Eastwood HotCoat® PCS-250 Dual Voltage Powder Coating Gun Starter Kit

Name: Eastwood HotCoat® PCS-250 Dual Voltage Powder Coating Gun Starter Kit
Brand: Eastwood
Price: 179.97 USD
Availability: InStock

USD 179.97

Description

Eastwood PCS-250 Dual Voltage Powder Coating Gun The Eastwood PCS-250 Dual-Voltage HotCoat™ Powder Coating Gun gives you complete coverage from tight areas to large surfaces while operating on standard 120v household current. This innovative system will allow you to achieve the benefits of powder coating small parts instead of coating them with paint. This new and improved dual-voltage system gives you the capability to coat small areas using the low 15kv setting or coat large areas using the high-voltage setting 25kv. All you need is a compressed air source (5-10 PSI from a portable tank with a regulator or a compressor) to power your gun, an electric oven or toaster oven to cure the finish and a well-ventilated workspace in which to do your coating. This new and improved gun features color-coded cabling, larger ground clamp, increased trigger room and a clear bottle so you can see the powder color and fluidizing action. Extremely durable finish Coat and cure in under an hour! Easy to apply Quick color changes Economical Operates on standard 120v / 60Hz household current Versatility with two settings for improved coverage Low 15,000-volt setting High 25,000-volt setting for multi-coat coverage over larger areas Increased powder adhesion Minimal overspray Color-Coded cables for easy setup More trigger-room for additional comfort Larger ground clamp Clear bottle allows you to see powder color, level and fluidizing action Larger internal passages for improved powder flow Refined power supply for more consistent coverage and powder-build Eastwood Powder Coating Accessories Kit This accessories kit comes with the items you need to start powder coating. The high temperature tape and silicone plugs make it easy to mask areas you do not want to get powder on. The safety wire is great for hanging parts on your powder coating rack or oven. This kit also comes with an in-line air filter to keep contaminates out of your gun and powder. Also included is an 8 oz. bottle of high gloss black powder and extra storage bottles.

Eastwood deal

You could save on Eastwood Eastwood HotCoat® PCS-250 Dual Voltage Powder Coating Gun Starter Kit with a Eastwood promo code:

10% off

16 uses

high

worked 9 months ago

10% Off Storewide at Eastwood

View all Eastwood coupons and promo codes

More Eastwood Products

Eastwood Air In Line Air Filter

Package of 2 Eastwood Air In Line Air Filter. Provides Clean Air to Pneumatic Equipment Maximum Air Flow 15 CFM Maximum Working Pressure 70 psi

USD 15.99

Eastwood Extreme Chassis Black Primer

For a more durable Extreme Chassis Black® finish on bare metal, start with this Extreme Chassis Black® Primer. Once your chassis is stripped of old paint and surface rust, apply Eastwood Extreme Chassis Black® Primer as the foundation for a lasting finish. This black metal primer is specifically formulated for use with Eastwood Original Chassis Black Paint and Extreme Chassis Black. We’ve fortified the primer with epoxy to give it impressive adhesion and seal against corrosion. The black-under-black also means fewer coats of Chassis Black paint are needed to achieve the final look. Eastwood has bare chassis primer in one-quart cans for use with a paint gun or in 14-oz. aerosol spray cans. Both are formulated for use on undercarriage parts that are exposed to higher temperatures and stress than body panels. It’s a great choice on frames that have been stripped or media blasted, and you can also apply Chassis Black primer over existing finishes. Learn more about the Chassis Black system and our entire line of suspension paints by visiting the Eastwood Garage or calling the tech team at 1-800-343-9353. We’ll help you Do the Job Right on any restoration, repair job or custom build. Eastwood Extreme Chassis Black Primer Features: Maximizes adhesionImproves chip resistance14-oz. aerosol covers 8 sq. ft.; 1-qt. can covers 30 sq. ft.2%-10% Gloss Level Epoxy-fortified primer is the perfect foundation formulated specifically for Extreme Chassis Black® and Original Chassis Black.

USD 24.99

Eastwood PRE Painting Prep

@media only screen and (min-width: 480px) { img[class=mobimage01]{ width:100% !important; height:inherit !important; float:top !important; } .product-tabs .product-tab-content h3 { background-color: #fbf9f1; color: black; font-weight: bold; padding: 0.2em 0.3em; margin-bottom: 0.2em; text-transform: uppercase; font-size: 1.25em; } } The final step in surface paint preparation—Eastwood's PRE™ Paint Prep—just spray or wipe on, and wipe off! Removes silicone, wax, polish, grease and dirt Helps promote paint adhesion Easy spray-on, wipe-off application Available in aerosol, 30-oz., or gallon Available in a Low-VOC formula for regulated areas If you're looking for a 50 State Compliant cleaner and degreaser that's available in both bottles and pre-soaked wipes, you need to check out Eastwood PRE GREEN Paint Prep that has no harsh chemicals. Proper surface preparation is one of the most important factors in helping you achieve a high-quality final finish. Our specially formulated PRE Paint Prep helps you prepare a surface for painting by removing dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for final painting or powder-coating. Auto paint prep gets no easier! PRE Painting Prep is very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface that could interfere with paint adhesion. A "Low-VOC" PRE Painting Prep Formula, #11949Z, is available for shipment to California. Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.

USD 33.99

Eastwood Extreme Chassis Black Gloss Frame Paint Coating

Extreme Chassis Black Gloss has 3X the resins of traditional undercoatings, so it's tough enough for any undercarriage component. Helps seal rust, and improves resistance against chips and scratchesMatches OEM automotive paintApply multiple coats without lifting11172Z: 14-oz. Aerosol provides 8-sq. ft. coverage 11173Z: Quart provides 40-sq. ft. coverage 33992ZP: Gallon provides 160-sq. ft. coverage85% + Gloss Level You spend hours prepping your frame and suspension parts; now top-coat them with a tough, OEM-matching, glossy black chassis paint that provides extreme durability! 3X more resins make it 3X more durable than our original Chassis Black. Help exposed chassis and suspension parts last by using our premium automotive frame paint. Eastwood Extreme Chassis Black is the best undercoat for black gloss factory restorations and custom cars. It contains three times as many epoxy resins as Original Chassis Black, giving parts additional protection against scratches, corrosion and chemicals. The special formula also seals and prevents rust — particularly when used in combination with Eastwood Rust Encapsulator Platinum. And it lasts through the extremes of summer and winter driving so you’ll never have to worry about if the frame is sound.Add this heavy-duty chassis undercoating to any new or well-loved undercarriage parts that you want to last. The 85% gloss level produces a bright OEM shine that looks amazing when a show-goer crawls underneath. A one-quart can will cover an average vehicle frame. Get an aerosol spray can for touch-up work or a one-gallon can if you have multiple cars to coat. For the best results, apply Extreme Chassis Black Primer to the bare metal before painting. We back our professional-quality coatings with a 100% customer satisfaction guarantee. Note: This paint can not be applied over top of self-etching primers. Also available in satin: Click Here 3 times more resins make it 3X more durable than our original Chassis Black coating. This maximum-durability, 85%-gloss auto chassis paint formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches. Average-sized frame typically requires 24 to 40 sq. ft. of coverage.For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; quart can 11194ZP; or gallon can 11195ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.

USD 43.97