Name: Plus4 Bimetal Nozzle hotend
Brand: QIDI Technology
Price: 44.99 USD
Availability: InStock

USD 44.99

Description

It is recommended to use only one type of filament in a single nozzle. Switching between multiple filaments in one nozzle may cause nozzle blockage.

QIDI Technology promo code

You could save on QIDI Technology Plus4 Bimetal Nozzle hotend with a QIDI Technology promo code:

$20 off

268 uses

high

worked about 2 months ago

$20 Off Storewide at QIDI Technology

View all QIDI Technology coupons and promo codes

QIDI Cool Plate

QIDI Cool Plate Upgrade your 3D printing experience with our Cool Plate, designed for PLA/PETG. Say goodbye to print failures Super sticky coating designed for PLA and PETG filaments can provide good adhesion to the printer and effectively improve print success rate. No adhesive is required, the bottom of the print is still smooth and stable, and the bottom of the print is reduced when printing large objects. Eliminating Adhesion Issues QIDI cool plate is suitable for surfaces with bad shape surface. It can still provide super strong adhesion with a small contact area. It avoids the situation where the prints are scattered all over the floor when removing the printing plate. How to remove prints from Cool Plate Use the scrapper included with your printer to gently lift the print, then pry it off carefully. If the print is stuck too tightly, wait for the print plate to cool before removing it. The surface is soft. Be careful when using a scraper to remove printed parts. About the maintenance of QIDI Cool plate You can clean the surface with water and detergent if heavy dirt appears. DO NOT use organic solvents (especially acetone) to clean the build plate, as it will damage the surface adhesive layer. The QIDI PLA Silk material exhibits strong adhesion on the QIDI Cool Plate, which may damage printed models. Therefore, we do not recommend using Silk material on the QIDI Cool Plate. For users printing with third-party PLA Silk materials, please select the Generic PLA Silk preset in QIDI Studio and evaluate material compatibility based on the specific conditions. Product specifications Item Specifications Material Spring steel plate + low temperature super sticky coating Color Blue Surface temperature resistance 120℃ Thickness Spring steel plate 0.5mm 2X Coating on each side,Each Coating 0.05mm The top edge of the printing plate may appear thicker due to paint accumulation, which is normal Printing size 305*305mm/245*245mm Packing size 375*345*15mm/300*265*15mm Packing weight 0.5kg/0.35kg Why Choose This Cool Plate? Easy Maintenance: QIDI Cool Plate has good adhesion and does not require adhesives or frequent cleaning. In case of severe dirt, the surface can be cleaned with water and detergent.Good adhesion: After printing, the print can be firmly attached to the plate without parts falling to the ground.Durable coating: Cool Plate uses a durable coating for long-lasting performance (scratches, dents, and cracks due to printing are normal).Designed for PLA/PETG: Low-temperature printing is more suitable for PLA and PETG, which saves more power while ensuring good printing results.SpecificationsSpring steel plate: 0.5mmCoating: 0.05mm spring steelNet weight: 350gSurface temperature resistance: 120℃Use this QIDI Cool Plate - designed to make your every print achieve high-quality results while saving power. QIDI Build Plate Cleaning Guide Arrival timeExpected to be in stock in local warehouses in 1-2 months. If you want to get it before then, you can choose to buy it from China, but you should also handle the customs clearance for shipments from China on your own.

USD 59.99