24V 2.5A 60W Reliable Railway Enclosed DC-DC Converter 40-160 Vin
Jameco ElectronicsJameco Electronics
3.0

24V 2.5A 60W Reliable Railway Enclosed DC-DC Converter 40-160 Vin

USD 42.60

Description

24V 2.5A 60W Reliable Railway Enclosed DC-DC Converter 40-160 Vin 24 Volts DC @ 2.5 Amps Features Compliance to EN50155 and EN45545-2 railway standard Ultra compact and 1U low profile (25mm) 4:1 wide input range No minimum load required Protections: Short circuit, overload, over voltage, input reverse polarity 4000 VDC I/O isolation Half encapsulated, cooling by free air convection -40 to +70°C wide working temperature Built-in constant current limiting circuit LED indicator for power on Screw terminals 3 year warranty Specifications Output voltage: 24 VDC Output current: 2.5 Amps Rated power: 60 Watts Input voltage range: 40 to 160 VDC Efficiency: 91.5% Line regulation: 0.2% Load regulation: 0.2% Ripple & noise: 50 mVp-p Size: 5.04"L x 2.36"W x 0.98"H Agency approvals: CE Applications Bus, tram, metro or railway systems Highly vibrating, highly dusty, extremely low or high temperature harsh environment Wireless network Telecom or Datacom system Industry control system

Jameco Electronics promo code

You could save on Jameco Electronics 24V 2.5A 60W Reliable Railway Enclosed DC-DC Converter 40-160 Vin with a Jameco Electronics promo code:

    Jameco Electronics logo

    Free Shipping

    51 uses
    low

    worked 7 months ago

    Free Shipping On Storewide (Minimum Order: $60) at Jameco Electronics
View all Jameco Electronics coupons and promo codes

More Jameco Electronics Products

Adafruit 9-Dof Orientation Imu Fusion Breakout - Bno085 (Bno080) - Stemma QT/Qwiic

Adafruit 9-Dof Orientation Imu Fusion Breakout - Bno085 (Bno080) - Stemma QT/Qwiic

Adafruit 9-Dof Orientation Imu Fusion Breakout - Bno085 (Bno080) - Stemma QT / Qwiic Features Product Type: Sensors - Weight HTS Code: 8542.39.00.00 Country of Origin: USA

USD 24.95

8-Pin Gold Plated SOIC Clip Test Clip with 0.1" Lead Spacing

8-Pin Gold Plated SOIC Clip Test Clip with 0.1" Lead Spacing

8-Pin SOIC Clip Test Clip Specially designed for in-circuit testing on Small Outline Integrated Circuits (SOIC and SOJ). The SOIC Clip test clip assures a positive connection to all chip leads and provides hands-free testing. Features: Upper contacts are .025" sq. pins, spaced at .100". Pins are perfect for sq. pin receptacles, wire-wrap or jumper leads Gold plated lower contacts assure reliable, noise free connections Molded barriers between each contact allow connections to be made on live boards without accidental shorting to adjacent chip leads Fits surface mounted SOIC and SOJ chips with gull wing or "J" leads and body width from .150" to .350" wide Larger width: .430"Shorter width: .260"

USD 18.15

UBEC DC/DC Step-Down (Buck) Converter 5V 3A Output

UBEC DC/DC Step-Down (Buck) Converter 5V 3A Output

Your power supply problems are now fixed! This little circuit board may look small but inside is a high-efficiency DC/DC step-down converter that can output up to 3 amps at 5V without the need of any heat-sink or forced cooling. (It will get hot at 3A though). UBEC stands for "universal battery eliminator circuit" and this UBEC is designed to replace a 5V supply in RC planes and 'copters, but it's also great for a variety of microcontrollers or electronics project that runs with 5V. Adafruit has tried a half dozen different UBECs and found this one to be the best in terms of range and stability. You can check the technical tab for the analysis of input/output range and current draw. To use, connect 6V up to 16V (recommended) to the IN-side wires and 5V will be generated on the OUT-side wires. You'll get 5V (±5%) regulated output from higher voltage input. 3A output current, 5A peak - if you're trying to draw 3A you'll need to give it a little more than 6V though, 7V works well. The UBEC has built-in filter capacitors on the input and output, but it's a switching supply so it's a little noisy compared to a linear regulator. There is a label on the clear heat shrink around the circuit board for the UBEC. The IN side (provide 7V-12V) is the open wires and the out (supplies 5V) is the black 3 pin female connector.

USD 9.95

12 Watt 12 VCT 1A 120V AC Power Transformer<br />6V-0V-6V

12 Watt 12 VCT 1A 120V AC Power Transformer<br />6V-0V-6V

12 Watt 12 VCT 1A 120V AC Power Transformer Features Manufacturer: Coast Electronics Supply Manufacture#: 67-1121 Primary Voltage Input: 120 VAC @ 60 Hz, 0.08A Max. Secondary Voltage Output: 12 VCT @ 1A, 6V-0V-6V Power Rating: 12 VA Size: 1.25" L x 2.50" W x 1.38" H Weight: 0.7 lbs. Connection: Terminal Lug (2x primary, 3x secondary) 0.118" lugs

USD 10.95

You May Also Like