SUNLU AMS Heater, Upgraded your Bambu AMS, Enables Drying while Printing
SunluSunlu
4.0

SUNLU AMS Heater, Upgraded your Bambu AMS, Enables Drying while Printing

USD 109.99

Description

Drying and printing are performed simultaneously. This is a heater that can upgrade the upper cover of the AMS. Compared to the traditional printing process using the AMS, which requires drying before printing, the upgraded version allows for simultaneous printing and drying. High-efficiency heating with uniform temperature distribution, reaching 70°C within 20 minutes. The dual airflow design ensures even heat circulation, preventing localized overheating of materials and effectively reducing the risk of thermal deformation. High compatibility: After upgrading to the AMS Heater, it supports stacked 16-color printing and saves space. Upgrades the heater for the AMS Generation 1 upper cover, seamlessly integrating with the Generation 1 seal strip and fully compatible with the Generation 1 seal preservation function. Simple upgrade process: Loosen—disassemble—tighten, completed in just 2 minutes. Intelligent humidity monitoring:  ① Humidity mode default heating temperature: 55°C—users can adjust and save the temperature.  ② Default operating time: 6 hours.  ③ After the countdown ends, the device does not shut down; it automatically starts heating when humidity rises to 50% and stops heating when humidity drops to 20%.  ④ In rH mode, users can adjust humidity (range: 25%–50%).  After adjustment, the humidity automatically starts using this set value. Safe and Reliable:PTC heating. Dual-level protection with a temperature control switch. Software-based intelligent temperature control, real-time temperature monitoring, and automatic control of the heating system. Maximum drying temperature of 70°C. Alarms are triggered when the temperature exceeds the set value by 10°C, when the temperature fails to rise, or when the fan malfunctions. The device operates according to the set time and automatically shuts down when the time reaches zero. Product dimensions 363mm × 278mm × 131mm (LWH) Outer box dimensions 415mm × 316mm × 190mm Maximum reel size φ250mm × 153mm (1kg × 4) Product net weight 1.7KG Temperature setting range 35°C–70°C Humidity display range See display: 10%-90% Time setting range 0-99H Power input specifications AC 110V 60Hz or AC 220V 50Hz Maximum operating current 2.2A@230V 4.15A@120V Maximum operating power 500W Standby power 0.6W Filament outlet hole compatible wire diameter φ1.75mm

Try this code on SUNLU AMS Heater, Upgraded your Bambu AMS, Enables Drying while Printing

You could save on Sunlu SUNLU AMS Heater, Upgraded your Bambu AMS, Enables Drying while Printing with a Sunlu promo code:

    Sunlu logo

    3% off

    7 uses
    high

    worked 6 months ago

    Save 3% off with coupon
View all Sunlu coupons and promo codes

More Sunlu Products

[10KG Wholesale] Recycled Filament PLA, PETG, ABS, 3D Printer Filament 1KG/Roll

[10KG Wholesale] Recycled Filament PLA, PETG, ABS, 3D Printer Filament 1KG/Roll

SAVE THE PLANET AND DO IT TOGETHER WITH SUNLU Recycled Filament From Wasted Produced Materials READ BEFORE YOUR BUYING: A: What is SUNLU Recycled Filament?We just sell it to recover the scrap material. We're basically making 3d print filament out of our own Industrial scrap to keep it out of the landfills and to provide a very usable material, especially for prototyping. We don't make any money on it, we are just moving it out. It is an important part of SUNLU's plan to contribute to the world's environmental protection.Generally speaking, the waste raw materials and semi-finished products are recycled by the injection molding factories in the market and made into plastic tools and toys, such as plastic stools, plastic buckets, storage boxes, etc.As for SUNLU,we takes these wasted raw materials and semi-finished products, re-collects them, shapes them twice, and re-processes them into the new Recycled Filament.And we offer a really decent price for those who love 3D printing and willing to do their part to care for our earth. B: What is The Difference Between Recycled Filament and Normal Filament? There is no difference except that the color of Recycled Filament is un-controllable, and after secondary processing and production, it can be used normally and meet the same print quality standards as normal 3d print filament.This means that you purchase Recycled Filament in the same material, but the color may be different each time. It is great for doing prototyping and making small print. Because the price really much more lower than normal filaments, and the quantity is limited, so, we have decided to no longer offer a warranty on recycled Products. This is the same material as our regular PLA Product Lines. We've taken our PLA scraps and out of spec material (spools that were rejected during production due to over or under diameter readings), transition material and cut off waste and cut it into pellets that we can use to make filament! It works great, prints great, and is otherwise almost equal to our normal PLA lineup. We follow the same quality guidelines with a minimum target of ±0.02mm. Color: Color will vary on this product. Color selection is unavailable. There are none that are equal to our standard colors. Packaging: All items comes vacuum-sealed with desiccant in SUNLU brand box Size: To keep this product simple, we only offer it only in 1.75mm 1kg spool Warranty: Since this is reprocessed product, made from out of spec material, we cannot guarantee this product for replacement. However, we will assist you if it has severe issues that should not have left our plant anyway. Compatibility: They should work in any printer that uses 1.75mm filament.

USD 99.99

[$9.99 Per Roll] SILK Recycled Filament SILK 3D Printer Filament 1KG/Roll

[$9.99 Per Roll] SILK Recycled Filament SILK 3D Printer Filament 1KG/Roll

SAVE THE PLANET AND DO IT TOGETHER WITH SUNLU Recycled Filament From Wasted Produced Materials READ BEFORE YOUR BUYING: A: What is SUNLU Recycled Filament?We just sell it to recover the scrap material. We're basically making 3d print filament out of our own Industrial scrap to keep it out of the landfills and to provide a very usable material, especially for prototyping. We don't make any money on it, we are just moving it out. It is an important part of SUNLU's plan to contribute to the world's environmental protection.Generally speaking, the waste raw materials and semi-finished products are recycled by the injection molding factories in the market and made into plastic tools and toys, such as plastic stools, plastic buckets, storage boxes, etc.As for SUNLU,we takes these wasted raw materials and semi-finished products, re-collects them, shapes them twice, and re-processes them into the new Recycled Filament.And we offer a really decent price for those who love 3D printing and willing to do their part to care for our earth. B: What is The Difference Between Recycled Filament and Normal Filament? There is no difference except that the color of Recycled Filament is un-controllable, and after secondary processing and production, it can be used normally and meet the same print quality standards as normal 3d print filament.This means that you purchase Recycled Filament in the same material, but the color may be different each time. It is great for doing prototyping and making small print. Because the price really much more lower than normal filaments, and the quantity is limited, so, we have decided to no longer offer a warranty on recycled Products. This is the same material as our regular PLA Product Lines. We've taken our PLA scraps and out of spec material (spools that were rejected during production due to over or under diameter readings), transition material and cut off waste and cut it into pellets that we can use to make filament! It works great, prints great, and is otherwise almost equal to our normal PLA lineup. We follow the same quality guidelines with a minimum target of ±0.02mm. Color: Color will vary on this product. Color selection is unavailable. There are none that are equal to our standard colors. Packaging: All items comes vacuum-sealed with desiccant in SUNLU brand box Size: To keep this product simple, we only offer it only in 1.75mm 1kg spool Warranty: Since this is reprocessed product, made from out of spec material, we cannot guarantee this product for replacement. However, we will assist you if it has severe issues that should not have left our plant anyway. Compatibility: They should work in any printer that uses 1.75mm filament.

USD 99.99

Wood, PLA Rainbow, Silk Rainbow, ASA Special Filament 1KG

Wood, PLA Rainbow, Silk Rainbow, ASA Special Filament 1KG

Description① 【Special Filament】SUNLU special filaments, including wood color filament, marble texture filament, carbon fiber texture filament, glow-in-the-dark filament, flashlight filament and so on. Various kinds of special texture or color filaments different from regular filaments, bring different features to your products and eliminate the trouble of coloring.② 【Super Neat Filament Spool】SUNLU 3D printer filament product line is equipped with an excellent self-developed neat winding device, 100% neat rate, no clogs, making filament easier to use.③【1.75mm Filament Diameter】Dimensional Accuracy +/- 0.02mm. SUNLU filament has wide compatibility due to the small diameter error, making it suitable for almost all 1.75mm FDM 3D printers.④【Filament Spool Diameter】Spool Diameter: 8.00", Spool Width: 2.50", Spool Hub Hole Diameter: 2.20". The size of the SUNLU filament spool is suitable for hanging on a lot of FDM 3D printers.Parameter Material: Grow in Dark PLA(PLA Based)Wire diameter: 1.75/3.0MM Tolerance: ±0.02MMPrinting temperature: 200-210 ℃Substrate temperature: no heating needs to be coated with glue Heating 50-65 ℃ can not be coated with glueTensile force KGF: 11-16 (enterprise standard 23 ℃ wire diameter 1.75 mm)Melt index: 7-9g/10min (190℃,2.16Kg) (refer to GB/T 3682.1-2018)Elongation at break: 4% (enterprise standard 23℃, wire diameter 1.75 mm)Melting point: 165-180Heat distortion temperature ℃: 55Density g/cm³: 1.24Water Absorption %: 0.5Suggested printing speed: 50-100MM/sBubble: 100% zero bubbleNet weight: 1 KG/rollGross weight: 1.3 KG / rollLength: 1.75MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG)=330M, 3.0MM(1KG) 3.0MM(1KG)=110M Download SUNLU PLA Grow-in-Dark MSDS   SUNLU PLA Grow-in-Dark Data Sheet

USD 9.99

[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G

[Best Gift Choices] PLA, PLA Meta, SILK 3D Printer Filament 250G

Model: PLA filament 1.75mm Diameter Format: 1.75mmPrint Temp.: 205-215℃Tolerance: ±0.02mmPrint Speed: 50-100mm/sPlatform Temp: Depends on the platform: No need or 50-65℃N.W.: 0.25kgTensile Strength: 6-11kgfMelt Flow Rate: 7-9g/10min(200℃,2.16kg)Certificate: RoHS, Reach

USD 3.50

You May Also Like

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case Gongfu Teamaking goes back over 1000 years, originating in Chaozhou in Guangdong Province, China.   With a little practice, this technique of making tea in a lidded cup and filtering into a pitcher not only greatly improves the quality of the tea experience, but also can be a surprisingly relaxing and meditative hobby.    This set contains everything you need to get started, both for making tea yourself, and for friends. @yourteaguy SAmPLeS ArE HErE 🍵💥🍵 ##jessesteahouse ##tea ##teatok ##gongfutea ##teatime ##asian ##chinese ##culture ##exchange ##relax ##hobby ##茶 ##功夫茶 ♬ Lofi - Domknowz What's In The Case?   This set includes everything you need to make gongfu tea, including: 1) Tea Tray  Gongfu-style tea tray with slats that collects water and tea underneath for easy cleaning and disposal. It holds your tea equipment and gives your tea pets a place to live!   Clean and stylish, the top is made of sustainable bamboo; the bottom is made of white plastic.   2) Full 15-Piece Tea Set - A complete white ceramic tea set including: 1 Gaiwan (lidded cup) for brewing tea, gaiwan lid, and gaiwan saucer; 1 Ceramic filter with metal mesh, and ceramic filter-holder; 6 Tea cups, for serving many guests or for extras if you drop one! 1 Glass pitcher for holding the brewed tea; 1 Tea towel; 1 Set of wooden tongs. The gaiwan is 120 ml in size, which is perfect for brewing for 1-4 people.   3) FREE Tea Pet!   Tea pets are part of the Gongfu Tea tradition! They are small clay animals that live on the tea table and bring luck and auspiciousness. You "raise" your tea pets by pouring tea on them over the months and years.   Each set comes with a free random tea pet!  Bring Gongfu Tea Anywhere! The set comes in a beautiful carrying case, which is full of foam padding so as to protect your tea equipment even when you travel.    I film lots of videos around the country making tea, and I bring this travel set with me everywhere. It fits in a backpack for longer journeys, and it has a handle for toting to a friend's house. @yourteaguy Home away from home ##tea ##teatok ##jessesteahouse ##gongfutea ##gongfucha ##teaorange ##travel ##teatable ##airplane ##chinese ##asian ##culture ♬ Lofi - Domknowz Tea Table + Tea Sampler Combo Discount!   If you're just getting started, you'll need some teas as well!   My Gongfu Tea Sampler pack comes with eight(!) awesome teas and is a mini-tea collection in a box -- check out the sampler's product page! To get 25% off the tea sampler by buying it alongside the tea set, go to the top of the page and select the combo option from drop-down menu next to the product name. Jesse's Quality Guarantee！ When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 85.00

Jesse's Teahouse
Jesse's Teahouse