(PREORDER) EMAX Tinyhawk Lite FPV Drone RTF Kit w/ Goggles and Radio
RaceDayQuadsRaceDayQuads
4.0

(PREORDER) EMAX Tinyhawk Lite FPV Drone RTF Kit w/ Goggles and Radio

USD 189.99

Description

The EMAX Tinyhawk Lite RTF Kit is the perfect entry point into the whoop scene, giving new pilots everything they need in one box. It comes with a tough 75mm micro quad, analog FPV system, E8 radio, and Transporter 2 goggles for a true plug-and-play experience. Built for tight indoor spots but capable of small outdoor runs, it’s a smooth way to jump into FPV flying. Check out our other RTF combos, all our pre-built quads, as well as the rest of our Emax selection! All products containing batteries must be shipped by a ground shipping method. Video Features All-in-one ready-to-fly kit: drone, radio, and goggles included Lightweight micro quad, perfect for indoor or small outdoor flights Crash-resistant frame built for beginners Simple, beginner-friendly transmitter Includes E8 Transmitter and Transporter 2 goggles FPV camera for immersive first-person flying Budget-friendly way to start your FPV journey   Specifications TINYHAWK LITE Flight Controller: STM32F411 (100MHz), 1S input, EMAX_TINYHAWKF4SX1280 Firmware Receiver: Built-in ELRS (2.4GHz), SX1280 RF module, CRSF protocol Configuration: Betaflight Configurator for VTX, OSD, and binding ESC: 4-in-1 brushed, 10A, DC 3.7–4.2V input FPV Camera: RunCam Nano 3 Analog VTX Power: 0/25mW/100mW/400mW VTX: 32-bit, 40CH, open-source Dimensions: 104 x 104 x 52mm Weight: ~37g (without battery) Motor: 0816 coreless DC 3.7V Propellers: HQ 40mm 3-blade Battery: 1S HV 750mAh Model: Tinyhawk Lite Wheelbase: 75mm TRANSPORTER 2 GOGGLES Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system Maximum Size: (Without antenna - Folded) 155x100x90mm Frequency: 5.8GHz(5658MHz-5945MHz) Video: VGA/D1/HD (Off/3min/5min/10min) DVR: 32 GB TF card (max), MJPEG, AVI Battery: 1300mAh Lithium-ion battery Screen resolution: 480X800 Weight (With battery): 398g Working Voltage: 4.2V-3.7V Screen size: 4.3 inch Type: Analog E8 ELRS RADIO TRANSMITTER Charging System: Built-in USB 5V--1A linear lithium-ion battery charging system External interface: Micro USB,3.5mm Audio interface (wired coach interface) Frequency 2.4GHz (2400MHz-2483.5MHz) Maximum Size: L*W*H=150x140x45mm Battery: 18650 Lithium-ion battery Weight (Without Battery): 260g Number Of Channels: 8CH Working Voltage: 4.2V-3.3V Protocol: ELRS Output: 22dbm Includes 1x EMAX Tinyhawk Lite 75mm Micro Whoop - ELRS 2.4GHz 1x EMAX Transporter 2 Goggles 1x EMAX E8 Radio Transmitter 1x Action Camera Mount 4x Spare Propellers 1x Battery Charger 1x Hardware Kit 1x Battery

RaceDayQuads deal

You could save on RaceDayQuads (PREORDER) EMAX Tinyhawk Lite FPV Drone RTF Kit w/ Goggles and Radio with a RaceDayQuads promo code:

    RaceDayQuads logo

    5% off

    7 uses
    high

    worked 7 months ago

    Score 5% off with coupon code
View all RaceDayQuads coupons and promo codes

More RaceDayQuads Products

BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GHz

BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GHz

The Meteor75 Pro O4 is a cutting-edge 1S HD whoop! With powerful 1102 22000KV motors, and Gemfan 45mm props , it is agile but lightweight. Equipped with the Matrix 1S 3IN1 HD FC and shock-absorbing components, it delivers smooth, HD footage. The updated canopy provides enhanced durability, this drone is ready for anyone! Check out all our pre-built quads and our BetaFPV selection! Features Enhanced Power Configuration Optimized for DJI O4 Air Unit Advanced Flight Controller Durable and User-Friendly Precision Flight Tuning Redesigned Canopy ADVANCED STABILITY WITH MATRIX 1S 3IN1 HD FC The Meteor75 Pro O4 features 1102 22000KV motors, GF 45mm 3-blade propellers, an enhanced 12A ESC, and the high-performance LAVA 1S 550mAh battery, delivering an exceptional balance of power and efficiency. This advanced setup seamlessly manages the size and weight of the DJI O4 Air Unit while achieving an impressive flight time of 5:30 minutes. With its finely tuned power system, you can confidently capture smooth, high-definition aerial footage on every flight. FLY STABLE, CAPTURE FULL HD To address the DJI O4 Air Unit's sensitivity to high-frequency vibrations caused by its built-in gyroscope for video stabilization, the Meteor75 Pro O4 incorporates dedicated shock-absorbing components. These components utilize four carefully designed shock-absorbing balls to securely connect the DJI O4 Camera to the bracket. This innovative design effectively isolates and absorbs high-frequency vibrations, ensuring smooth, stable footage and eliminating image shake or jello effects during FPV filming. It is perfect for creators seeking high-quality aerial videography. POWER SYSTEM The Meteor75 Pro O4 features 1102 22000KV motors, GF 45mm 3-blade propellers, an enhanced 12A ESC, and the high-performance LAVA 1S 550mAh battery, delivering an exceptional balance of power and efficiency. This advanced setup seamlessly manages the size and weight of the DJI O4 Air Unit while achieving an impressive flight time of 5:30 minutes. With its finely tuned power system, you can confidently capture smooth, high-definition aerial footage on every flight. METEOR75 PRO O4 VS. METEOR65 PRO O4 The Meteor65 Pro O4 and Meteor75 Pro O4 are both optimized for the DJI O4 Air Unit, featuring the Matrix 1S 3IN1 HD FC, shock-absorbing components, and a durable redesigned canopy. The Meteor65 Pro O4, with its 66mm wheelbase, 0802SE | 19500KV motors, and GF 35mm 3-blade propellers, offers up to 2:40 minutes of flight time. Meanwhile, the Meteor75 Pro O4 features a larger 80.8mm wheelbase, 1102 | 22000KV motors, and GF 45mm 3-blade propellers, providing an extended 5:30 minutes of flight time. Specifications Frame: Meteor75 Pro Brushless Whoop Frame (Transparent Gray) Item: Meteor75 Pro O4 Brushless Whoop Quadcopter Propellers: Gemfan 45mm 3-Blade Propellers Receiver: Onboard Serial ELRS 2.4G Battery: LAVA 1S 550mAh Battery Canopy: Canopy for O4 Air Unit Motors: 1102 22000KV Motor FC: Matrix 1S 3-IN-1 HD FC Camera: DJI O4 Camera VTX: DJI O4 Air Unit Wheelbase: 80.8mm Flight Time: 5:30 Weight: 37.20g Links FC Firmware and CLI Dump File Includes 1x BETAFPV Meteor75 Pro Brushless Whoop HD w/ DJI O4 - ELRS 2.4GH 4x Shock-absorbing Balls for DJI O4 Camera 4x GF 35mm 3-blade Propellers 1x SH1.0-4Pin Adapter Cable 1x Type-C to SH1.0 Adapter 1x Hardware Set

USD 298.99

HGLRC Draknight 2" 2S Beginner RTF Kit

HGLRC Draknight 2" 2S Beginner RTF Kit

All products containing batteries must be shipped by a ground shipping method. The ultimate Beginner RTF kit is here! HGLRC Draknight 2" 2S Beginner RTF Kit. This kit comes with everything you need to get up in the air the same day it arrives. It is small but mighty, powered by 2S batteries its ready for both indoor and outdoor use.  The Radio also works with various simulators so you can practice even more! Check out our other pre-built quads,  as well as our whole HGLRC product line! Features Beginner-Friendly Flight Controller Powered by 2S LiPo Batteries Complete FPV Setup 2" Compact Design Durable Build Specifications REMOTE CONTROLLER Common Operations: Frequency Pairing, Power Adjustment, Joystick Calibration Switch Design: Mix and Match (Three-Stage and Two-Stage) Model: HGLRC C1 Radio Controller w/ Dongle - ELRS Third-Party Compatibility: Receivers and Tuners USB Interfaces: USB-A, USB-C (Dual Interfaces) Radio Frequency Module: Built-in 500mW Remote Control Distance: Extended Wireless Dongle Compatibility: Yes Operation Procedures: Simplified Signal Transmission: Stable Type: Handle Control Screen: Not Required Level: Entry-Level Value: High-Value DARKNIGHT DRONE Built-in image transmission: 0-25-100-400mW (adjustable) Weight: 44.3g (excluding the weight of the receiver) Recommended propeller: Gemfan2023 propeller Flight control firmware: HGLRCF411SX1280_15A Firmware: BF HGLR-HGLRCF411SX1280_15A Built-in receiver: UART ExpressLRS 2.4G Maximum supported paddle: 2 inches ESC protocol: Dshot150/300/600 ESC firmware: Z-H-30 (Blheli_S) Master control: STM32F411 Continuous current: 12A Input voltage: 2-4S Lipo Peak current: 15A (5s) BEC output: 5V/1.5A Wheelbase: 91.8mm Specter 1003 Motor Motor: 10000KV (2s) Size: 104x104mm Type: 52 inch rack DONGLE  Built-in ELRS Maximum Supported Frequency: 250MHz External Receiver Support Protocol: CRSF Protocol ELRS Firmware Upgrade Method: Wifi or USB Plug ELRS Firmware Name: HGLRC 2.4GHz Receiving Distance: More Than 200m ELRS Firmware Version: ELRS 3.0 Size: 74x21x12.5mm Working Voltage: 5V Interface: USB-C Weight: 9.5g Includes 1x HGLRC Draknight 2" 2S Beginner RTF Kit 1x VR100 5.8GHz Analog Transmission Goggles 1x 82mm Philips 1.5 Screwdriver 1x Darknight Instruction Manual 1x 3.5mm Conversion Cable 1x M2 Hexagonal L Wrench 1x USB-C Charging Cable 1x 915MHz FPC Antenna 1x C3 Charger Manual 1x C1 Remote Control 1x 2" Darknight Drone 1x Charge Power Cord 1x Propeller Extractor 1x Wireless Dongle 1x Mirco Data Cable 2x 720mah Battery 1x C3 Charger 8x Propellers 1x Sticker 1x Case 1x Card

USD 449.99

HGLRC Draknight 2" Micro Frame Kit

HGLRC Draknight 2" Micro Frame Kit

A stellar micro drone from HGLRC, a 2" toothpick frame focusing on high-efficiency and low-noise flight performance. This frame comes with a lightweight and durable aluminum top piece.  Be sure to check out all our 2" frames, and all our HGLRC products! Specifications Material 3K carbon fiber Wheelbase: 91mm Dimensions: 74x84mm Integrated bottom plate: 2mm Internal minimum height: 12mm Flight controller mounting: 25.5x25.5mm  Camera mounting: 14x14mm Frame  weight: 17g  Motor Bolt Pattern: 6mm-Tri Includes 1x HGLRC Draknight 2" Micro Frame Kit

USD 22.49

(PRE-ORDER) EMAX RTF Tinyhawk II Ready to Fly Analog Kit w/ Goggles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

(PRE-ORDER) EMAX RTF Tinyhawk II Ready to Fly Analog Kit w/ Goggles, Radio Transmitter, Case and 75mm Indoor Racing Whoop Drone

All PRE-ORDERS shipping ASAP!! All items with batteries must be shipped by a ground shipping method. The TinyHawk 2 RTF kit has everything you need to enjoy micro flight, all packed into a handy carrying case! This is truly the ideal way to try out FPV!  2 batteries are included (a 1S and a 2S), but if you want to maximize your air time, we recommend picking up a few of the following RDQ Series LiPos: 1S 450mAh - PH2.0 2S 300mAh - PH2.0 Check out our other RTF combos, all our pre-built quads, all things Tinyhawk, and our EMAX selection!   Specifications Frame Wheelbase: 75mm Dry Weight: 31.2g All Up Weight: 43.5g with 1x 450mAh 1S battery Frame Material: Polypropylene  Motors Stator Size: 0802 Kv: 16000kv Propeller Mount: Push-On Avan TH-style Propeller: Avan Turtlemode 4-Blade All-In-One (AIO) Flight Controller Flight Controller: F4 (MATEKF411RX Firmware) ESC: 4-in-1 5A BlHeli_S Receiver: EMAX SPI Receiver (Compatible with FrSky D8 mode) Battery Connector: JST-PH2.0 FPV System VTX Power: 25/100/200mw Switchable Channels: 37CH incl. Raceband Camera: RunCam Nano 2 1/3" 700TVL CMOS Smart Audio Connected Includes 1x Tinyhawk II FPV Racing Drone 1x EMAX Transporter 5.8G FPV Goggles 1x EMAX Transporter 18650 Goggle Battery Pack w/ USB Charging 1x EMAX E6 Transmitter 1x EMAX 450mAh 1S HV Battery 1x EMAX 300mAh 2S HV Battery 2x CCW + 2x CW Spare Props 1x 1S-2S USB LiPo Charger 1x Screwdriver + Hardware Kit 1x Micro USB Charging Cable 1x Faux Carbon Fiber Carrying Case

USD 208.99

You May Also Like