Borg Warner S372-SXE (72/73 Supercore) - Powerstroke, Cummins, Duramax
KC TurbosKC Turbos
3.0

Borg Warner S372-SXE (72/73 Supercore) - Powerstroke, Cummins, Duramax

USD 969.65

Description

S372-SXE Supercore Turbo Features & Details: Borg Warner 4" Inlet / 2.5" Outlet Ported Compressor Housing Integrated Speed Port (Sensor Not Included) 72/91mm Billet Compressor Wheel w/ Extended Tips 73/80mm Turbine Wheel 360 degree thrust bearing  Compressor cover integrated speed sensor port and pre-machined boost port Flexible compressor cover outlet options (S300SX-E only) Forged milled (billet) compressor wheels with extended tip technology Optimized compressor stage aerodynamics Interchangeable with existing SX turbine housings Description: Borg Warner Supercore assembly consists of the entire turbocharger minus turbine housing. All SX-E Supercores come with turbine housing mounting hardware, clamp plates, cap screws and mounting gaskets. Speed sensor and turbine outlet V-band are not included. Choose a turbine housing from Borg Warner factory housings as well as AGP custom cast performance housings. Borg Warner 4" Inlet 2.5" outlet compressor housing with port shroud map width enhancement, pre tapped for speed sensor and pressure port. The bearing housings are not water-cooled and have a 1/4"NPT oil inlet. The oil drain is the standard T3-T4.

Get a deal on Borg Warner S372-SXE (72/73 Supercore) - Powerstroke, Cummins, Duramax

You could save on KC Turbos Borg Warner S372-SXE (72/73 Supercore) - Powerstroke, Cummins, Duramax with a KC Turbos promo code:

    KC Turbos logo

    5% off

    391 uses
    low

    worked over 1 year ago

    5% Off Select Items at KC Turbos
View all KC Turbos coupons and promo codes

More KC Turbos Products

KC Intercooler Pipe Kit - 6.0 Powerstroke (2003-2007)

KC Intercooler Pipe Kit - 6.0 Powerstroke (2003-2007)

Intercooler Pipe Kit Features & Details: Available in Raw, Black, Gold, Red, Green, and Blue Powder Coat Finish Powder Coating can take up to 3 weeks to ship Optional Riff Raff replacement silicone boots and T-bolt clamps Aluminum construction Mandrel Bent 2003 will need to remove throttle body Description: Replace your prone to crack OEM piping with the KC Intercooler Pipe Kit. This kit increases air flow to help increase power and lower EGT's. Plus gives a custom look under your hood.

USD 200.00

No Limit ColdSide Kit - 6.0 Powerstroke (2003-2007)

No Limit ColdSide Kit - 6.0 Powerstroke (2003-2007)

No Limit ColdSide Kit Features & Details:  2 Silicone boots 4 Stainless clamps Manifold flange 0-ring  High grade aluminum Description: This intake elbow and CAC pipe is the longest radius from the intake manifold on the market. Made from high grade thick wall aluminum, you will see increased throttle response and slightly lower EGT's in the 30 to 50 degrees range of drop. This kit connects your intercooler cold side to your intake manifold. Made in the USA.

USD 350.00

Kill Devil Diesel O-Ringed Cylinder Heads - 6.0 Powerstroke (2003-2007)

Kill Devil Diesel O-Ringed Cylinder Heads - 6.0 Powerstroke (2003-2007)

KDD O-Ringed Cylinder Heads Features & Details: Track tested, proprietary O-Ring setup. 32 Tungsten Carbide hardened valve seat inserts to prevent cracking. 32 press in iron matrix valve guides, honed to size for superior lubrication retention and ultimate longevity. Upgraded heavy duty casting, thicker than OE. Pressure tested and vacuum checked. Blueprinted to proprietary valvetrain geometry, to alter valve height and valve recession for maximum reliability and longevity. New USA made high quality valve springs, retainers, locks, valve stem seals, freeze plugs, glow plug sleeves and injector sleeves. Valve spring pressure is tested and balanced ensure consistent spring pressure across all valves The same industry leading O-ring design survived Diesel Power Magazine’s DPC torture test, claiming victory in 2016 and 2017. Order comes as a set (2 heads) Description: KDD O-ring heads start off with a 100% brand new heavy duty casting made just for us, to our exacting specifications.  Several key design flaws with the factory cylinder heads - KDD castings incorporate a higher nickel content and thicker deck surface, for a more rigid casting, and hardened alloy valve seat inserts (to prevent cracking of the valve seats like the factory heads are notorious for).  Our 6.0 heads have more material around the injector bores, and reinforced injector bolt holes to eliminate cracking in the injector bore.  We receive our castings bare, then perform all finish machine work in house, including our proprietary O-ring design.  O-ringing the heads virtually eliminates the head gasket issues these engines were plagued with from the factory. A receiver groove is machined into the deck surface of the heads and our USA made stainless wire is pressed into the groove - the wire protrudes from the groove applying extra pressure to all layers of the MLS gaskets - sealing combustion pressure in the cylinder. The high carbon stainless wire we use won’t compress or deform over time and is reusable should you have the heads off of the engine for any reason in the future.  KDD O-ringed heads work with any standard “off the shelf” head gaskets, and don’t require any special machining of the block - just prep the deck surface ensuring the block is clean, dry, and flat.  The iron matrix valve guides are diamond honed to size leaving a smooth cross-hatch finish in the valve guide similar to the cylinder bore, which provides superior oiling and wear resistance in the demanding diesel application.  We then hand assemble the heads with our new USA made valves and springs to our proprietary blueprint-specifications, eliminating sloppy factory tolerances and correcting the poor valvetrain/lifter geometry.  We use a quality bonded style valve stem seal so they don’t blow the seals apart like the factory crimped seals do. No Core is required. The heads come ready to install, with a 12-month replacement warranty against defects in quality and workmanship. **Heads DO NOT come with head gaskets.  We recommend OEM, Fel Pro, and Black Diamond. DO NOT USE BLACK ONYX** **No core charge or return shipping as cylinder heads are 100% new** -----There is a 3-4 week lead time on all KDD heads. ------

USD 2499.00

KDD Cam Complete Upgrade Kit - 6.0/6.4 Powerstroke (2003-2010)

KDD Cam Complete Upgrade Kit - 6.0/6.4 Powerstroke (2003-2010)

KDD Complete Cam Kit Features & Details: 8-10 weeks lead time Billet Stage 1 or 2 Cam New OEM Lifters New OEM Lifter Guides ARP Crank Hub Bolts Description:  All cams and lifters have been tested for quality control before shipping out. You can select a Stage 1 KDD cam or a Stage 2 KDD cam.  Stage 1 - Stock Plus - Ideal for factory replacement, heavy towing applications, maximizes efficiency from Idle-3500 RPM, from stock to 190 cc injectors, stock turbo up to stage 2 VGT turbo. Stage 2 - Street Performance - Ideal for the  modified street truck looking to maximize efficiency from 1600-4000 RPM, perfect for stock to 330cc injectors, hands down our most versatile camshaft.  Works well for towing but really shines on hot street trucks from 2k-4k rpm. Proven itself in daily driven applications to 1000+ hp street/strip applications.     **Adding the 6.4 pushrods to a 6.0 is recommend for higher performance**

USD 1298.65

You May Also Like

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case Gongfu Teamaking goes back over 1000 years, originating in Chaozhou in Guangdong Province, China.   With a little practice, this technique of making tea in a lidded cup and filtering into a pitcher not only greatly improves the quality of the tea experience, but also can be a surprisingly relaxing and meditative hobby.    This set contains everything you need to get started, both for making tea yourself, and for friends. @yourteaguy SAmPLeS ArE HErE 🍵💥🍵 ##jessesteahouse ##tea ##teatok ##gongfutea ##teatime ##asian ##chinese ##culture ##exchange ##relax ##hobby ##茶 ##功夫茶 ♬ Lofi - Domknowz What's In The Case?   This set includes everything you need to make gongfu tea, including: 1) Tea Tray  Gongfu-style tea tray with slats that collects water and tea underneath for easy cleaning and disposal. It holds your tea equipment and gives your tea pets a place to live!   Clean and stylish, the top is made of sustainable bamboo; the bottom is made of white plastic.   2) Full 15-Piece Tea Set - A complete white ceramic tea set including: 1 Gaiwan (lidded cup) for brewing tea, gaiwan lid, and gaiwan saucer; 1 Ceramic filter with metal mesh, and ceramic filter-holder; 6 Tea cups, for serving many guests or for extras if you drop one! 1 Glass pitcher for holding the brewed tea; 1 Tea towel; 1 Set of wooden tongs. The gaiwan is 120 ml in size, which is perfect for brewing for 1-4 people.   3) FREE Tea Pet!   Tea pets are part of the Gongfu Tea tradition! They are small clay animals that live on the tea table and bring luck and auspiciousness. You "raise" your tea pets by pouring tea on them over the months and years.   Each set comes with a free random tea pet!  Bring Gongfu Tea Anywhere! The set comes in a beautiful carrying case, which is full of foam padding so as to protect your tea equipment even when you travel.    I film lots of videos around the country making tea, and I bring this travel set with me everywhere. It fits in a backpack for longer journeys, and it has a handle for toting to a friend's house. @yourteaguy Home away from home ##tea ##teatok ##jessesteahouse ##gongfutea ##gongfucha ##teaorange ##travel ##teatable ##airplane ##chinese ##asian ##culture ♬ Lofi - Domknowz Tea Table + Tea Sampler Combo Discount!   If you're just getting started, you'll need some teas as well!   My Gongfu Tea Sampler pack comes with eight(!) awesome teas and is a mini-tea collection in a box -- check out the sampler's product page! To get 25% off the tea sampler by buying it alongside the tea set, go to the top of the page and select the combo option from drop-down menu next to the product name. Jesse's Quality Guarantee！ When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 85.00

Jesse's Teahouse
Jesse's Teahouse