Name: Quartz Cap by Rogue Wax Works
Brand: VGoodiez
Price: 55 USD
Availability: InStock

USD 55.00

Description

All glass butane beast! The Quartz Cap is what you get when a Vapcap and a Vaponic have a baby! Load some herb in the stem put the cap on then heat it like a vapcap with a dab torch. Air is pulled up from the bottom and heated as it passes between the hot glass. It is a 70-30 conduction/convection mix. Please note these are the Quartz Caps with no handles! You get tongs to handle the quartz cap instead! Also includes handy stand for glass tube to cool in the optimal position. We love whole nugs stuffed in the tube and a blast for about 12-15 seconds with a Blazer Big Short GT8000 or similar but here is the manufacturer putting it to use! Demo Video:

VGoodiez discount code

You could save on VGoodiez Quartz Cap by Rogue Wax Works with a VGoodiez promo code:

10% off

81 uses

high

worked about 1 month ago

10% Off Select Items at VGoodiez

View all VGoodiez coupons and promo codes

16mm Coil - Stretched by Disorderly Conduction (Coil 5)

Coil used in the DC Elev8R, pretretched you just need to crimp the heater in. Please complete burnoff prior to use and let cool completely before shaping/installing the heater. Compatible with Disorderly Conduction, Auber and Cannabis Hardware PID system with five pin XLR connection. Other controllers may work but VGoodiEZ makes no guarantee. Coils are tested prior to shipment. 220V coils available upon request. Add in notes. Notes on Controller Options: Disorderly Conduction Micro- Made in the USA, the value workhorse. 3D printed enclosure takes up minimal space and is lightweight for travel. No frills basic design including hard on/off switch that works with smart plugs. Offers the widest temperature range as the coils and controllers are both manufactured by DC and the electronics are minimal. All controllers are offered in black color but other colors may be available for special order upon request. Just email sales@vgoodiez.com. Start this controller at 500 and adjust from there. Auber RDK300- Made in China, designed and sourced out of Georgia, USA. Nice metal enclosure with knob for temperature adjustments and auto shutoff feather. Has soft power switch so not workable with smart plugs. One of the most popular PID controllers out there, purchase this understanding you have both limitations and options to potentially improve your experience. In the past we didn't offer this with the DC Elev8R. Pre-boro filled heaters you needed to run 700+ degrees Fahrenheit and the electronics measuring the coil on the Auber didn't like it. The auber has a lot of electronic settings that can be tweaked to improve your experience but it can also cause issues with measuring a coil. Especially one that has been stretched or is potentially touching other metal. In the end you only need to run around 500F to get good rips with the DC Elev8R and this will do at least that without you having to make adjustments. You can probably get it to run hotter out of the box as well. One thing to note is the Cannabis Hardware Heat Post makes the coil reading act funny but it just works the same. You can also dive into menu and make further adjustments but please contact Auber directly for support. We can provide some manual links but not much else. Start this controller at 500 or higher- again you may see some temp fluctuations in the coil but it will work and rip hard. If you need it hotter you need to get into the menu.

USD 75.00