RDQ Source One V5 5" Freestyle Frame Kit
RaceDayQuadsRaceDayQuads
4.0

RDQ Source One V5 5" Freestyle Frame Kit

USD 41.99

Description

Press nuts are already installed in the frame! The brand new RDQ Source One V5 5" Freestyle Frame is here and ready for all your DJI needs. This new version will fit a full sized air unit! The SOURCE ONE is a wide-stance X configuration frame, popular for freestyle or free-range acrobatic flying. It is built to withstand harsh crashes and abuse. It fits and protects all the classic FPV components and is optimized for light weight. The SOURCE ONE is a perfect everyday workhorse for casual FPV flying and competitive freestyle. Read more about TBS's Source One project.   Be sure to check out our 5" frame selection as well as all our Source One V5 parts & accessories! About the Project The SOURCE ONE project is a first of its kind collaborative FPV frame project initiated by Team BlackSheep. The frame is donated to the community to empower creators and makers, and integrate best practices and current trends faster into a continuously manufactured product. In return, it allows the local distribution network to have cheap and direct access to a good frame in order to allow them compete in an increasingly predatory marketplace. The hope is for this frame to enable broad access to FPV thanks to a low price point, great documentation and wide availability of compatible parts and accessories, without violating other people’s intellectual property. Get Involved! 3D Printed Parts (STL) https://github.com/tbs-trappy/source_one/tree/master/3D Print Accessories 3D Printed files on Thingiverse: https://www.thingiverse.com/tag:sourceone  Build Guide: https://oscarliang.com/how-to-build-fpv-drone/ Project discussion: https://discordapp.com/invite/ZJGkHwF Project files: https://github.com/tbs-trappy/source_one  Specifications Wheelbase: 226mm Top Plate: 2mm Bottom Plate: 2.5mm Middle Plate: 2mm Arms Spacer: 6mm Standoff Height: 30mm and 22mm Camera plate: 2mm Arm Thickness: 6mm Stack Mounting: 30.5m30.5mm, 20x20mm and DJI Air Unit Weight: 123.5g Includes 1x RDQ Source One V5 5" Freestyle Frame Kit

Get a discount on RDQ Source One V5 5" Freestyle Frame Kit

You could save on RaceDayQuads RDQ Source One V5 5" Freestyle Frame Kit with a RaceDayQuads promo code:

    RaceDayQuads logo

    5% off

    7 uses
    high

    worked 4 months ago

    Score 5% off with coupon code
View all RaceDayQuads coupons and promo codes

More RaceDayQuads Products

BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GHz

BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GHz

The Meteor75 Pro O4 is a cutting-edge 1S HD whoop! With powerful 1102 22000KV motors, and Gemfan 45mm props , it is agile but lightweight. Equipped with the Matrix 1S 3IN1 HD FC and shock-absorbing components, it delivers smooth, HD footage. The updated canopy provides enhanced durability, this drone is ready for anyone! Check out all our pre-built quads and our BetaFPV selection! Features Enhanced Power Configuration Optimized for DJI O4 Air Unit Advanced Flight Controller Durable and User-Friendly Precision Flight Tuning Redesigned Canopy ADVANCED STABILITY WITH MATRIX 1S 3IN1 HD FC The Meteor75 Pro O4 features 1102 22000KV motors, GF 45mm 3-blade propellers, an enhanced 12A ESC, and the high-performance LAVA 1S 550mAh battery, delivering an exceptional balance of power and efficiency. This advanced setup seamlessly manages the size and weight of the DJI O4 Air Unit while achieving an impressive flight time of 5:30 minutes. With its finely tuned power system, you can confidently capture smooth, high-definition aerial footage on every flight. FLY STABLE, CAPTURE FULL HD To address the DJI O4 Air Unit's sensitivity to high-frequency vibrations caused by its built-in gyroscope for video stabilization, the Meteor75 Pro O4 incorporates dedicated shock-absorbing components. These components utilize four carefully designed shock-absorbing balls to securely connect the DJI O4 Camera to the bracket. This innovative design effectively isolates and absorbs high-frequency vibrations, ensuring smooth, stable footage and eliminating image shake or jello effects during FPV filming. It is perfect for creators seeking high-quality aerial videography. POWER SYSTEM The Meteor75 Pro O4 features 1102 22000KV motors, GF 45mm 3-blade propellers, an enhanced 12A ESC, and the high-performance LAVA 1S 550mAh battery, delivering an exceptional balance of power and efficiency. This advanced setup seamlessly manages the size and weight of the DJI O4 Air Unit while achieving an impressive flight time of 5:30 minutes. With its finely tuned power system, you can confidently capture smooth, high-definition aerial footage on every flight. METEOR75 PRO O4 VS. METEOR65 PRO O4 The Meteor65 Pro O4 and Meteor75 Pro O4 are both optimized for the DJI O4 Air Unit, featuring the Matrix 1S 3IN1 HD FC, shock-absorbing components, and a durable redesigned canopy. The Meteor65 Pro O4, with its 66mm wheelbase, 0802SE | 19500KV motors, and GF 35mm 3-blade propellers, offers up to 2:40 minutes of flight time. Meanwhile, the Meteor75 Pro O4 features a larger 80.8mm wheelbase, 1102 | 22000KV motors, and GF 45mm 3-blade propellers, providing an extended 5:30 minutes of flight time. Specifications Frame: Meteor75 Pro Brushless Whoop Frame (Transparent Gray) Item: Meteor75 Pro O4 Brushless Whoop Quadcopter Propellers: Gemfan 45mm 3-Blade Propellers Receiver: Onboard Serial ELRS 2.4G Battery: LAVA 1S 550mAh Battery Canopy: Canopy for O4 Air Unit Motors: 1102 22000KV Motor FC: Matrix 1S 3-IN-1 HD FC Camera: DJI O4 Camera VTX: DJI O4 Air Unit Wheelbase: 80.8mm Flight Time: 5:30 Weight: 37.20g Links FC Firmware and CLI Dump File Includes 1x BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GH 4x Shock-absorbing Balls for DJI O4 Camera 4x GF 35mm 3-blade Propellers 1x SH1.0-4Pin Adapter Cable 1x Type-C to SH1.0 Adapter 1x Hardware Set

USD 298.99

HGLRC Draknight 2" 2S Beginner RTF Kit

HGLRC Draknight 2" 2S Beginner RTF Kit

All products containing batteries must be shipped by a ground shipping method. The ultimate Beginner RTF kit is here! HGLRC Draknight 2" 2S Beginner RTF Kit. This kit comes with everything you need to get up in the air the same day it arrives. It is small but mighty, powered by 2S batteries its ready for both indoor and outdoor use.  The Radio also works with various simulators so you can practice even more! Check out our other pre-built quads,  as well as our whole HGLRC product line! Features Beginner-Friendly Flight Controller Powered by 2S LiPo Batteries Complete FPV Setup 2" Compact Design Durable Build Specifications REMOTE CONTROLLER Common Operations: Frequency Pairing, Power Adjustment, Joystick Calibration Switch Design: Mix and Match (Three-Stage and Two-Stage) Model: HGLRC C1 Radio Controller w/ Dongle - ELRS Third-Party Compatibility: Receivers and Tuners USB Interfaces: USB-A, USB-C (Dual Interfaces) Radio Frequency Module: Built-in 500mW Remote Control Distance: Extended Wireless Dongle Compatibility: Yes Operation Procedures: Simplified Signal Transmission: Stable Type: Handle Control Screen: Not Required Level: Entry-Level Value: High-Value DARKNIGHT DRONE Built-in image transmission: 0-25-100-400mW (adjustable) Weight: 44.3g (excluding the weight of the receiver) Recommended propeller: Gemfan2023 propeller Flight control firmware: HGLRCF411SX1280_15A Firmware: BF HGLR-HGLRCF411SX1280_15A Built-in receiver: UART ExpressLRS 2.4G Maximum supported paddle: 2 inches ESC protocol: Dshot150/300/600 ESC firmware: Z-H-30 (Blheli_S) Master control: STM32F411 Continuous current: 12A Input voltage: 2-4S Lipo Peak current: 15A (5s) BEC output: 5V/1.5A Wheelbase: 91.8mm Specter 1003 Motor Motor: 10000KV (2s) Size: 104x104mm Type: 52 inch rack DONGLE  Built-in ELRS Maximum Supported Frequency: 250MHz External Receiver Support Protocol: CRSF Protocol ELRS Firmware Upgrade Method: Wifi or USB Plug ELRS Firmware Name: HGLRC 2.4GHz Receiving Distance: More Than 200m ELRS Firmware Version: ELRS 3.0 Size: 74x21x12.5mm Working Voltage: 5V Interface: USB-C Weight: 9.5g Includes 1x HGLRC Draknight 2" 2S Beginner RTF Kit 1x VR100 5.8GHz Analog Transmission Goggles 1x 82mm Philips 1.5 Screwdriver 1x Darknight Instruction Manual 1x 3.5mm Conversion Cable 1x M2 Hexagonal L Wrench 1x USB-C Charging Cable 1x 915MHz FPC Antenna 1x C3 Charger Manual 1x C1 Remote Control 1x 2" Darknight Drone 1x Charge Power Cord 1x Propeller Extractor 1x Wireless Dongle 1x Mirco Data Cable 2x 720mah Battery 1x C3 Charger 8x Propellers 1x Sticker 1x Case 1x Card

USD 449.99

HGLRC Draknight 2" Micro Frame Kit

HGLRC Draknight 2" Micro Frame Kit

A stellar micro drone from HGLRC, a 2" toothpick frame focusing on high-efficiency and low-noise flight performance. This frame comes with a lightweight and durable aluminum top piece.  Be sure to check out all our 2" frames, and all our HGLRC products! Specifications Material 3K carbon fiber Wheelbase: 91mm Dimensions: 74x84mm Integrated bottom plate: 2mm Internal minimum height: 12mm Flight controller mounting: 25.5x25.5mm  Camera mounting: 14x14mm Frame  weight: 17g  Motor Bolt Pattern: 6mm-Tri Includes 1x HGLRC Draknight 2" Micro Frame Kit

USD 22.49

(PRE-ORDER) EMAX RTF Tinyhawk II Ready to Fly Analog Kit w/ Goggles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

(PRE-ORDER) EMAX RTF Tinyhawk II Ready to Fly Analog Kit w/ Goggles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

All PRE-ORDERS shipping ASAP!! All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

USD 208.99

You May Also Like

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set This two-cup and teapot combo packs light for travel and looks beautiful on a desk at home or at work. The set features: One teapot, complete with lid and built-in filter; Two nicely-sized cups that fit snug on top and bottom of the pot; Carrying case for travel and storage; Circular wooden button-style handles; Small rectangular tea towel. When I worked in Beijing at the Nature Conservancy, I saw a lot of office workers would keep a cup-pot combo on hand so they could brew great tea without cluttering up their work space. Needless to say, I got one myself too. It’s a great fit for: Home-office tea-making; Picnic/travel tea-making; Tea friends with less space for storing tea equipment; Tea Party Size? This set is best for personal use or with one partner (1-2 people).   @yourteaguy Would you the cup pot combo? #tea #teatime #celtics #basketball #teapot #happytime #jessesteahouse ♬ Pieces (Solo Piano Version) - Danilo Stankovic       Save on tea with this teapot! Purchase the pot and sampler combo from the drop-down menu above to save $5 on a tea sampler! Jesse’s Review: This cup-pot combo is straight-up a great way to make tea. It’s very practical and yet the results are still top-tier. If you don’t have the space, time, or energy for a full Gongfu-style tea set, this is for you. I keep one of these on my desk at home in case I need to really get work done and can’t do the whole tea ceremony, and I also have a second set just for traveling and taking to friends’ houses. One note - because this set doesn’t come with a pitcher, you need to be sure to only add as much water as you need to drink your next cup. Otherwise, you will be left with extra tea inside the pot which keeps over-steeping. Don’t Forget Your Tea Pets! It’s not gongfu tea time without a tea pet! Check out the tea pets and add one to your order!   Jesse's Quality Guarantee! When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 40.00

Jesse's Teahouse
Jesse's Teahouse