FMS 1700mm PA-18 Super Cub PNP with Reflex V2

USD 299.99

Description

The Piper PA-18 Super Cub is a two-seat, single-engine monoplane. It was developed from the Piper PA-11. In close to 40 years of production, over 9,000 were built. Super Cubs are commonly found in roles such as bush flying, banner towing and glider towing.As a relative of the popular 1400mm J-3 Cub, the 1700mm PA-18 Super Cub retains great flight characteristics while offering increased power and wingspan.Thanks to its functional flaps, high-lift airfoil, rugged landing gear and oversized balloon tires- the 1700mm PA-18 Super Cub has impressive short take-off and landing (STOL) performance, allowing it to operate from just about any terrain.Utilizing the latest FMS hardware and design, the 1700mm PA-18 Super Cub has pre-installed ball-link type pushrods, integrated servo connectors in the wing structure and can be assembled very easily using no glue at all. For pilots wanting to get the genuine bush-plane experience, the PA-18 Super Cub can be equipped with floats. Versatile, fun and exceptionally relaxing to fly- the 1700mm PA-18 Super Cub is a great addition to any fleet! Notes to buyers: RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included. Specification Wingspan 1700MM/66.9in Overall length 1136MM/44.7in Flying weight 2100g Motor size 3541-KV750 ESC 45A Servo 17g*6 Radio 6 Channel CG (center of gravity) 80-85mm(From leading edge) Prop Size 12*7.5, 2-blade Recommended battery 14.8V 2200-2600mAh 4s 35C Battery Connector XT60 Aileron Yes Elevator Yes Rudder Yes Flaps Yes Retracts No LED Yes Approx. flying duration 4-5 minutes Minimum age recommendation 14+ Experience level intermediate Assembly time around 40 minutes Wing load 50g/dm²； 0.11oz/in2 Wing area 42dm² ；651sq.in

Get a promo code on FMS 1700mm PA-18 Super Cub PNP with Reflex V2

You could save on FMS FMS 1700mm PA-18 Super Cub PNP with Reflex V2 with a FMS promo code:

15% off

2355 uses

high

worked 6 months ago

15% Off Storewide at FMS

View all FMS coupons and promo codes

More FMS Products

FMS 1:24 FCX24 Chevrolet K5 Blazer RTR

Cruise trails in 1:24 RC K5 Blazer. Realistic detail, ready-to-run. Adventure awaits!

USD 149.99

ROCHOBBY 1:7 Ridge Racer U4 Desert Buggy RS

Ridge Racer U4 - 1:7 Scale Offroad Desert Buggy In the vast expanse of the desert, every inch of terrain is your battleground, every sprint is a challenge to your limits. Get ready to embark on a new adventure! Introducing the Ridge Racer U4 - 1:7 Scale Brushless Offroad Desert Buggy, your ultimate tool for desert exploration! The Ridge Racer U4 is our first 1:7 scale model, offering a large size that brings a whole new desert adventure experience. Whether tackling desert hills or conquering sand dunes, this buggy will be your perfect companion. Different from before, the Ridge Racer U4 features the latest brushless technology, providing you with unparalleled power and speed. Feel the rush as gravel splashes under the wheels! What's in the box: 1 x 1:7 Ridge Racer U4 RS 1 x 2.4G Transmitter + Receiver (installed) 1 x Brushless Motor 4274 1600KV (installed) 1 x Brushless 150A ESC (installed) 1 x Bronco Logo sticker 1 x Product Manual Need to Complete: 4 x AA Batteries for Transmitter Battery & Charger for Kit (Recommended 3S Lipo 11.1V 7200mAh 60C With EC5 Connector x2) 6S Battery: For speed lovers, pair 1:7 Ridge Racer U4 with 6S battery for high-speed thrills up to 50 mph. 4S Battery: For superior control, choose a 4S battery for your RC car's precision handling. Specification: Length 640mm Width 379mm Height 275mm Wheelbase 425mm Tire F/R Φ 145*56mm Weight 5.9KG ESC 150A Motor 4274 1600KV Battery Box Size 181*47.5MM Drivetrain 4WD Speed Up to 80km/h Radio Control 2.4GHz 5-Channel Remote with 3-Axis Gyroscope Suspension Independent Front Suspension With A Solid-Axle Gear ratio 11T Pinion Gear11T : 1:14.5512T Pinion Gear12T :1:13.3413T Pinion Gear13T : 1:12.31

USD 549.99

FMS 2500mm ASW-17 EP Glider PNP

FMS is proud to announce the brand-new 2500mm ASW-17! World champion pilot Daniel Aeberli joins model aircraft manufacturer FMS in creating the world's first scale performance foam glider- the ASW-17. True to the FMS spirit, no detail was overlooked in the design of the ASW-17. The FMS engineers made 4 expensive tooling adjustments just to micro-adjust the airfoil for perfect efficiency. The wing, vertical and horizontal stabilizers are designed with a snap-together structure. With a simple snap, the surfaces attach to the fuselage with pinpoint precision- no screws or glue necessary! Build the aircraft in as little as 3 minutes! Like the 3000mm Fox, the ASW-17 has a pre-installed carbon fiber spar that ensures wing rigidity in high-G maneuvers. To achieve the same dihedral as the real aircraft, the ASW-17 was designed with a specialized CNC aluminum spar joiner- allowing the aircraft to maintain its wing geometry during demanding flight routines. Performance-wise, a high-quality Hobbywing 40A ESC paired with a Predator 3541-750KV motor provides ample power with a 4S pack to perform most aerobatic maneuvers. If efficiency, stability and aerobatic capabilities are what you seek in a glider, look no further than the FMS 2500mm ASW-17! Notes to buyers: RTF (Ready to Fly) airplanes come with everything you need to fly in the box. A transmitter, receiver, battery, charger, and all other required electronics are included and pre-installed from the factory.PNP (Plug-and-Play) airplanes include the ESC, motor, and servos all pre-installed from the factory. Transmitter, receiver, battery, and charger are not included. Specification Wingspan 2500mm / 98.4 in Overall Length 1390mm / 54.7 in Flying Weight Around 2350g Motor Size 3541 KV750 ESC 40A ESC (with brake function) Servo 17gX4pcs Servo 9gX2pcs Radio 6CH Channel CG (center of gravity) 70-80mm Prop Size 13.5*6，2 blades Recommended Battery 14.8V 2200mAh-2600mAh 35c Battery Connector XT60 Aileron Yes Elevator Yes Rudder Yes Flaps Yes Retracts No Approx. Flying Duration 10minutes Minimum Age Recommendation 14+ Experience Level Intermediate Assembly Time 5minutes Wing Load 45.7g/dm² (0.09oz/in²) Wing Area 50.3 dm² (779.5 sq.in)

USD 279.99

FMS 1:24 FSC24 Chaser Short Course Truck RTR

FSC24 Chaser - 1:24 Short Course Truck The Perfect Short Course Truck for Beginners to Master Speed and Control. Background The Baja 1000, which began in 1967, is one of the most challenging and thrilling off-road events in the world. Short-course trucks, often referred to as light trucks, are typically designed for urban use and short-distance transport, prioritizing efficiency and agility. However, in events like the Dakar Rally, these trucks undergo extensive modifications, including upgrades to their suspension, chassis, specialized tires, and cockpit safety features. These enhancements equip the trucks to navigate harsh terrains such as desert dunes, rocky landscapes, river crossings, and mountains, enabling them to perform exceptionally well under extreme conditions. Introduction The FSC24 Chaser is available in two striking paint schemes, featuring a plastic shell crafted using a blister process and adorned with eye-catching stickers that stand out on any terrain. FMS has developed a new-generation FSC24 chassis, equipped with front independent suspension and a rear straight axle. The frame is constructed from high-strength nylon, providing an ideal balance of lightness and durability. The mid-mounted power unit, with its low center of gravity, incorporates a two-speed transmission and a 370 high-speed brushed motor into a single compact unit. The two-speed transmission is controlled via CH3 on the remote, while metal planetary gear differentials at both axles ensure robust torque delivery for high-speed off-roading, exceptional cornering, and a realistic stance. What's in the box: 1 x 1:24 FSC24 Chaser RTR 1 x 2.4GHz G3 V3 Transmitter 1 x R3B Receiver with ESC Group Control Board (installed) 1 x 370 Brushed Motor (installed) 2 x 13g Metal Servo (installed) 1 x 2S Lipo 7.4V 900mAh 25C with XT30 Connector 1 x USB Charger 1 x Product Manual Need to Complete: 4 x AAA Batteries for Transmitter Specification: Length 236mm Width 143mm Height 107mm Wheelbase 140mm Tire F/R D: 54mm, W: 23mm Minimum Ground Clearance 33mm Approach Angle 63° Departure Angle 53° Motor 370 Brushed Motor Servo 13g Metal Servo x 2 Battery 2S Lipo 7.4V 900mAh 25C with XT30 Connector Remote Control Distance 80m Approx. Operating Duration Time 30mins Remote Control G3 V3+ Transmitter, R3B Receiver with ESC Group Control Board

USD 129.99