Tweco 600 Amp SMGC600 Magnetic Ground Clamp (9255-1062)
Welding Supplies from IOCWelding Supplies from IOC
4.0

Tweco 600 Amp SMGC600 Magnetic Ground Clamp (9255-1062)

USD 199.00

Description

The Tweco 600 amp switchable magnetic ground clamp is simple to use - just turn the knob. It's easy to operate and mounts on all surfaces. Turn the knob clockwise and you instantly have a secure grip. Perfect for flat and pipe applications. Available in 200, 300, and 600 Amp sized, these ground clamps are designed to save welders time and money. Sold individually. Quick Specs • 600 amp capacity • Dimensions - 2.6 in H x 2.83 in W x 4.09 in L • Weight - 2.0 lbs

Get a discount on Tweco 600 Amp SMGC600 Magnetic Ground Clamp (9255-1062)

You could save on Welding Supplies from IOC Tweco 600 Amp SMGC600 Magnetic Ground Clamp (9255-1062) with a Welding Supplies from IOC promo code:

    Welding Supplies from IOC logo

    $100 off

    70 uses
    high

    worked 3 months ago

    $100 Off Storewide (Minimum Order: $3000) at Welding Supplies from IOC
View all Welding Supplies from IOC coupons and promo codes

More Welding Supplies from IOC Products

CK Worldwide 9 Series Superflex TIG Torch w/Rigid Head (CK9-XX-RSF RG)

CK Worldwide 9 Series Superflex TIG Torch w/Rigid Head (CK9-XX-RSF RG)

The CK 9 series air cooled TIG torches are a smaller alternative to the larger 17 series torches. These torches are constructed with a hardened brass alloy head to reduce thread damage which also helps prevent galling and seizing of the collet body. CK torches have the largest metal head insert and this insures maximum cooling and longer life. The CK torches equipped with the Superflex cables are the lightest, most flexible cable assemblies available on the market. The silicon rubber hose connection with a nylon over-braid resists abrasion and stays flexible even in cold environments. The 9 series torches are rated up to 125 amps and accept CK 2 series (13N) consumables. This particular model torch includes a rigid/stiff head, but does Not include a gas shut-off valve. Please allow 2-3 days for shipping. Features • Capacity - 125 amps • Duty cycle - 100% @ 125 amps • Length - 7-1/2 in • Weight - 2-3/4 oz • 1-piece Superflex cable assembly • More efficient heat dissipation • Hardened brass head • Air-cooled • Made in USA

USD 85.00

Miller Maxstar 200 DX TIG Welder (903701011)

Miller Maxstar 200 DX TIG Welder (903701011)

When the job demands greater control, pick the Miller MaxStar 200 DX TIG Welder. The 200 DX provides pulse on/off, pulse frequency, a higher duty cycle, background amps, initial amps, initial slope time, final slope time, and final amperage control. Wireless Remote Control Compatible Improve productivity, eliminate clutter and cord tangles in the work area. Eliminate cord failure and associated downtime/repair costs and extend the operator's welding range without adding cord extensions. Lift-Arc Lift-Arc starting provides x-ray clean welds in AC or DC arc starting without the use of high frequency. Stick Features (DC) Tailored arc control (DIG) allows the arc characteristics to be changed for specific applications and electrodes. Smooth running 7018 or stiffer, more penetrating 6010. Hot Start Adaptive control provides positive arc starts without sticking. Low OCV Stick Low OCV Stick is a simple design that reduces open-circuit voltage to 5-10 VDC when power source is not in use. This built-in circuit design eliminates the need for add-on voltage reducers. Blue Lightning High Frequency Arc Starter For more consistent non-contact starts and greater reliability compared to traditional HF arc starters. Auto-Line Power Management Technology Allows for any input voltage hookup (115-460 V) with no manual linking, providing convenience in any job setting. Ideal solution for dirty or unreliable power. DC TIG Features DC TIG provides exceptionally smooth and precise arc for welding exotic materials. Comes complete with: • Maxstar 200 DX power source • Quick Reference Guide: English | Spanish • 8 ft (2.4 m) primary cord • DVD set-up video • (2) Dinse 50 mm connectors • Air-cooled torch adapter (195378) • Adjustable shoulder strap

USD 2615.00

Miller Digital Elite Raptor Welding Helmet w/ClearLight 4X Lens (296773)

Miller Digital Elite Raptor Welding Helmet w/ClearLight 4X Lens (296773)

The Miller Digital Elite Series Helmet with ClearLight 4X Lens Technology offers up to four times the clarity compared to welding helmets with a 1/1/1/1 rating. The digital elite is the professional's choice for the ultimate Welding Helmet offering four modes of digital versatility for most welding and cutting applications. Improved digital controls allow you to easily adjust the mode and settings. The redesigned headgear offers additional adjustability settings for better fit and comfort. A large 9.22 sq. in. viewing area has four arc sensors for superior lens response. This helmet features Miller's "ClearLight 4X" lens technology. The ClearLight 4X technology provides the most advanced high-definition optics for the most realistic view that's clearer and brighter before, during, and after every weld. In a blind study, 70% of users chose the 4X lens over all others. • InfoTrack 2.0 - tracks and displays arc time and arc count.• AutoSense - reduces issues related to setting helmet sensitivity by allowing the welder to push and hold the AutoSense button to automatically set the helmet sensitivity for their environment. • Four Arc Sensors and Four Modes - weld, cut, grind, and X-mode. X-Mode electromagnetically senses the weld to reduce sunlight interference and continuously detects the arc even if sensors are blocked.• Digital Controls - easily allow welder to make precise lens adjustments to shade, delay, and sensitivity.• Memory Function - for easy switching between two preset customized memory settings.• Half-Shade Settings - for precise lens adjustment. • Legacy Headgear - designed for unsurpassed comfort and stability for all-day wearability.• 4 Year Lens Warranty • Viewing Area – 9.2 sq in. 3.85 x 2.38 sq. in (97 x 60 mm)• Four Arc Sensors – 1/ 25,000 sec. lens speed• Four Operating Modes; Weld Mode (8-13), Cut Mode (5-8), Grind Mode (Light State 2.5), X-Mode (can be used in Shades 8-13)• Sensitivity and Delay Control - .10 – 1.0 sec• TIG Rating - 5 Amps and below• Lithium batteries (2) – with solar assist; up to 3,000 hours• Weight - 17.5 oz (495g)• Meets ANSI Z87.-2003 (High Impact) standard Included:• 5 outside cover lenses• 2 inside cover lenses• Helmet bag

USD 355.00

Miller Millermatic 142 MIG Welder (907838)

Miller Millermatic 142 MIG Welder (907838)

If you're looking for a high-quality yet affordable Miller 120V MIG Welder, look no further than the Millermatic 142. The American-made Millermatic 142 welder is loaded with features and so easy to set up that you'll be welding in no time!Auto-Set:A breakthrough control that automatically sets your welder to the proper parameters. Auto-Set offers all-in-one MIG minus the hassle of finding parameters. Simply set the wire diameter and material thickness, and start weldingManual Mode:Gives you the flexibility to manually set the machine when welding aluminum, stainless steel, or any time you want to set custom parameters on mild steel.Angled All Aluminum Drive System:Robust wire drive with Quick Select drive roll and calibrated tension knob creates consistent feeding and easy setup for up to 15-foot MIG guns.Quick Select Drive Roll:Makes setup quicker by offering three grooves - two for different-sized solid wire and a third for flux-cored wire.120V Input Power:This Miller 120V welder uses 120V household input power, so there are no special power requirements. Flexible to use in any location!Smooth-Start:This technology provides a smooth, spatter-free start. The Miller 142 welder is the best entry-level machine in the 120V MIG category! No more pop-gun starts or spatter to clean up.Auto Spoolgun Detect:Automatically detects when a MIG gun or spool gun is connected eliminating the need for a switch.Thermal Overload & 'Tip Saver' Short Circuit Protection:Shuts down the unit and activates the over-temperature light if the airflow is blocked or the duty cycle is exceeded. Tip Saver shuts down output when the tip is shorted, extending tip life and protecting internal components from damage.Comes Complete with:• 142 MIG Power Source• 10ft (3m) MDX 100 MIG Gun & Cable Assembly (Accepts Miller MDX Consumables)• 6.5ft (2 m) power cord with plug• 10ft (3m) work cable with clamp• Argon and AR/CO2 mix flow gauge regulator with gas hose• Hobart spool of .030 inch (0.8mm) solid wire• Two contact tips for .030 inch (0.8mm) wire• Quick Select drive rolls for .024 inch (0.6mm) or .030/.035 inch flux-cored wire• Material thicknes gauge (229895)• Velco cord wraps (229895)

USD 1079.00

You May Also Like

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case

Jesse's Gongfu Tea Tray Set & Carrying Case Gongfu Teamaking goes back over 1000 years, originating in Chaozhou in Guangdong Province, China.   With a little practice, this technique of making tea in a lidded cup and filtering into a pitcher not only greatly improves the quality of the tea experience, but also can be a surprisingly relaxing and meditative hobby.    This set contains everything you need to get started, both for making tea yourself, and for friends. @yourteaguy SAmPLeS ArE HErE 🍵💥🍵 ##jessesteahouse ##tea ##teatok ##gongfutea ##teatime ##asian ##chinese ##culture ##exchange ##relax ##hobby ##茶 ##功夫茶 ♬ Lofi - Domknowz What's In The Case?   This set includes everything you need to make gongfu tea, including: 1) Tea Tray  Gongfu-style tea tray with slats that collects water and tea underneath for easy cleaning and disposal. It holds your tea equipment and gives your tea pets a place to live!   Clean and stylish, the top is made of sustainable bamboo; the bottom is made of white plastic.   2) Full 15-Piece Tea Set - A complete white ceramic tea set including: 1 Gaiwan (lidded cup) for brewing tea, gaiwan lid, and gaiwan saucer; 1 Ceramic filter with metal mesh, and ceramic filter-holder; 6 Tea cups, for serving many guests or for extras if you drop one! 1 Glass pitcher for holding the brewed tea; 1 Tea towel; 1 Set of wooden tongs. The gaiwan is 120 ml in size, which is perfect for brewing for 1-4 people.   3) FREE Tea Pet!   Tea pets are part of the Gongfu Tea tradition! They are small clay animals that live on the tea table and bring luck and auspiciousness. You "raise" your tea pets by pouring tea on them over the months and years.   Each set comes with a free random tea pet!  Bring Gongfu Tea Anywhere! The set comes in a beautiful carrying case, which is full of foam padding so as to protect your tea equipment even when you travel.    I film lots of videos around the country making tea, and I bring this travel set with me everywhere. It fits in a backpack for longer journeys, and it has a handle for toting to a friend's house. @yourteaguy Home away from home ##tea ##teatok ##jessesteahouse ##gongfutea ##gongfucha ##teaorange ##travel ##teatable ##airplane ##chinese ##asian ##culture ♬ Lofi - Domknowz Tea Table + Tea Sampler Combo Discount!   If you're just getting started, you'll need some teas as well!   My Gongfu Tea Sampler pack comes with eight(!) awesome teas and is a mini-tea collection in a box -- check out the sampler's product page! To get 25% off the tea sampler by buying it alongside the tea set, go to the top of the page and select the combo option from drop-down menu next to the product name. Jesse's Quality Guarantee！ When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 85.00

Jesse's Teahouse
Jesse's Teahouse