VIM Tools Digital Angle & Torque Meter 3/8 in. and 1/2 in. Drive DATM1238
EastwoodEastwood
3.0

VIM Tools Digital Angle & Torque Meter 3/8 in. and 1/2 in. Drive DATM1238

USD 125.78

Description

Digital angle & torque meter 3/8 in. + 1/2 in. dr. Turns any ratchet or breaker bar into a torque / angle measuring tool. Compact and lightweight, easy to use, you can take it everywhere in your toolbox. Can be used to recalibrate any type of torque wrench. 30 memory settings for torque reading and 30 for angle reading. Peak and track mode for torque reading and ratchet mode for angle reading. Color changing display and audible alarm to indicate progress when reaching target value (green backlight below 80%, orange above 80% and red at 100% or above) 180° view flip screen. Large LCD display with LED backlight. Clockwise and counterclockwise operation. Power saving mode after 2 minutes of inactivity. Battery life indicator. Weight 3 lbs Dimensions 6 × 3 × 3 in Case Quantity 1 Bar Codes 0-92308-31238-1 Country Origin Taiwan

Get a deal on VIM Tools Digital Angle & Torque Meter 3/8 in. and 1/2 in. Drive DATM1238

You could save on Eastwood VIM Tools Digital Angle & Torque Meter 3/8 in. and 1/2 in. Drive DATM1238 with a Eastwood promo code:

    Eastwood logo

    10% off

    16 uses
    high

    worked 6 months ago

    10% Off Storewide at Eastwood
View all Eastwood coupons and promo codes

More Eastwood Products

Eastwood Air In Line Air Filter

Eastwood Air In Line Air Filter

Package of 2 Eastwood Air In Line Air Filter. Provides Clean Air to Pneumatic Equipment Maximum Air Flow 15 CFM Maximum Working Pressure 70 psi

USD 15.99

Eastwood Extreme Chassis Black Primer

Eastwood Extreme Chassis Black Primer

For a more durable Extreme Chassis Black® finish on bare metal, start with this Extreme Chassis Black® Primer. Once your chassis is stripped of old paint and surface rust, apply Eastwood Extreme Chassis Black® Primer as the foundation for a lasting finish. This black metal primer is specifically formulated for use with Eastwood Original Chassis Black Paint and Extreme Chassis Black. We’ve fortified the primer with epoxy to give it impressive adhesion and seal against corrosion. The black-under-black also means fewer coats of Chassis Black paint are needed to achieve the final look. Eastwood has bare chassis primer in one-quart cans for use with a paint gun or in 14-oz. aerosol spray cans. Both are formulated for use on undercarriage parts that are exposed to higher temperatures and stress than body panels. It’s a great choice on frames that have been stripped or media blasted, and you can also apply Chassis Black primer over existing finishes. Learn more about the Chassis Black system and our entire line of suspension paints by visiting the Eastwood Garage or calling the tech team at 1-800-343-9353. We’ll help you Do the Job Right on any restoration, repair job or custom build. Eastwood Extreme Chassis Black Primer Features: Maximizes adhesionImproves chip resistance14-oz. aerosol covers 8 sq. ft.; 1-qt. can covers 30 sq. ft.2%-10% Gloss Level Epoxy-fortified primer is the perfect foundation formulated specifically for Extreme Chassis Black® and Original Chassis Black.

USD 24.99

Eastwood PRE Painting Prep

Eastwood PRE Painting Prep

@media only screen and (min-width: 480px) { img[class=mobimage01]{ width:100% !important; height:inherit !important; float:top !important; } .product-tabs .product-tab-content h3 { background-color: #fbf9f1; color: black; font-weight: bold; padding: 0.2em 0.3em; margin-bottom: 0.2em; text-transform: uppercase; font-size: 1.25em; } } The final step in surface paint preparation—Eastwood's PRE™ Paint Prep—just spray or wipe on, and wipe off! Removes silicone, wax, polish, grease and dirt Helps promote paint adhesion Easy spray-on, wipe-off application Available in aerosol, 30-oz., or gallon Available in a Low-VOC formula for regulated areas If you're looking for a 50 State Compliant cleaner and degreaser that's available in both bottles and pre-soaked wipes, you need to check out Eastwood PRE GREEN Paint Prep that has no harsh chemicals. Proper surface preparation is one of the most important factors in helping you achieve a high-quality final finish. Our specially formulated PRE Paint Prep helps you prepare a surface for painting by removing dirt, wax, polish, grease, silicone, buffing compound, even road tar, ensuring a clean surface that's ready for final painting or powder-coating. Auto paint prep gets no easier! PRE Painting Prep is very easy to use: just spray it on and wipe it off. Works better than lacquer thinner, which can leave a thin residue on the surface that could interfere with paint adhesion. A "Low-VOC" PRE Painting Prep Formula, #11949Z, is available for shipment to California. Not for sale or use in California. Eastwood Paints are formulated to meet National Rule VOC regulations, check with your local and state guidelines as some areas may have stricter regulations than others.

USD 33.99

Eastwood Extreme Chassis Black Gloss Frame Paint Coating

Eastwood Extreme Chassis Black Gloss Frame Paint Coating

Extreme Chassis Black Gloss has 3X the resins of traditional undercoatings, so it's tough enough for any undercarriage component. Helps seal rust, and improves resistance against chips and scratchesMatches OEM automotive paintApply multiple coats without lifting11172Z: 14-oz. Aerosol provides 8-sq. ft. coverage 11173Z: Quart provides 40-sq. ft. coverage 33992ZP: Gallon provides 160-sq. ft. coverage85% + Gloss Level You spend hours prepping your frame and suspension parts; now top-coat them with a tough, OEM-matching, glossy black chassis paint that provides extreme durability! 3X more resins make it 3X more durable than our original Chassis Black. Help exposed chassis and suspension parts last by using our premium automotive frame paint. Eastwood Extreme Chassis Black is the best undercoat for black gloss factory restorations and custom cars. It contains three times as many epoxy resins as Original Chassis Black, giving parts additional protection against scratches, corrosion and chemicals. The special formula also seals and prevents rust — particularly when used in combination with Eastwood Rust Encapsulator Platinum. And it lasts through the extremes of summer and winter driving so you’ll never have to worry about if the frame is sound.Add this heavy-duty chassis undercoating to any new or well-loved undercarriage parts that you want to last. The 85% gloss level produces a bright OEM shine that looks amazing when a show-goer crawls underneath. A one-quart can will cover an average vehicle frame. Get an aerosol spray can for touch-up work or a one-gallon can if you have multiple cars to coat. For the best results, apply Extreme Chassis Black Primer to the bare metal before painting. We back our professional-quality coatings with a 100% customer satisfaction guarantee. Note: This paint can not be applied over top of self-etching primers. Also available in satin: Click Here 3 times more resins make it 3X more durable than our original Chassis Black coating. This maximum-durability, 85%-gloss auto chassis paint formula offers improved resistance to brake fluid, fuel, solvent, chips and scratches. Average-sized frame typically requires 24 to 40 sq. ft. of coverage.For improved adhesion on clean, bare metal, first prime with Extreme Chassis Black Primer (aerosol 11193Z; quart can 11194ZP; or gallon can 11195ZP). For rusted metal, first prime with Eastwood Rust Encapsulator. Allow 15-20 minutes between coats of Extreme Chassis Black; can be re-coated at any time without lifting.

USD 43.97

You May Also Like