BDS Suspension Traction Bar Kit 03-10 Ram 1500 | HD's w/ 3.5" Axle
Diesel Power ProductsDiesel Power Products
3.0

BDS Suspension Traction Bar Kit 03-10 Ram 1500 | HD's w/ 3.5" Axle

USD 624.95

Description

Get that power to the ground and avoid wheel hop with a set of stylish and strong BDS Traction Bars! Wheel hop resulting from axle wrap is something most of us have encountered at one point in time or another. There's nothing like leaving a stoplight to race the rig next to you or pulling a heavy load and have the entire truck turn to Jello, resulting in a loss of traction and available power to the ground. You can reduce pinion angle changes / axle wrap with these BDS heavy duty traction bars. Their tubular design provides loads of strength, coupled with an attractive appearance for under your truck. Kit comes complete with a pair of ladder bars, brackets, and necessary hardware.

Try this code on BDS Suspension Traction Bar Kit 03-10 Ram 1500 | HD's w/ 3.5" Axle

You could save on Diesel Power Products BDS Suspension Traction Bar Kit 03-10 Ram 1500 | HD's w/ 3.5" Axle with a Diesel Power Products promo code:

    Diesel Power Products logo

    35% off

    330 uses
    high

    worked 5 months ago

    At Diesel Power Products Up to 35% OFF Orders
View all Diesel Power Products coupons and promo codes

More Diesel Power Products Products

NOS Diesel Nitrous Dry System With Mini 2-Stage Controller 15 lb Blue Or Black Bottle

NOS Diesel Nitrous Dry System With Mini 2-Stage Controller 15 lb Blue Or Black Bottle

Take your diesel game to a whole new level with the NOS Diesel Nitrous System, the ultimate upgrade for turning heads and shredding tires. If your Duramax, Cummins, or Powerstroke already feels strong, just wait until you hit it with some laughing gas, spray, or happy gas. This system injects pure adrenaline (aka gobs of oxygen) into your truck, delivering insane torque and horsepower gains. Whether you're stock or tuned, this kit has you covered.Packed with everything you need to dominate the competition, the kit includes your choice of either the iconic NOS blue or sleek black 15 lb bottle, rugged brackets, a Super ProShot solenoid, a nitrous feed line, and all the wiring for a smooth setup. Adjustable horsepower settings mean you can start with a 75HP bump on a stock setup and take it all the way up to a tire-melting 150HP with the right mods and a nitrous-specific tune.The NOS Mini 2-Stage Controller takes this system to another level. With this advanced electronic controller, you can customize and manage how your nitrous flows, delivering smoother power and ultimate control. The Mini 2-Stage Controller allows you to program the nitrous activation in two stages: start small for traction off the line, then unleash the full nitrous fury once you’re rolling. It’s the ultimate tool for dialing in your performance and maximizing both safety and power delivery. This is race-ready gear, built for Racing Use Only Vehicles, trucks made exclusively for competition, unregistered, and never street-driven. Remember, it’s a no-go for emissions-controlled rides. Keep it legal and keep it on the track. For those running the higher settings, NOS recommends pairing this with a tuned-up ECU and a solid fuel system to make sure your diesel doesn’t just perform well, it dominates. When you’re ready to spray, crack that bottle of giggle juice, squeeze the throttle, and feel the rush of pure power. From nozzle to the bottle, with the precision of the Mini 2-Stage Controller, this setup brings all the nitrous heat you need to crush the competition and make your ride the king of the strip.

USD 1299.95

Industrial Injection Dual CP3 Kit 07.5-18 Dodge 6.7L Cummins

Industrial Injection Dual CP3 Kit 07.5-18 Dodge 6.7L Cummins

If you are in need for some serious fueling for your Cummins, and simply aren't getting enough fuel through your stock CP3, we have just the answer The Industrial Injection Dual CP3 is the ultimate for performance. This kit is offered in three different ways. First, you can opt for their kit that includes everything, except for the CP3, so you can source your own. Next, you can choose their kit that includes all hardware AND a stock Duramax pump (Duramax pump is used as opposed to a Dodge pump simply because they flow significantly more than the Dodge pump). Finally, their "Dragon Fire" upgrade kit is offered with a single 85% flow Dragon Fire CP3, which is great for those needing even more fueling than the standard D-Max pump setup. By upgrading to a dual CP3 Kit, the user can achieve an increased level of efficiency and reduced EGT while providing enough fuel to make over 1200 HP. This is achieved with constant optimum fuel pressure allowing for better atomization of the diesel fuel, resulting in a more complete combustion and full burn. To ensure that each pump works properly with each other, a Microprocessor control module is sent with each kit. This control module will control the fuel delivery, splitting the required fuel between both pumps, decreasing the demand of the stock pump by 50% and increasing the life of the pump. As an added safety feature, should either pump fail, the control module will automatically switch full fuel delivery to the remaining, functioning pump

USD 3671.40

Carli Suspension 3" Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins

Carli Suspension 3" Front Leveling Kit 94-02 Dodge Ram 5.9L Cummins

Utilizing Carli's multi-rate coil springs that add 3 inches of ride height to the front of your Dodge Ram and custom Carli Signature Series shock absorbers plus options for your sway bar, this kit is SO much more than your traditional "leveling kit." The Leveling System was designed for people seeking a leveled vehicle with more performance and ride quality than a generic spacer lift. The Carli Signature Series front shocks have been custom tuned, in-house by Carli, for superior ride quality. CARLI SIGNATURE SERIES SHOCKS Your truck will sit 2.5"-3" higher in the front with 50% more suspension travel than the factory platform thanks to the taller, lighter rate coil springs. The included, front, Carli Signature Series Shocks are longer to accommodate the extended travel. When designing the shocks, Zinc plating, Clear Coat for corrosion resistance and quality bushings were a must; finished off with boots to protect the shafts, Carli backs them with a limited lifetime warranty to ensure their quality is as unbeatable as their ride quality at this price point. SWAY BAR OPTIONSWhen pairing added down-travel with the taller ride height, the position of the factory sway bar will need to be altered as well. For this, you can choose to include extended, Sway Bar End Links. The End links are equipped with 1/2" FK Rod-Ends and in-house machined 17-4 stainless bodies that are extended over stock to reset the sway bar engagement point. Factory pillow bushings are re-used to assemble the sway bar to the lengthened link. 1994-1998 RAM 2500 / 3500 SWAY BAR  END LINKS SPECIFICATIONS: Machined out of 17-4 Stainless Steel FK Bearing, Chromoly Rod-End 1998.5-2009 RAM 2500 / 3500 SWAY BAR  END LINKS SPECIFICATIONS: In-house machined 17-4 Stainless Steel 1/2" FK Chromoly Rod-End ADJUSTABLE TRACK BAR RECOMMENDEDWhen lifting the front end of a straight axle truck, the front axle is pulled off-center unless the proper linkages are addressed. Three inches of front lift equates to an axle shifted toward the driver's side 3/4" and back toward the cab 1/2". Although this is perfectly operable, we recommend the purchase of an adjustable track bar and relocation bracket to shift the axle back toward the passenger side and provide a stronger link with less deflection for the lifted application, and a set of extended control arms to shift the axle forward to its new center of travel. IMPORTANT NOTES: WHEELS: Carli Recommends a 17"-18" Wheel, no more than 9" wide with 5.75" of Backspacing on Leveling Systems TIRES 35", E-Rated Tire Fitment is Recommended. Recommended unloaded Tire Pressure 45F/40R RECOMMENDED CONFIGURATION: Carli Leveling Systems are Designed and Tested on Vehicles with 17"-18" Wheels with 37", E-Rated Tires. Stock wheels and tires or running a larger wheel diameter will result in a stiffer ride. WHEEL AND TIRE NOTES: This system will fit up to a 35" tire with stock control arms (we recommend purchasing our extended, Mild Steel Control Arms) on wheels with 5.75-6" of backspacing. If running factory wheels, we recommend an All Terrain 35" tire to avoid rubbing.  For 37" tire fitment, our High-Clearance Control Arms and Adjustable Track Bar can be paired to a wheel with 5.75" of Backspacing. The more rubber, the better the small bump compliance will be at proper inflation pressures. The ride will firm up as you go larger in wheel diameter. IMPORTANT NOTES: NO SWAY BAR OPTION NOTES:Diesel Power Products and Carli strongly suggest the use of either options available. These options are designed to work flawlessly with the rest of your kit and, are the best way to go. However, we understand you may already have the necessary provisions and/or products to use with this kit so we give you the option to not include any sway bar drop or Torsion Sway Bar provisions.

USD 917.00

MBRP Armor Lite Aluminized Muffler Delete Pipe 5" Inlet / Outlet 31" Overall MDA531

MBRP Armor Lite Aluminized Muffler Delete Pipe 5" Inlet / Outlet 31" Overall MDA531

There are always those purists who push the envelope in their pursuit of maximum performance. It is for these true enthusiasts that MBRP builds what is one of the most extensive line-ups of muffler deletes in the industry. Extreme performance and extreme sound can be yours. Features 5" I.D. (flared) on both ends.

USD 89.99

You May Also Like