Ezy Anchor Premium Caravan Starter Pack - With Carry Bag

Name: Ezy Anchor Premium Caravan Starter Pack - With Carry Bag
Brand: Maxtrax
Price: 189 AUD
Availability: InStock

AUD 189.00

Description

Now packed with even more value for Caravaners! The Premium Caravan Starter Pack is designed for Caravaners for use in the hard red and gravelly dirt of the Outback and also sandy loam soils, and includes the Premium Ezy Anchor Storage Bag. Premium Package Includes: 8 x Ezy Anchors 4 x Coastal pegs at 280mm long 4 x Outback pegs at 200mm long 1 x Torx T50 Driver 1x Torx T50 Manual removal L key 2 x Caravan Double Guy Ropes with Velcro straps, stainless clips, trace springs, cleats and reflective double braided polyester rope 1 x Ezy Anchor Premium Storage bag - see full product specs here: https://ezyanchor.com/products/premium-storage-bag These packs have been determined by months of personal use and testing in both types of the areas detailed above and also research throughout Central and Outback Australia. We thank you for your purchase and wish you many years of happy use of your Ezy Anchors! **Ezy Anchor supports Australian Business and Jobs** *We cannot accept responsibility for damage and injuries caused by misuse. Installation: Take your cordless drill or impact driver Connect the Torx driver bit to the drill/driver and secure in the chuck Pick up your Ezy Anchor with screw in position through the Ezy Anchor Connect your guy rope to the hook Hold the guy rope and hook together with your guiding hand Pick up the drill and driver in your driving hand Insert the Torx driver into the head of the screw Place drill in forward drilling position Commence drilling the screw downward into the earth keeping the EzyAnchor parallel to the earth so the screw penetrates at its set angle. Installation complete Should you strike a solid object whilst installing the screw, remove and reposition the screw to another position close to or adjacent to the original required position. Removal: With your drill in hand and Torx driver bit connected and secured within your drill chuck connect the Torx bit driver to the screw head. Hold the hook and guy rope in one hand, place drill in reverse and screw out. Removal complete *In the event of a flat battery you can connect a shifting spanner to the driver bit shaft and unscrew manually to a point where you can remove the screw from the ground. **Remember to regularly charge your drill or impact driver battery.

Try this code on Ezy Anchor Premium Caravan Starter Pack - With Carry Bag

You could save on Maxtrax Ezy Anchor Premium Caravan Starter Pack - With Carry Bag with a Maxtrax promo code:

10% off

344 uses

high

worked 29 days ago

10% Off Select Items (minimum Order $50) at Maxtrax

View all Maxtrax coupons and promo codes

More Maxtrax Products

MAXTRAX LITE Black

The MAXTRAX LITE recovery tracks carry the same MAXTRAX DNA that defines our premium tracks, but in a new lightweight construction! Features: Half the weight. All the adventure: 1.8kg each, 48% lighter than Mk2’s. Footprint: 895mm long for traction. Premium Australian Manufacturing: Proudly Australian Made. Lifetime Wa

AUD 179.00

MAXTRAX Universal Flat Rack Mounting Kit

The MAXTRAX Universal Flat Rack Mounting Kit is designed to mount your MAXTRAX Recovery Boards to your vehicle's roof platform or roof rack crossbars and is commonly used for securing to vehicle canopies and caravans/camper trailers. The MAXTRAX Universal Flat Rack Mount can securely attach up to 4 x MAXTRAX MKII recovery boards, 4 x MAXTRAX LITE recovery boards (MK2/LITE Mounting pins), 4 x MAXTRAX XTREME recovery boards (Xtreme Mounting Pins), or a pair of each (Hybrid mounting pins). The MAXTRAX Universal Flat Rack Mount provides 180mm of closer adjustment or 180mm of further apart adjustment from the mounting point of the Flat Racks. The MAXTRAX Universal Flat Rack Mount Includes 4 x T-Bolts (Suitable for Rola Titan roof platform, roof platforms and roof rack crossbars from most popular Roof Rack Brands), Spring Washers, Flat Washers & Nyloc Nuts, 4 x Steel Bolts with 4 x Channel Nuts. NOTE: The Frontrunner Slimline & Slimsport roof platform will require M8 bolts. Other roof rack brands may require additional mounting hardware (available from market leading roof rack retailers) to support fitment to the ARB Base Rack. The new Rhino Rack P6 range will require the RR Zwifloc fastening hardware. The package includes the following components: 2 x Glass filled Nylon Flat brackets featuring MAXTRAX logo 4 x Channel Nuts, Stainless Steel flat washers, spring washers and Bolts; (Channel Nuts: 40mm x 20mm x 10mm) 1 x Set MAXTRAX Mounting Pins 17mm (Mk2 /LITE - MTXMPS17, Hybrid - MTXMPSX17, XTREME - MTXXMPS17) 4 x Stainless Steel M8 T-Bolts, flat washers and Nyloc nuts; (T-Bolt: 35mm x 20mm x 4.5mm, M8 x 20mm) 4 x Stainless Steel M8 Bolts Warranty: 12 month warranty against faulty materials and workmanship.

AUD 129.00

MAXTRAX XTREME Stealth Black

MAXTRAX XTREME - the world's best 4WD recovery tracks just got better! Multi-award-winning MAXTRAX XTREME is the most advanced 4WD recovery track ever created, featuring 88 replaceable hard-anodised alloy teeth moulded into a heavy-duty, super-tough, engineering-grade reinforced Nylon recovery track. MAXTRAX XTREME is designed and manufactured for professional use based on direct feedback from some of the world's most elite military units, off-road racing champions, certified 4WD driver trainers and globe-trotting expedition leaders as a mission-critical recovery track for a wide range of scenarios where time is of the essence and aggressive driving and excessive wheel spin is often unavoidable, including active combat situations, timed motorsport competitions and remote area expeditions. MAXTRAX XTREME is manufactured in Australia using our secret recipe; a heavy-duty, super-tough, engineering-grade reinforced Nylon; the same amazing material that weve made MAXTRAX MKII from for almost a decade. The manufacturing process involves a custom jig attached to a robot arm inserting the 88 alloy teeth in the correct orientation into special sockets in the injection mould, then over-moulding them into the body of the track, ensuring that the Nylon material conforms closely to the thread of each tooth for a super secure fit, virtually eliminating the risk of a tooth unwinding from the body of the track. All 88 alloy teeth are hard-anodised to protect against corrosion in harsh, salt water or muddy environments. As the alloy is significantly harder and more durable than the rubber compound found in tyres and also more resistant to wear from a spinning tyre than any polymer available today, you can expect faster, more secure engagement with the tyre's tread pattern, which not only makes MAXTRAX XTREME the most-durable recovery track on the market, but also the fastest. The carton includes 2 MAXTRAX and 2 orange telltale leashes (so you can find your MAXTRAX when they're buried). MAXTRAX XTREME is also easily repairable in the field. If a tooth gets damaged, simply flip the board over and use a T-50 Torx bit to remove and replace the damaged tooth. MAXTRAX XTREME uses a proprietary and patent-pending thread & bliplock system to ensure secure physical engagement of a new tooth with its recess after replacement. Replacement teeth and a custom T-head tool which also works with our mounting pins are available for purchase here. MAXTRAX XTREME will nest with MAXTRAX MK2 recovery tracks, (although there is a slightly larger space between the tracks due to the design of the underside of the MAXTRAX XTREME). Mounting pins designed exclusively for the MAXTRAX XTREME are available, including a hybrid mounting pin designed for those adding a set of MAXTRAX XTREME to the top of their current MKII recovery tracks. MAXTRAX XTREME is also compatible with MAXTRAX mini and our fixing and linking kit to create a portable roadway. Australian designed, engineered and manufactured 88 replaceable anodised alloy teeth; designed for XTREME users Safe and easy recovery from sand, mud, snow and slush Made from super tough engineering grade reinforced Nylon Compatible with MAXTRAX MKII and MAXTRAX mini Proven, patent-pending, multi-award-winning design Weight: 9kg/20lbs per pair Six glove-friendly handles Lifetime warranty A variety of mounting and carrying options are available Colour: Stealth Black Please note: Actual colour may vary slightly from images shown. Warranty: We back our confidence in this quality Australian Made product with a lifetime warranty against faulty materials and workmanship (terms and conditions apply, see MAXTRAX Warranty) Shipping: Please provide a physical address as we CANNOT ship to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email the total cost of your order including shipping (International shipping is NOT free).

AUD 519.00

MAXTRAX Mounting Pin Set - MKII

Designed to secure 2 or 4 (1 or 2 pairs) of MAXTRAX MKII 4WD Recovery Tracks. Choose from either the 40mm or 17mm thread depending on your setup. Glass-filled Nylon and stainless steel quick-release pins for securely mounting your MAXTRAX on a roof rack, mount, or crossbars. The set includes 4 pins to securely hold 2 or 4 MAXTRAX MKII 4WD Recovery Tracks, 4 stainless steel Nyloc nuts, and 4 flat stainless steel washers. There's a hole in the top of each mounting pin to fit a small padlock. * Designed specifically for MAXTRAX MKII 4WD Recovery Tracks (NOT INCLUDED). Click here for mounting instructions 40mm Pins Weight: 100 grams each. Size: 140mm long including 40mm of 10mm diameter thread. SS Nylock nuts & flat washers are included. 17mm Pins These pins are produced with 17mm of M10 thread to suit applications where 40mm is too long. 17mm is also the perfect length to suit our MAXTRAX Flat Rack Mount Weight: 100 grams each. Size: 117mm long including 17mm of 10mm diameter thread. SS Nylock nuts & flat washers are included. Warranty: 12 month warranty against faulty materials and workmanship. Shipping: We CAN ship this product to Post Office Boxes. Australian orders: Shipping cost is automatically calculated when ordering. International orders: Shipping cost is manually calculated once your order is received. You will be advised by email of the total cost of your order including shipping (International shipping is NOT free).

AUD 54.99