2007-2018 Jeep Wrangler JK Full-Length Roof Rack
DV8 OffroadDV8 Offroad
3.0

2007-2018 Jeep Wrangler JK Full-Length Roof Rack

USD 699.99

Description

This full-length Wrangler JK Roof Rack is perfect for mounting a roof top tent for your overland adventures. If you’re not running a tent, it features multiple tie-down points on each side to secure luggage and other cargo. On top of each of the 4 side rails are multiple accessory mounts for lighting options, action camera, antenna, a shovel, or whatever you want to pack with you. The rack supports 300 lbs evenly distributed.Constructed from 2mm & 3mm plate steel, it was finished in a micro-texture black powder coat to resist the elements. It features multiple mounting points for increased strength, and arc’d cross bars for increased cargo capacity. No drilling or modifications are necessary, as it features a bolt-on installation.Key Features:300 lb Capacity Evenly DistributedMounts Directly to Rain GuttersCan Support a Full Size Roof Top TentTie Down Points on all SidesAccessory Mounting Points Atop All 4 Side RailsMicro-Texture Black Powder Coat FinishNo Drilling RequiredBolt-On InstallationPlease Note: This was designed for the 4-Door Wrangler JK only, it does not fit 2-Door models. Compatible only with the factory hard top.

DV8 Offroad promo code

You could save on DV8 Offroad 2007-2018 Jeep Wrangler JK Full-Length Roof Rack with a DV8 Offroad promo code:

    DV8 Offroad logo

    10% off

    72 uses
    high

    worked 6 months ago

    10% Off Save More at DV8 Offroad
View all DV8 Offroad coupons and promo codes

More DV8 Offroad Products

3-Inch Elite Series LED Pod Light

3-Inch Elite Series LED Pod Light

The DV8 Elite Series of LED Pod Lights are a perfect addition to your primary lighting when exploring in the dark. These new cube lights feature a bezel-less housing and small heat fins for a sleek and stylish finish. The OSRAM LEDs provide significant brightness and are rated to 50,000 hours. Our indirect reflector improves the direction of the light and reduces glaring and hotspots. The UV-resistant lens is shatterproof and designed to whisk away ice and water. These LED Lights have an IP68 rating - They are highly resistant to dust, dirt, sand and water.Features:Size: 3” x 3” x 2.75”Flood Light Pattern4,800 Lumens40 Total WattsShatterproof Polycarbonate UV Resistant LensOSRAM P9 LEDs Rated at 50,000 Hours of UseBezel-less Housing with Heat FinsIP68 Rated - Resistant to Water and Dust1 Year WarrantyDo you need a wiring harness for this? Check out our Light Wiring Harness.

USD 59.99

2021-2024 Ford Bronco | Competition Series Rear Bumper

2021-2024 Ford Bronco | Competition Series Rear Bumper

DV8 Offroad's 6th Gen Bronco Competition Series Rear Bumper is a tough and stylish bumper that's perfect for your off-road rig. This low-profile bumper is constructed from steel tube and plate, and was inspired by desert racing. It features light mounts for 3-inch LED light pods, so you can light up the trail behind you in dark conditions. With its low-profile design, you can fit up to a 37-inch spare tire.The OEM reverse sensors are integrated into the bumper via mounting holes, so you retain full functionality of the feature. If your model does not have parking sensors, we provide plugs to cover the holes. Additionally, it accommodates the factory hitch. Toward each end of the Competition Series are two paintable aluminum accent panels that help cut weight, and compliment the style of the bumper. Installation is a simple bolt-on process and an install guide can be found below.Mix and match any DV8 front & rear bumper to fit your style. Our bumpers were designed to look great together no matter which combination you choose.Key Features: Low-Profile Desert Racing DesignTube & Plate Steel ConstructionTwo Light Mounts that Fit 3” Light PodsIncludes Tailgate Mounted License Plate BracketFits up to 37” Spare TirePaintable Aluminum Accent PanelsRetains Full Functionality of OEM Backup SensorsAccommodates Factory Tow HitchBolt-On InstallationMinor Wiring Required During Install

USD 999.99

2018-2025 Jeep Wrangler JL | Rear Speaker & Light Bar Mount

2018-2025 Jeep Wrangler JL | Rear Speaker & Light Bar Mount

Elevate your Jeep Wrangler's audio and lighting capabilities with our Jeep Wrangler Rear Speaker & Light Bar Mount. Crafted with a sturdy 2-inch diameter tube, this mount offers a secure and precise fit for mounting speaker cans using roll bar clamps. Designed for versatility, our mount also features a dedicated mounting point for a rear-facing single row light bar, capable of accommodating up to 20 inches in length. Illuminate the path behind you with powerful rear-facing lighting, ensuring safety and visibility during your off-road adventures. We've gone the extra mile to ensure clean wire management, providing you with provisions for a clutter-free and professional-looking installation.We've included additional mounting holes that provide endless possibilities for attaching accessories such as a Hi-Lift jack or additional speakers or lights, allowing you to personalize your Jeep your way. Installing our mount is simple, requiring only four bolts to securely mount it in place. Key Features:2” Diameter TubeMounts Roll Bar Clamp Speaker SystemsMounting Point for 20” Light BarMounting Holes for Hi-Lift, Additional Speakers, & MoreProvisions for Wire RoutingMicro-Texture Black Powder CoatSimple Installation* Please Note: This was designed for 4-Door Models only, this will not fit 2-Door Jeeps.** Please Note: This is compatible with Hard Tops only, it cannot be installed in conjunction with a soft top.

USD 199.99

2024+ Toyota Tacoma | Centric Front Bumper

2024+ Toyota Tacoma | Centric Front Bumper

The Centric 4th Gen Tacoma Front Bumper provides lighting and recovery options, so you are prepared for any situation. The center mount design compliments the lines of your Tacoma without sacrificing durability and utility. Add supplemental lighting by mounting a 20-inch single row light bar and two 3-inch pod lights. Compatible with a wide range of standard sized heavy duty winches. Attach two 1-inch thick D-rings to complete your recovery capabilities. Our Winch Front Bumper is made with 3, 3.5, and 5mm plate steel for a robust construction that is built to protect the front of your rig from obstacles. Finished in a durable micro-texture black powder coat to prevent scratches and rust. Compatible with OEM sensors, cameras, fog lights, and adaptive cruise control. Installation is easy with minimal cutting required. The integrated zip tie tabs allow you to effectively organize your light wiring.* Please Note: The bumper does not fit the front factory skid plate.** Please Note: We have not confirmed fitment on the Hybrid engine option, TRD Pro, or Trail Hunter trim levels.KEY FEATURES:Accepts Various Standard Sized Heavy Duty Winches(2) 1” Thick D-Ring Mounts that Accept a 7/8“ PinMounts (2) 3” Pod LightsMounts (1) 20” Single Row Light BarWelded-In Zip Tie Tabs for Wire ManagementRetains OEM Sensors, Fog Lights, Cameras, and Adaptive Cruise ControlMade out of 3, 3.5, & 5mm Plate SteelMicro-Texture Black Powder Coat FinishMinimal Cutting Required

USD 699.99

You May Also Like

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set This two-cup and teapot combo packs light for travel and looks beautiful on a desk at home or at work. The set features: One teapot, complete with lid and built-in filter; Two nicely-sized cups that fit snug on top and bottom of the pot; Carrying case for travel and storage; Circular wooden button-style handles; Small rectangular tea towel. When I worked in Beijing at the Nature Conservancy, I saw a lot of office workers would keep a cup-pot combo on hand so they could brew great tea without cluttering up their work space. Needless to say, I got one myself too. It’s a great fit for: Home-office tea-making; Picnic/travel tea-making; Tea friends with less space for storing tea equipment; Tea Party Size? This set is best for personal use or with one partner (1-2 people).   @yourteaguy Would you the cup pot combo? #tea #teatime #celtics #basketball #teapot #happytime #jessesteahouse ♬ Pieces (Solo Piano Version) - Danilo Stankovic       Save on tea with this teapot! Purchase the pot and sampler combo from the drop-down menu above to save $5 on a tea sampler! Jesse’s Review: This cup-pot combo is straight-up a great way to make tea. It’s very practical and yet the results are still top-tier. If you don’t have the space, time, or energy for a full Gongfu-style tea set, this is for you. I keep one of these on my desk at home in case I need to really get work done and can’t do the whole tea ceremony, and I also have a second set just for traveling and taking to friends’ houses. One note - because this set doesn’t come with a pitcher, you need to be sure to only add as much water as you need to drink your next cup. Otherwise, you will be left with extra tea inside the pot which keeps over-steeping. Don’t Forget Your Tea Pets! It’s not gongfu tea time without a tea pet! Check out the tea pets and add one to your order!   Jesse's Quality Guarantee! When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 40.00

Jesse's Teahouse
Jesse's Teahouse