MAXTRAX Static Rope Extension - 10m
MaxtraxMaxtrax
4.0

MAXTRAX Static Rope Extension - 10m

AUD 135.00

Description

The MAXTRAX STATIC ROPE EXTENSION 10 is designed to be a static element during a vehicle recovery. The MAXTRAX STATIC ROPE EXTENSION 10 can be used as an extension strap for a tow recovery, joined together with MAXTRAX KINETC ROPE(S) or joined with a WINCH ROPE to extend the total length of ropes. The MAXTRAX STATIC ROPE EXTENSION 10 has been designed and tested as part of the MAXTRAX RECOVERY SYSTEM. The MAXTRAX RECOVERY SYSTEM is comprised solely of MAXTRAX products and has not been tested with any third-party-branded products. Critically, if the MAXTRAX RECOVERY SYSTEM is overloaded the MAXTRAX FUSE SHACKLE is designed to be the weakest link, and the expected point of failure. Accordingly, YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM during any vehicle recovery. Only use rated recovery points when connecting the MAXTRAX FUSE SHACKLE or MAXTRAX CORE SHACKLE to a vehicle. Before using the MAXTRAX STATIC ROPE EXTENSION 10 for a vehicle recovery, ensure that any person involved reads and understands ALL THE INFORMATION ON THIS packaging, and on any warning labels attached to the MAXTRAX STATIC ROPE EXTENSION 10. 1. Visually inspect the MAXTRAX STATIC ROPE EXTENSION 10 to ensure it is undamaged and in a safe and usable condition prior to installation, as well as prior to use. 2. Attach the MAXTRAX STATIC ROPE EXTENSION 10, to the MAXTRAX HITCH, other MAXTRAX KINETIC ROPE, MAXTRAX STATIC ROPE or the vehicles rated recovery points using a MAXTRAX CORE SHACKLE or MAXTRAX Fuse Shackle. 3. MAXTRAX STATIC ROPES can be used individually or connected using MAXTRAX CORE SHACKLES to make a rope the required length for your particular vehicle recovery scenario. 4. Place the MAXTRAX RECOVERY DAMPENER over the MAXTRAX KINETIC ROPE or MAXTRAX WINCH ROPE and attach to loop or Shackle. 5. Using MAXTRAX 4WD RECOVERY TRACKS to provide a ramp will greatly reduce the forces and loads on all equipment during the recovery. 6. Clear the area of bystanders and spectators. 7. Commence the recovery by GENTLY taking up the slack in the system. 8. If the recovery is initially unsuccessful, try again with SLIGHTLY more momentum. Materials: Ultra-High-Molecular-Weight Polyethylene and Polyester Weight: 0.98 kg Length: 11mm x 10m MBS: 11000 kg/24250 lb CARE & MAINTENANCE The various components of the MAXTRAX RECOVERY SYSTEM are of high quality, but due to the very nature of their potential use, or misuse, they are susceptible to severe wear and tear, and to damage such as nicks, cuts, tears, fraying, burns and abrasion. Always carefully inspect MAXTRAX RECOVERY SYSTEM components before each use for wear and tear, cuts, nicks, abraded, burned, melted and frayed areas. DO NOT USE the product if it is damaged, cut, frayed, burned, melted, abraded or partially unwound OR does not have a clearly legible warning label fitted. To help prolong the life of your MAXTRAX RECOVERY SYSTEM components, they should be washed off, rinsed with clean fresh water and air dried at the earliest opportunity after use. To protect from external environmental weather factors, components should be stored inside the MAXTRAX RECOVERY KIT BAG. Replacement protective sheaths are available from our website. SAFETY RECOMMENDATIONS It is recommended that the minimum breaking strength of the strap should be between 2 and 3 times the gross vehicle mass (GVM) of any vehicle it is used with. It is advised that the strap must be suited to the gross vehicle mass (GVM) of the lighter of the 2 vehicles used in the recovery process. SAFETY INSTRUCTIONS Use only MAXTRAX Recovery products in the MAXTRAX RECOVERY SYSTEM. YOU MUST USE a MAXTRAX FUSE SHACKLE in the MAXTRAX RECOVERY SYSTEM at all times in each vehicle recovery. a) Persons intending to use the strap should consider completing a nationally recognised four-wheel drive training course, or contact a four-wheel drive club for comprehensive advice on the proper selection and use of the strap b) the strap must not be used for lifting or conventional towing c) the persons intending to use the strap must ensure the strap is not damaged and is in a usable condition d) the straps strength and stretch are reduced when the strap is saturated with water e) an object such as a recovery damper, heavy bag or blanket must be draped over the strap during use to reduce any unintentional rebound of the strap f) before attempting the vehicle recovery, passengers of the vehicles involved must: (i) exit the vehicles (ii) stand as far away from the vehicles as possible (iii) avoid standing in the path of the vehicle performing the recovery

Get a promo code on MAXTRAX Static Rope Extension - 10m

You could save on Maxtrax MAXTRAX Static Rope Extension - 10m with a Maxtrax promo code:

    Maxtrax logo

    10% off

    344 uses
    high

    worked 29 days ago

    10% Off Select Items (minimum Order $50) at Maxtrax
View all Maxtrax coupons and promo codes

More Maxtrax Products

MAXTRAX LITE Black

MAXTRAX LITE Black

The MAXTRAX LITE recovery tracks carry the same MAXTRAX DNA that defines our premium tracks, but in a new lightweight construction! Features: Half the weight. All the adventure: 1.8kg each, 48% lighter than Mk2’s. Footprint: 895mm long for traction. Premium Australian Manufacturing: Proudly Australian Made. Lifetime Wa

AUD 179.00

MAXTRAX Universal Flat Rack Mounting Kit

MAXTRAX Universal Flat Rack Mounting Kit

The MAXTRAX Universal Flat Rack Mounting Kit is designed to mount your MAXTRAX Recovery Boards to your vehicle's roof platform or roof rack crossbars and is commonly used for securing to vehicle canopies and caravans/camper trailers. The MAXTRAX Universal Flat Rack Mount can securely attach up to 4 x MAXTRAX MKII recovery boards, 4 x MAXTRAX LITE recovery boards (MK2/LITE Mounting pins), 4 x MAXTRAX XTREME recovery boards (Xtreme Mounting Pins), or a pair of each (Hybrid mounting pins). The MAXTRAX Universal Flat Rack Mount provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks. The MAXTRAX Universal Flat Rack Mount Includes 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands), Spring Washers, Flat Washers & Nyloc Nuts, 4 x Steel Bolts with 4 x Channel Nuts. NOTE: The Frontrunner Slimline & Slimsport roof platform will require M8 bolts. Other roof rack brands may require additional mounting hardware (available from market leading roof rack retailers) to support fitment to the ARB Base Rack. The new Rhino Rack P6 range will require the RR Zwifloc fastening hardware. The package includes the following components: 2 x  Glass filled Nylon Flat brackets featuring MAXTRAX logo 4 x Channel Nuts, Stainless Steel flat washers, spring washers and Bolts; (Channel Nuts: 40mm x 20mm x 10mm) 1 x Set MAXTRAX Mounting Pins 17mm (Mk2 /LITE - MTXMPS17, Hybrid - MTXMPSX17, XTREME - MTXXMPS17) 4 x Stainless Steel M8 T-Bolts, flat washers and Nyloc nuts; (T-Bolt: 35mm x 20mm x 4.5mm, M8 x 20mm) 4 x Stainless Steel M8 Bolts Warranty: 12 month warranty against faulty materials and workmanship.

AUD 129.00

MAXTRAX XTREME Stealth Black

MAXTRAX XTREME Stealth Black

MAXTRAX XTREME - the world's best 4WD recovery tracks just got better! Multi-award-winning MAXTRAX XTREME is the most advanced 4WD recovery track ever created, featuring 88 replaceable hard-anodised alloy teeth moulded into a heavy-duty, super-tough, engineering-grade reinforced Nylon recovery track. MAXTRAX XTREME is designed and manufactured for professional use based on direct feedback from some of the world's most elite military units, off-road racing champions, certified 4WD driver trainers and globe-trotting expedition leaders as a mission-critical recovery track for a wide range of scenarios where time is of the essence and aggressive driving and excessive wheel spin is often unavoidable, including active combat situations, timed motorsport competitions and remote area expeditions. MAXTRAX XTREME is manufactured in Australia using our secret recipe; a heavy-duty, super-tough, engineering-grade reinforced Nylon; the same amazing material that weve made MAXTRAX MKII from for almost a decade. The manufacturing process involves a custom jig attached to a robot arm inserting the 88 alloy teeth in the correct orientation into special sockets in the injection mould, then over-moulding them into the body of the track, ensuring that the Nylon material conforms closely to the thread of each tooth for a super secure fit, virtually eliminating the risk of a tooth unwinding from the body of the track. All 88 alloy teeth are hard-anodised to protect against corrosion in harsh, salt water or muddy environments. As the alloy is significantly harder and more durable than the rubber compound found in tyres and also more resistant to wear from a spinning tyre than any polymer available today, you can expect faster, more secure engagement with the tyre's tread pattern, which not only makes MAXTRAX XTREME the most-durable recovery track on the market, but also the fastest. The carton includes 2 MAXTRAX and 2 orange telltale leashes (so you can find your MAXTRAX when they're buried). MAXTRAX XTREME is also easily repairable in the field. If a tooth gets damaged, simply flip the board over and use a T-50 Torx bit to remove and replace the damaged tooth. MAXTRAX XTREME uses a proprietary and patent-pending thread & bliplock system to ensure secure physical engagement of a new tooth with its recess after replacement. Replacement teeth and a custom T-head tool which also works with our mounting pins are available for purchase here. MAXTRAX XTREME will nest with MAXTRAX MK2 recovery tracks, (although there is a slightly larger space between the tracks due to the design of the underside of the MAXTRAX XTREME). Mounting pins designed exclusively for the MAXTRAX XTREME are available, including a hybrid mounting pin designed for those adding a set of MAXTRAX XTREME to the top of their current MKII recovery tracks. MAXTRAX XTREME is also compatible with MAXTRAX mini and our fixing and linking kit to create a portable roadway. Australian designed, engineered and manufactured 88 replaceable anodised alloy teeth; designed for XTREME users Safe and easy recovery from sand, mud, snow and slush Made from super tough engineering grade reinforced Nylon Compatible with MAXTRAX MKII and MAXTRAX mini Proven, patent-pending, multi-award-winning design Weight: 9kg/20lbs per pair Six glove-friendly handles Lifetime warranty A variety of mounting and carrying options are available Colour: Stealth Black Please note: Actual colour may vary slightly from images shown. Warranty: We back our confidence in this quality Australian Made product with a lifetime warranty against faulty materials and workmanship (terms and conditions apply, see MAXTRAX Warranty) Shipping: Please provide a physical address as we CANNOT ship to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).

AUD 519.00

MAXTRAX Mounting Pin Set - MKII

MAXTRAX Mounting Pin Set - MKII

Designed to secure 2 or 4 (1 or 2 pairs) of MAXTRAX MKII 4WD Recovery Tracks. Choose from either the 40mm or 17mm thread depending on your setup. Glass-filled Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack, mount, or crossbars. The set includes 4 pins to securely hold 2 or 4 MAXTRAX MKII 4WD Recovery Tracks, 4 stainless steel Nyloc nuts, and 4 flat stainless steel washers. There's a hole in the top of each mounting pin to fit a small padlock. * Designed specifically for MAXTRAX MKII 4WD Recovery Tracks (NOT INCLUDED). Click here for mounting instructions 40mm Pins Weight: 100 grams each. Size: 140mm long including 40mm of 10mm diameter thread. SS Nylock nuts & flat washers are included. 17mm Pins These pins are produced with 17mm of M10 thread to suit applications where 40mm is too long. 17mm is also the perfect length to suit our MAXTRAX Flat Rack Mount Weight: 100 grams each. Size: 117mm long including 17mm of 10mm diameter thread. SS Nylock nuts & flat washers are included. Warranty: 12 month warranty against faulty materials and workmanship. Shipping: We CAN ship this product to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email of the total cost of your order including shipping (International shipping is NOT free).

AUD 54.99

You May Also Like