2006-2013 Lexus IS250/IS350/ISF - 800W RMS 10" Loaded Subwoofer Enclosure | NVX BE-LEX-IS0613-VCW104
NVXNVX
3.0

2006-2013 Lexus IS250/IS350/ISF - 800W RMS 10" Loaded Subwoofer Enclosure | NVX BE-LEX-IS0613-VCW104

USD 588.22

Description

Product Details: Custom-fit 10" Sealed Enclosure for 2006-2013 Lexus IS 250/350/F vehicles* Installs in the storage cubby on the driver's side of the trunk and sacrifices very little space Power Handling: 600-750 watts Preloaded with 10" VCW 104 V2 Series Subwoofer Final Impedance: 2 ohms Enclosure constructed of hand-laid fiberglass Carpeted to match the interior Includes mounting hardware and installation instructions 1-year Warranty from the Original Purchase Date *Warning: Does Not Work with Convertible Models

Try this code on 2006-2013 Lexus IS250/IS350/ISF - 800W RMS 10" Loaded Subwoofer Enclosure | NVX BE-LEX-IS0613-VCW104

You could save on NVX 2006-2013 Lexus IS250/IS350/ISF - 800W RMS 10" Loaded Subwoofer Enclosure | NVX BE-LEX-IS0613-VCW104 with a NVX promo code:

    NVX logo

    10% off

    29 uses
    high

    worked about 1 month ago

    10% Off (Storewide) at NVX
View all NVX coupons and promo codes

More NVX Products

2017-2021 Honda Civic Sport Bass Package - Includes 10" 350W RMS Subwoofer, Custom Enclosure, Monoblock Amplifier, Line Out Converter and Complete Wiring Kit (PBK-HON-CVCHB-G10)

2017-2021 Honda Civic Sport Bass Package - Includes 10" 350W RMS Subwoofer, Custom Enclosure, Monoblock Amplifier, Line Out Converter and Complete Wiring Kit (PBK-HON-CVCHB-G10)

BE-HON-CVCHB-G10 BOOST Box Product Details: B.O.O.S.T. Custom designed bass enclosure for 2017-2021 Honda Civc Sport (ONLY) Hatchback Custom Hand-laid sealed fiberglass enclosure Installs quickly and easily in the right side of the trunk Loaded with one 10" SMW10D4 Subwoofer Power Handling: RMS: 350 Watts Peak: 700 Watts Wired Impedance: 2-Ohm Carbon Fiber Reinforced Polypropylene Cone Butyl Rubber Surround 2" high temperature aluminum voice coil 50oz Y30 High Energy Ferrite Magnet with protective rubber boot Frequency response: 25-350 Hz Sensitivity: 88 dB Add bass, no loss of space Available in loaded and fully amplified package Matches OEM carpet and look Custom design without custom price 1-year Warranty from the Original Purchase Date VADM1 Product Details: Marine Certified 1-Channel Class D Car Amplifier Peak Power Rating: 1000 Watts RMS Power Rating: 4 ohm: 180 watts x 1 channel 2 ohm: 320 watts x 1 channel 1 ohm: 500 watts x 1 channel Cutting edge Micro Class D technology allows amplifier to be extremely compact LED power (blue) and protect (red) indicators Conformal Coated Marine grade circuit board Balanced Differential Inputs, to eliminate noise picked up by signal cables Speaker-level (high-level) inputs 3-way protection circuitry (thermal, overload, and speaker short protection) Input sensitivity: 0.2V-5V Variable low-pass filter (50-250 Hz) Bass Boost: 0 - +18dB boost @ 45Hz Frequency Range : 20 - 20KHz Total Harmonic Distortion: <0.3% CEA-2006 compliant amplifier Dimensions: 6.8"L x 3.3"W x 1.5"H 1-year Warranty from the Original Purchase Date XKIT82 Product Details: 8 Gauge 2-Channel X-Series Complete Amplifier Installation Kit Designed for car audio systems up to 800 watts RMS Made from 100% (OFC) Oxygen-Free Copper for pure uninterrupted power and current transfer Tinned conductors for corrosion resistance Pre-installed black nylon mesh covering protects power wire from being damaged Solid Brass and Satin Chromed ANL/Mini-ANL Fuse holder offers ideal protection for high powered systems Pre-terminated seamless power and ground ring terminals provide reliable performance Full Spec cables meet or exceed the American Wire Gauge standards Strand Count: 735 CEA-2015 and BC5W2 Compliant 1-year Warranty from the Original Purchase Date XLCA2X PRO Product Details: Active 2-channel line output converter and line driver Designed to work with factory and aftermarket audio systems Speaker-level inputs handle up to 30V (225 watts RMS) Low-level RCA inputs handle 150 mV - 2 Volts RCA outputs Provides up to 9.5 Volts of output Adjustable xBOOST corrects for bass roll-off Auto turn-on via DC offset or Audio detection Load selection switch (20, 60, or 20K ohm) to prevent factory stereo shut-down 12 Volt turn-on output for aftermarket amplifiers Selectable Ground Isolation switch to eliminate ground and alternator noise Molex terminals for speaker signal and power Wired remote bass level control included LED Clip indicator Total Harmonic Distortion: 0.001% Signal to Noise: >105 dB Frequency Response: 10-25,000 Hz 1-year Warranty from the Original Purchase Date

USD 646.96

XSP69KIT 600W Peak (300W RMS) 6"x9" X-Series 2-Way Component Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters

XSP69KIT 600W Peak (300W RMS) 6"x9" X-Series 2-Way Component Speakers with Carbon Fiber Cones and 25mm Silk Dome Tweeters

Product Details: 6" x 9" X Series 2-way Component System Car Speakers Power Handling: Peak: 600 watts per set / 300 watts each side RMS: 300 watts per set / 150 watts each side Carbon Fiber cone material Rubber speaker surround 1" Silk Dome Tweeters CEA-2031 compliant: Yes 1-3/16" Voice coil Ferrite magnet motor structure Top-mount Depth: 3" Cutout Dimensions: 5.6" x 8.6" Impedance: 4 ohms Frequency Response: 45 - 21000 Hz Sensitivity: 96 dB 1-year Warranty from the Original Purchase Date Priced Per Complete Component System: 2 midwoofers, 2 tweeters and 2 crossover networks. X-Series owner’s manual

USD 199.99

XCW151 4000 Watt Peak (2000W RMS) 15" X-Series Dual 1-Ohm SPL Subwoofer

XCW151 4000 Watt Peak (2000W RMS) 15" X-Series Dual 1-Ohm SPL Subwoofer

Product Details: 15" Dual 1 ohms X Series SPL Subwoofer Power Handling: Peak: 4000 watts RMS: 2000 watts Designed for Extremely Low Bass 30 mm Xmax (One Way) Enhanced Woven Fiber Paper Composite Cone Custom High-Roll Foam Surround with Black Nylon Stitching Precision-Engineered Custom Tooled Die-Cast Aluminum Basket with Reinforced X Bracing for Structural Strength Vent Cooling Spacer to Maintain Optimal Airflow and Keep the Voice Coil Cool 3.0" High Temperature Flat Wire CCAW Aluminum Voice coil with Black Aluminum Former 4-Layer Linear Roll Spider with Integrated Tinsel Leads for Enhanced Linearity and Durability Optimized High-Velocity Pole Vent One-piece T-yoke with Vented Magnet Gap for Efficient Heat Dissipation 409 oz. Triple Stacked Ferrite Magnet with Protective Rubber Boot Heavy-Duty 4-Gauge Hex Key Speaker Terminals Frequency Response: 20 - 200 Hz Resonance Frequency (Fs): 34.0 Hz Sensitivity: 87.3 dB Recommended ported box volume: 4.25 cubic feet Top-mount depth: 11.41" Cutout diameter: 13.81" CTA-2031 Compliant 1-year Warranty from the Original Purchase Date

USD 639.99

XCW121 4000 Watt Peak (2000W RMS) 12" X-Series Dual 1-Ohm SPL Subwoofer

XCW121 4000 Watt Peak (2000W RMS) 12" X-Series Dual 1-Ohm SPL Subwoofer

Product Details: 12" Dual 1 ohms X Series SPL Subwoofer Power Handling: Peak: 4000 watts RMS: 2000 watts Designed for Extremely Low Bass 30 mm Xmax (One Way) Enhanced Woven Fiber Paper Composite Cone Custom High-Roll Foam Surround with Black Nylon Stitching Precision-Engineered Custom Tooled Die-Cast Aluminum Basket with Reinforced X Bracing for Structural Strength Vent Cooling Spacer to Maintain Optimal Airflow and Keep the Voice Coil Cool 3.0" High Temperature Flat Wire CCAW Aluminum Voice coil with Black Aluminum Former 4-Layer Linear Roll Spider with Integrated Tinsel Leads for Enhanced Linearity and Durability Optimized High-Velocity Pole Vent One-piece T-yoke with Vented Magnet Gap for Efficient Heat Dissipation 409 oz. Triple Stacked Ferrite Magnet with Protective Rubber Boot Heavy-Duty 4-Gauge Hex Key Speaker Terminals Frequency Response: 20 - 200 Hz Resonance Frequency (Fs): 35.9 Hz Sensitivity: 85.6 dB Recommended ported box volume: 2.5 cubic feet Top-mount depth: 10.35" Cutout diameter: 11.22" CTA-2031 Compliant 1-year Warranty from the Original Purchase Date

USD 581.99

You May Also Like