900: SpiderMonkey Accessory Holster Kit for Flash, Light Meter, Battery Pack

Name: 900: SpiderMonkey Accessory Holster Kit for Flash, Light Meter, Battery Pack
Brand: Spider Holster
Price: 34.95 CAD
Availability: InStock

CAD 34.95

Description

COMPATIBILITY NOTE:Not compatible with round headed flashes (such as Godox A1)The SpiderMonkey Kit is a two-piece system that can hold a flash, light meter, battery pack, or other lightweight accessory on your hip.This system provides a quick-draw method of retrieving gear, eliminating the need to hunt through your bag for an item. Multiple SpiderMonkey base clips and tabs (sold separately) can be used to have multiple accessories within arm's reach. Spider Accessory Base ClipThe reinforced polymer Spider Accessory Base Clip attaches to any belt (up to 2 inch height), pocket, or backpack strap and lets you quickly swap out your gear with the press of a button. The base clip will automatically lock whenever a Spider Adhesive Accessory Tab or other accessory has been inserted. To release the tab and accessory, press the button on top of the base clip and pull the accessory out.The Spider Accessory Base Clip pairs with all other SpiderMonkey Accessories. Adhesive Accessory TabsThe Spider Adhesive Accessory Tabs attach to any lightweight accessory with a flat or slightly curved surface using a high-strength 3M adhesive.Spider Adhesive Accessory Tabs are built from a durable nylon composite. While they are durable, they are also flexible and can be attached to slightly rounded surfaces. Pairs with the Spider Accessory Base Clip and Spider Studio Assistant IMPORTANT: >> This product is designed to hold light weight camera accessories up to 1lb / 16oz. This is product is not designed for carrying your camera. >> For best results when applying a SpiderMonkey Adhesive Tab, press and hold when applying for 60 seconds, and then allow 24 hours for the adhesive to cure. ✅ CLIP TO ANY BELT: Attach the Spider Accessory Clip to any belt, bag strap or pocket. ✅ SELF LOCKING BELT CLIP DESIGN: The SpiderMonkey clip will self lock every time you insert your Spider equipped gear. ✅ QUICK-DRAW YOUR GEAR: Press the button at the top of the SpiderMonkey base clip to unlock and grab your gear! ✅ PEEL AND STICK TABS: Hold a flash, light meter, battery pack, or other accessory with a flat surface. Recommended load limit of 1lb. (454g) ✅ GENUINE 3M ADHESIVE: Attaches this Spider tab to your photo accessory such as a flash, battery pack, light meter, etc. ✅ INCLUDES: 1 SpiderMonkey Base Clip, 2 SpiderMonkey Adhesive Accessory Tabs

Get a discount on 900: SpiderMonkey Accessory Holster Kit for Flash, Light Meter, Battery Pack

You could save on Spider Holster 900: SpiderMonkey Accessory Holster Kit for Flash, Light Meter, Battery Pack with a Spider Holster promo code:

20% off

5 uses

high

worked about 1 month ago

20% Off Select Items at Spider Holster

View all Spider Holster coupons and promo codes

More Spider Holster Products

SpiderPro Camera System - PRO Bundle

-- NOTE -- This product bundle is available for DSLR and Mirrorless cameras. REVIEW YOUR SELECTION before adding to cart!INCLUDES:(1) SpiderPro Single Camera Belt v2 + Camera Holster(1) DSLR Camera Plate / Mirrorless Plate (1) Memory Card Organizer Pouch(1) Lens Pouch v2 (70-200mm)Description: Designed by photographers, the SpiderPro v2 Single Camera System is the perfect carrying solution for the professional looking for a strap-free system. Take the weight of your cameras off your neck and shoot longer without fatigue. Your camera will be comfortably secured, allowing more shots per shoot with easy access. SpiderPro Single Camera Belt v2The Spider belt features a secure three-point release belt buckle, to prevent the belt from coming loose while in use. The belt can be easily adjusted to the user’s belt size by lifting the high-strength Velcro strap, and sliding the camera pad to sit comfortably on the hips. There is also a quick-adjust strap near the buckle that can be used to quickly tighten / loosen the belt slightly on the go. This belt has a pre-installed SpiderPro Camera Holster v2. SpiderPro Camera Holster v2The SpiderPro Camera Holster features a two-position, self-locking design for both security and quick access in any shooting situation. The holster will automatically lock when you pair it with one of our Spider camera plates. To unlock the holster, lift the lock lever upwards and remove your camera. For even faster access, you can disengage the lock and the holster's unique design will keep the camera secure and easily accessible for a quick draw. DSLR Camera PlatesThe SpiderPro DSLR Camera Plate attaches to any DSLR using your camera's 1/4"x 20 tripod mount, and features anti-slip rubber pads for stable, secure install, and an anti-twist Spider pin for added security. The SpiderPro DSLR Camera Plate has (2) built-in 1/4"x20 mounts that can be used for your tripod plates, eliminating the need to switch plates. Mirrorless Camera PlateLight weight and durable, the Spider Mirrorless Camera Plate is designed for mirrorless cameras. The sliding plate design accommodates most mirrorless camera bodies and does not block the battery door. The plate attaches to the camera's 1/4"x20 tripod mount, and features anti-slip rubber pads for stable, secure install, and an anti-twist Spider pin for added security. The Spider Mirrorless Camera Plate has built-in compatibility for Arca-Swiss style tripods, and acts as an Arca Swiss tripod adapter. It can also be used with other style tripod adapter plates. This plate has (1) built-in 1/4"x20 mount that you can attach your tripod plate / quick release into. This eliminates the need to take our plate off to attach your gear! Are you using a Mirrorless Camera + Vertical Grip?If you are using a mirrorless camera with a vertical grip, you will need to use one of our DSLR Camera Plates instead of the Mirrorless Camera Plate. We also have a DSLR Single Camera System and DSLR Dual Camera System that include these plates.

USD 288.00

255: SpiderPro Dual Mirrorless Camera System v2

Description: Designed by photographers, the SpiderPro Single Camera System is the perfect carrying solution for the professional looking for a strap-free system. Take the weight of your cameras off your neck and shoot longer without fatigue. Your camera will be comfortably secured, allowing more shots per shoot with easy access. SpiderPro Camera Belt v2The Spider belt features a secure three-point release belt buckle, to prevent the belt from coming loose while in use. The belt can be easily adjusted to the user’s belt size by lifting the high-strength Velcro strap, and sliding the camera pad to sit comfortably on the hips. There is also a quick-adjust strap near the buckle that can be used to quickly tighten / loosen the belt slightly on the go. SpiderPro Camera Holster v2The SpiderPro Camera Holster features a two-position, self-locking design for both security and quick access in any shooting situation. The holster will automatically lock when you pair it with one of our Spider camera plates. To unlock the holster, lift the lock lever upwards and remove your camera. For even faster access, you can disengage the lock by pressing the lock lever up until it clicks, it will remain unlocked until you push the lever back down into the self-locking position. Keeping it in the “unlocked” position keeps your camera secure and easily accessible for a quick draw. Mirrorless Camera PlateLight weight and durable, the Spider Mirrorless Camera Plate is designed for mirrorless cameras. The sliding plate design accommodates most mirrorless camera bodies and does not block the battery door. It attaches to the camera's 1/4"x20 tripod mount, and features anti-slip rubber pads for stable, secure install, and an anti-twist Spider pin for added security. The Spider Mirrorless Camera Plate has built-in compatibility for Arca-Swiss style tripods, and acts as an Arca Swiss tripod adapter. It can also be used with other style tripod adapter plates. Product Highlights: Ergonomic design to eliminate fatigue Durable, wear resistant materials Heavy duty, triple-lock buckle keeps the belt secure Quick draw access to your camera Two position, self-locking camera holster Camera Plate has 1/4"x20 mounts for compatibility with all tripod adapter plates Belt fits waists 28 - 50 inches (71 - 127cm) Includes:(1) SpiderPro Single Camera Belt v2 + Camera Holster (1) Second Camera Pad + Camera Holster (2) Mirrorless Camera Plates (1) Lens Collar Plate v2 IMPORTANT:We do not recommend moving the pre-installed Spider Pin.We pre-install a pin into the right side with Loctite to ensure a secure hold. If a pin is required for carrying on the opposite side, we recommend purchasing an additional Spider Anti-Twist Pin and installing separately. Are you using a Mirrorless Camera + Vertical Grip?If you are using a mirrorless camera with a vertical grip, you will need to use one of our DSLR Camera Plates instead of the Mirrorless Camera Plate provided in this kit. We also have a DSLR Single Camera System and DSLR Dual Camera System that include these plates instead.

USD 299.00

501: SpiderPro Anti-Twist Plate Pin (for DSLR, Mirrorless and Lens Collar Plates)

This SpiderPro v2 Anti-Twist Pin is designed to eliminate issues with threaded pins, such as becoming unthreaded over time. This adds yet another layer of security for Spider users. The Spider Pin is compatible with all Spider Camera Holsters.This product installs into all Spider Camera Plates including: DSLR Plate Mirrorless Plate Lens Collar Plate v2 SpiderPro Clamp v2 ✅ SECURE: Pin design helps prevent de-threading ✅ HEAVY DUTY: Stainless Steel construction is ready for daily use, in and out of the studio. ✅ INCLUDES: 1 Spider Anti-Twist Pin

USD 9.00

250: SpiderPro Single Mirrorless Camera System v2

Description: Designed by photographers, the SpiderPro Single Camera System is the perfect carrying solution for the professional looking for a strap-free system. Take the weight of your cameras off your neck and shoot longer without fatigue. Your camera will be comfortably secured, allowing more shots per shoot with easy access. SpiderPro Single Camera Belt v2The Spider belt features a secure three-point release belt buckle, to prevent the belt from coming loose while in use. The belt can be easily adjusted to the user’s belt size by lifting the high-strength Velcro strap, and sliding the camera pad to sit comfortably on the hips. There is also a quick-adjust strap near the buckle that can be used to quickly tighten / loosen the belt slightly on the go. SpiderPro Camera Holster v2The SpiderPro Camera Holster features a two-position, self-locking design for both security and quick access in any shooting situation. The holster will automatically lock when you pair it with one of our Spider camera plates. To unlock the holster, lift the lock lever upwards and remove your camera. For even faster access, you can disengage the lock by pressing the lock lever up until it clicks, it will remain unlocked until you push the lever back down into the self-locking position. Keeping it in the “unlocked” position keeps your camera secure and easily accessible for a quick draw. Mirrorless Camera PlateLight weight and durable, the Spider Mirrorless Camera Plate is designed for mirrorless cameras. The sliding plate design accommodates most mirrorless camera bodies and does not block the battery door. It attaches to the camera's 1/4"x20 tripod mount, and features anti-slip rubber pads for stable, secure install, and an anti-twist Spider pin for added security. The Spider Mirrorless Camera Plate has built-in compatibility for Arca-Swiss style tripods, and acts as an Arca Swiss tripod adapter. It can also be used with other style tripod adapter plates. Product Highlights: Ergonomic design to eliminate fatigue Durable, wear resistant materials Heavy duty, triple-lock buckle keeps the belt secure Quick draw access to your camera Two position, self-locking camera holster Camera Plate has 1/4"x20 mounts for compatibility with all tripod adapter plates Belt fits waists 28 - 50 inches (71 - 127cm) Includes:(1) SpiderPro Single Camera Belt v2 + Camera Holster(1) SpiderPro Mirrorless Camera Plate IMPORTANT:We do not recommend moving the pre-installed Spider Pin.We pre-install a pin into the right side with Loctite to ensure a secure hold. If a pin is required for carrying on the opposite side, we recommend purchasing an additional Spider Anti-Twist Pin and installing separately. Are you using a Mirrorless Camera + Vertical Grip?If you are using a mirrorless camera with a vertical grip, you will need to use one of our DSLR Camera Plates instead of the Mirrorless Camera Plate provided in this kit. We also have a DSLR Single Camera System and DSLR Dual Camera System that include these plates instead.

USD 179.00