110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks
Wolf ToothWolf Tooth
4.0

110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks

USD 84.95

Description

Wolf Tooth was first to market with cyclocross 1x specific chainrings because we saw cyclocross as the perfect use for our patent pending Drop-Stop® technology. These beautifully machined 110 BCD asymmetric 4-bolt chainrings are optimized for your 1x Shimano CX / road / gravel drivetrain whether you run Dura Ace 9000, Ultegra 6800, 105 5800, or Tiagra 4700. They are also offset for the ideal 1x chainline. Fits 110 BCD Asymmetric 4-bolt Shimano cranks Drop-Stop technology. On Wolf Tooth’s patented wide/narrow chainring, the wide side of the tooth has maximum contact on the drive side which spreads the load and improves chainring life. The narrow side allows clearance for mud and debris which reduces friction. Alternating wide/narrow tooth pattern prevents chain derailment Compatibility Fits 110 BCD asymmetric 4-bolt cranks All sizes compatible with Dura Ace 9000, Ultegra 6800, 105 5800, RS510, Tiagra 4700 or 4703, Sora R3000 or R3030, and Claris R2000 or R2030 cranks. 38-50t are compatible with 105 R7000, Ultegra R8000, and Dura-Ace R9100.  The 36t chainring is NOT compatible with these cranks. NOT compatible with Dura-Ace R9200, Ultegra R8100, and 105 R7100 Cranks Size 42t and larger will work with the Dura Ace 9100 power meter  Mounts in the big ring position of the cranks but is offset inward for perfect chainline. The stock 2x bolts will not work. You will need our 6mm bolts which are optimized for single ring mounting. If using a 9-speed drivetrain use a 10-speed chain. It fits tighter for better chain retention Chainline  47.5mm Recommendations   Recommend the use of a clutch style rear derailleur for the best chain security. If you plan to ride in very muddy conditions, we recommend a chainguide or chainkeeper in addition to a clutch-type rear derailleur. Without these precautions, you may experience chaindrops and/or chainsuck.   Related Products Chainring bolts - the stock 2x bolts will not work. You will need 6mm bolts which are optimized for single ring mounting Tanpan - allows Shimano mountain bike rear derailleurs to be used with Shimano road shifters RoadLink - allows for wide range cassettes to be used with Shimano road rear derailleurs Tech Specs Material: 7075-T6 aluminumWeight: 38t • 66g  |  40t • 74g  |  42t • 81g  |  44t • 90gMade in the USA Patent and trademark information

Try this code on 110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks

You could save on Wolf Tooth 110 BCD Asymmetric 4-Bolt Chainrings for Shimano Cranks with a Wolf Tooth promo code:

    Wolf Tooth logo

    15% off

    5 uses
    high

    worked 6 months ago

    Save 15% off with code
View all Wolf Tooth coupons and promo codes

More Wolf Tooth Products

Aero Direct Mount Chainring for SRAM 8-Bolt Gravel / Road Cranks

Aero Direct Mount Chainring for SRAM 8-Bolt Gravel / Road Cranks

Designed for gravel and road racing, and for those looking to optimize each detail in pursuit of speed, Wolf Tooth Aero Chainrings are strong, lightweight, and profiled to mate perfectly with your crankset for a clean, integrated look. Taking advantage of 1x drivetrain systems and wider-range rear cassettes, Aero Chainrings are available in sizes 46T to 52T to provide similar overall range to standard 2x drivetrain configurations. They feature our patented Drop-Stop® design for the best wear life, chain retention, and mud clearance. Drop-Stop B is optimized for SRAM Eagle and Flattop chains. Aero Direct Mount Chainrings for SRAM 8-Bolt Cranks replace your existing spider and chainring with one clean looking, lightweight, and stiff piece of machined billet.  Compatibility  These direct mount chainrings will replace your existing chainring and spider or replace the direct mount chainring for SRAM AXS cranksets and other cranks that use the 8-bolt mounting standard. SRAM Direct Mount DUB road cranksets use the 8-bolt mounting standard. Any of those cranksets with a removable spider also use the 8-bolt mount. Compatible with SRAM 12-speed and 13-speed groupsets including SRAM Red XPLR AXS. Wolf Tooth’s patented Drop-Stop® wide/narrow tooth profile for the ultimate chain retention and mud-shedding ability. Chainline is 45mm on standard spindle cranks and 47.5mm on wide spindle cranks for 46-52T chainrings. Chainrings are designed for 1x drivetrains. They are not compatible with 2x drivetrains.   Recommendations Recommend the use of a clutch-style rear derailleur for the best chain security For Installation, use the included custom T20 bolts. Torque to 4Nm with a T20 bit. Related Products LoneWolf Aero Chainguide Aero Chainrings for SRAM AXS 107BCD Power Meter Direct Mount Chainrings for SRAM 8-Bolt Smaller Sizes Replacement Bolts for SRAM 8-Bolt Direct Mount chainrings and spiders Tech Specs Weights:   46T • 133g  |  48T • 144g  |  50T • 155g  |  52T • 166gMaterial: 7075-T6 aluminum Included: Set of eight custom T20 stainless steel boltsMade in the USA  Patent and trademark information

USD 124.95

Wolf Tooth Premium Headsets – Espresso

Wolf Tooth Premium Headsets – Espresso

Wolf Tooth headsets are machined here in our Minnesota shop with aircraft-grade 6061 aluminum. They are designed to be lightweight, strong, and durable. Our headsets have three levels of industry-leading custom sealing to protect bearings from the elements and prolong the life of the headset. Available in a variety of colors. These ZS headsets are for frames with internal bearing cups that are pressed into the frame. Premium Headsets with Enduro stainless steel bearings have a lifetime warranty. Compatibility Any frame that uses ZS (Zero Stack) headsets with 44mm upper and 56mm lower head tube inner diameter. Uppers and lowers sold together as a set. Enduro stainless steel sealed bearings included on both the upper and lower. Upper headsets ship with a star nut which can only be used on forks with steel or aluminum steerer tubes. For forks with carbon steerer tubes you will need a compression plug (sold separately). (Never use a star nut on a carbon steerer tube). Upper assembly features: Ultralight stem cap with integrated spacer plus an aluminum bolt and a star nut. 6 mm stack height top cover only O-ring seal prevents water intrusion around steerer tube. Custom-molded upper lip seal provides additional protection for upper bearing. Lower assembly features: Custom-molded dual-lip seal on the crown race protects lower bearing in the toughest conditions. All components precision machined in-house at Wolf Tooth from aircraft grade aluminum to ensure the highest level of quality. Service and additional parts available. Recommendations The Wolf Tooth crown race installation adapter will help avoid damaging the crown race seals. Related Products Precision headset spacers Wolf Tooth crown race installation adapter Performance ZS Headset Tech Specs Weight: 55-58gMaterial: 6061 aluminum Bevel Angle: 36 x 45 degrees Stem Cap Bolt Torque Spec: 2-3 Nm with light grease on threads only Made in the USA Patent and trademark information

USD 129.95

Seatpost Clamp Titanium Bolt Hardware Upgrade Kit

Seatpost Clamp Titanium Bolt Hardware Upgrade Kit

At the heart of the seatpost clamp is our custom self-aligning bolt and anchor. Our aluminum seatpost clamps are assembled with steel hardware. The Seatpost Clamp Titanium Bolt Hardware Upgrade Kit replaces the bolt and hardware that comes assembled with our seatpost clamp; this kit does not include an aluminum seatpost clamp. Titanium hardware is available in three colors and weigh 50% less than steel bolts.  The M5 titanium bolt includes a spherical washer and mates with a cylindrical anchor barrel. This means that threads are always perfectly aligned, preventing binding and ensuring consistent clamping force. 6.5cc Packet of Finish Line Ti-Prep Anti-Seize Assembly Lube is included.  Compatibility Made to be used with Wolf Tooth Seatpost Clamps Related Products Color Accents Seat Post Clamp Seat Post Clamp Quick Release   Tech Specs Weight:  4.9g Quick Release  |  4.3g bolt closure  Torque spec:  6 Nm Max Includes:  Bolt, Threaded Barrel, and Ti-Prep Grease Tool interface:  4mm hex key Material: Titanium Patent and trademark information

USD 14.95

Waveform Aluminum Pedals

Waveform Aluminum Pedals

Wolf Tooth Waveform Aluminum Pedals are designed for all-mountain riding, from XC to downhill. The pedals come in two sizes, and are proportionally scaled to provide a supportive platform, shaped to match the footprint of your shoe. They have a slim, dual-concave profile that is 14mm thick at the perimeter and just 12.5mm thick in the center, cradling your foot for optimal pedal feel. Each side of the pedal has 11 stainless steel rear-loading pins for loads of traction. The design also features a large, tapered leading edge to deflect pedal strikes on rough terrain. A custom radial seal protects three fully sealed cartridge bearings for low-friction riding in all conditions.  Two sizes: Large is 112mm x 106mm, small is 105mm x 99mm Three high-precision, low-friction sealed bearings designed specifically for this pedal, with one igus bushing Custom radial seal to protect internal hardware from water, dirt, and trail debris Eleven stainless steel, rear-loading 4.5mm pins per side Dual Concavity secures your feet firmly in place on the pedals, both front-to-back and side-to-side Tapered leading edge deflects pedal strikes. Available in eight colors Recommended Apply WT-G Precision Bike Grease to the pedal threads before installing pedals on crankarms. Pins can be removed for desired grip by using a 3mm hex tool. Includes six extra grip pins. More pins are available on the replacement parts page. See i nstallation instructions for recommendations on installing pins. Compatibility Fits all cranks with 9/16-20 tpi right- and left-hand threads – some kid’s bikes and vintage bikes may have smaller incompatible threads. Related Products Waveform Pedals Replacement Parts Waveform Pedal Pins WT-G Grease Crankskins Crankarm Protectors Tech Specs User Manual and Service Guide Warranty Waveform Pedal Replacement Parts Waveform Pedals Factory Service Weight: Large set 384g  |  Small set 373g Size (length x width): Large: 112mm x 106mm  |. Small: 105mm x 99mmPin Height: 4.5mmMaterial: Platform: 6061-T6 Aluminum; Axle: 17-4 PH Stainless Steel; Pins: 304 Stainless SteelMade in the USA Patent and trademark information

USD 199.95

You May Also Like

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set

Two-Cup Travel Teapot Set This two-cup and teapot combo packs light for travel and looks beautiful on a desk at home or at work. The set features: One teapot, complete with lid and built-in filter; Two nicely-sized cups that fit snug on top and bottom of the pot; Carrying case for travel and storage; Circular wooden button-style handles; Small rectangular tea towel. When I worked in Beijing at the Nature Conservancy, I saw a lot of office workers would keep a cup-pot combo on hand so they could brew great tea without cluttering up their work space. Needless to say, I got one myself too. It’s a great fit for: Home-office tea-making; Picnic/travel tea-making; Tea friends with less space for storing tea equipment; Tea Party Size? This set is best for personal use or with one partner (1-2 people).   @yourteaguy Would you the cup pot combo? #tea #teatime #celtics #basketball #teapot #happytime #jessesteahouse ♬ Pieces (Solo Piano Version) - Danilo Stankovic       Save on tea with this teapot! Purchase the pot and sampler combo from the drop-down menu above to save $5 on a tea sampler! Jesse’s Review: This cup-pot combo is straight-up a great way to make tea. It’s very practical and yet the results are still top-tier. If you don’t have the space, time, or energy for a full Gongfu-style tea set, this is for you. I keep one of these on my desk at home in case I need to really get work done and can’t do the whole tea ceremony, and I also have a second set just for traveling and taking to friends’ houses. One note - because this set doesn’t come with a pitcher, you need to be sure to only add as much water as you need to drink your next cup. Otherwise, you will be left with extra tea inside the pot which keeps over-steeping. Don’t Forget Your Tea Pets! It’s not gongfu tea time without a tea pet! Check out the tea pets and add one to your order!   Jesse's Quality Guarantee! When I started this shop, I wanted to find a way to take care of tea friends in a way normal online shops wouldn't.   That's why I will replace any defective items for free. Simply contact teafriendsupport@jessesteahouse.com if you have issues.   I also highly recommend buying shipping insurance with your order - for a few dollars, we will cover any breakages, losses, and package theft 100%!   I take care of my tea friends! I hope you will keep coming back!

USD 40.00

Jesse's Teahouse
Jesse's Teahouse