.  These burrs ensure an optimal particle size spread within the grounds in order to achieve a consistent extraction and more sweetness inside the cup These SSP Red Speed burrs are always treated and do not require seasoning like other burrs.  They will bring a little bit slower until they are coated with coffee oils (5-10kg) but you don't need to grind 10lbs of rice before you start using them!  SSP also guarantees no chipped egdes or damaged edges which are known to cause poor consistency and short life time on regular burrs. Features: Material: Cast steel Rating:  5,000 kg (11,000 lbs) Fits Mazzer ZM, Mazzer Major, DF83

CAD 510.00

Rancilio Factory Cut Bottomless Portafilter (OEM) - New Design

Rancilio Factory Cut Bottomless Portafilter (OEM) - New Design

The is the new design factory cut, Original Equipment Manufacture (OEM) bottomless portafilter. These will fit any model of Rancilio (yes, the Silvia too), and any size Rancilio basket or other baskets that accept tamper bases of 58 mm.  Does not include a basket.

CAD 99.50

You May Also Like