Grizzly Industrial Promo Codes and Coupons September 2025

Grizzly Industrial

Grizzly.com is a leading industrial machinery and tools retailer, specializing in woodworking equipment, metalworking tools, and power tools. Founded in 1983, they offer a wide selection of both consumer and professional-grade equipment, along with parts, accessories, and technical support.

grizzly.com

Today's Grizzly Industrial discount codes

TOP PICK

5% off

2 uses

medium

worked 6 months ago

Score 5% off with coupon code on $50+ orders

10% off

3 uses

medium

worked 6 months ago

Save 10% off with promo code on $50+ orders

5% off

2 uses

medium

worked 6 months ago

Save 5% off with discount code on $50+ orders

5% off

1 uses

medium

worked 6 months ago

Get 5% off with coupon code

Featured Grizzly Industrial Products

6 Gal Twin-Cylinder Oil Free Pancake Compressor

T33858 Quiet Series 6-Gallon Pancake Air Compressor A lightweight and quiet air compressor, ideal for hobbyists and small workshops. At 1-1/2 HP this air compressor can power air tools such as brad nailers and staplers, and even inflate tires. And at 3.5 SCFM it only draws 9 amps, requiring less electricity than many other compressors! It features an oil-free, twin-cylinder pump, which gives you more airflow and consistent pressure than single-cylinder pumps. This allows the 6-gallon tank to recover more quickly so you can power your tools on demand. The twin cylinders also run much quieter than a single cylinder. At just 62 dB this compressor runs about as loud as a normal conversation. And oil-free operation makes this compressor even simpler to use. It's practically maintenance-free! Rust and corrosion are minimized with a ball-valve drain control that quickly gets rid of condensation. This versatile compressor is easy to transport to wherever you need it, and it won't take up much space in your truck bed or garage. The Grizzly Customer Service and Technical Support Teams are U.S.-based. To order parts or for other services and inquiries, contact Mega Compressor at (832) 415-6995. SPECIFICATIONS: Motor: 1-1/2 HP, 120V, single-phase, 12A Maximum air pressure: 150 PSI Maximum airflow: 3.5 SCFM at 90 PSI Tank size: 6-Gallon Sound rating: 62 dB Overall size: 16" W x 16" D x 20-1/2" H Approximate shipping weight: 56 lbs. FEATURES: Oil-free twin-cylinder pump for quiet operation and increased air flow Ball-valve drain control for eliminating condensation Air regulator for airflow adjustment Two quick-coupler hose connections 1-year limited warranty

USD 221.00

16" x 46" Wood Lathe with DRO

G0462 16" x 46" Wood Lathe with DRO A deluxe turning machine at a very competitive price! The G0462 16" x 46" Wood Lathe with DRO can swing 16" over the bed, comes with a 2 HP motor and sports a digital readout for spindle RPM. Changing speeds is easy with the shift-on-the-fly speed control lever and there are no belts to mess with. The speed can be changed between 600 and 2400 RPM. Outboard turning is a snap too, just loosen the headstock and swivel it up to 180° for total flexibility. The solid cast-iron construction throughout ensures smooth and stable operation. If you want to add more storage place, the legs feature shelf supports so you can add your own custom-built shelf. If not required by any local codes, fastening the machine to the floor is an optional step. If you choose not to do this with your machine, we recommend placing it on mounts such as the G7159 Leveling Feet, as these provide an easy method for leveling and they have vibration-absorbing pads. The G0462 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual provides full instructions on how to assemble and maintain your lathe. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 2 HP, 110V, single-phase, 14A Swing over bed: 16" Swing over tool rest: 12" Distance between centers: 46" Spindle taper: MT#2 Spindle thread size: 1" x 8 TPI RH Tailstock taper: MT#2 Spindle speeds: Variable, 600-2400 RPM Headstock rotation: 0°, 60°, 90°, 120°, and 180° Tool rest width: 11-3/4" Tool rest post length: 3" Tool rest post height: 2-1/8" Overall dimensions: 72-1/2" W x 19" D x 48"H Approximate shipping weight: 354 lbs. FEATURES: Digital readout for spindle RPM 0°, 60°, 90°, 120°, and 180° headstock rotation Quick lock/release levers for tailstock and headstock Heavy-duty, precision-ground cast-iron bed and legs ensures stability and minimize vibration 1-year limited warranty INCLUDES: 6" faceplate Cup live center Spur center Need help? We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.

USD 922.00

Bull Nose Bit, 1/4" Shank, 3/4" Dia.

Grizzly® cutters feature top-quality carbide - the best available for wood cutting applications. Shaped and sharpened with diamond wheels as fine as 600 grit, these outstanding router bits are constructed with a high-tensile, silver-based brazing material, which offers the utmost in strength and durability, If you haven't tried these premium bits, we strongly suggest you put them to the test. Manufactured in an ISO 9001 approved factory! Used for full beading and rounding edges, particularly for casement and staircase work. Also used for moulding and picture frames or anywhere a round is needed. Especially attractive on countertops. Features an anti-friction coating. Dimensions: Cutter Diameter: 1-1/4"Cutting Length: 1-1/16"Overall Length: 2-1/4"Bead Diameter: 3/4"Maximum RPM: 18,000

USD 14.87

3/4" Bull Nose 1/2" Shank

These bits will create a full bead or a full round edge. Excellent for casement and staircase work.

USD 14.46

What Grizzly Industrial coupons are available today?

We track so many discount codes. Read about today's Grizzly Industrial coupon statistics.

Grizzly Industrial deals available today

Active Grizzly Industrial codes

5% off

Biggest discount available

Get the best Grizzly Industrial promo codes and coupons that actually work. Our community of sustainability minded shoppers helps you save by testing and sharing:

Verified promo codes with live success rates from recent shoppers!
Exclusive single-use codes shared by our community (48 active codes).
Drop alerts when Grizzly Industrial's most popular items go on sale!
Deals for those who want extra savings opportunities
Insider savings tips from experienced Grizzly Industrial shoppers who know the best deals.

Why TerraCoupons finds better Grizzly Industrial discounts:

Live success tracking: See exactly which codes are working for other shoppers right now
Real-time feedback: Every code attempt is tracked and ranked to show you the best options first
Sale predictions: Get alerted when Grizzly Industrial's next big discount event is coming
Exclusive savings: reseller discounts, shopping tips and sustainability tips you won't find elsewhere

Note: Our community tests every Grizzly Industrial promo code and shares results in real-time. Check success rates and shopping tips in the activity feed to find what works best for your purchase.

5% off

4 uses

medium

worked 6 months ago

Take 5% off with code on $50+ orders

5% off

3 uses

medium

worked 5 months ago

Save 5% off with discount code on $50+ orders

25% off

3 uses

medium

worked 5 months ago

Take 25% off with discount code

5% off

1 uses

medium

worked 5 months ago

Save 5% off with discount code on $50+ orders

More Grizzly Industrial Products

8" x 13" Variable-Speed Benchtop Wood Lathe

T32536 8" x 13" Variable-Speed Benchtop Wood Lathe A great entry-level wood lathe for turning bowls and spindles up to 13" long. The Grizzly T32536 8" x 13" Benchtop Wood Lathe offers the precision and control that pen turners and miniature hobbyists demand. The T32536 features cast-iron construction, a 5-3/4" faceplate, 8" of swing over the bed, and 13" of distance between centers. This lathe comes with two interchangeable 4-1/4" and 7" tool rests. When in use, either tool rest will lock into a sturdy, quick-adjust base to maximize support where cutting occurs and minimizes leverage. The tailstock has an MT#1 taper, fine adjustment knob, and is equipped with a cam-action clamping system allowing it to be positioned anywhere along the bed with ease. Easily adjust the variable-speed range between 750-3200 RPM with the twist of the spindle speed dial. Extra-large knurled spindle and tailstock knobs help provide an ergonomic grip for manually rotating your workpiece and changing out centers. Like all Grizzly lathes, the T32536 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. (Consumables are not covered by the warranty.) The T32536 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your lathe. Parts for the lathe may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory ETL certified SPECIFICATIONS: Motor: 1/3 HP, 120V, single-phase, 4A Swing over bed: 8" Swing over tool rest base: 5" Distance between centers: 13" Floor to center height: 9-3/4" Spindle speed: Variable, 750–3200 RPM Spindle threads: 3/4" x 16 TPI RH Spindle taper: MT#1 Tailstock taper: MT#1 Footprint: 23-1/2" x 5-1/2" Overall dimensions: 29" W x 10-1/2" D x 13" H Approximate shipping weight: 52 lbs. FEATURES: Safety paddle switch with removable key Knurled headstock and tailstock knobs for added grip Variable-speed spindle Precision-ground cast-iron bed Right hand spindle 3/4" x 16 TPI INCLUDES: MT#1 spur center MT#1 live center 4-1/4" and 7" tool rests 5-3/4" faceplate Need help? We offer U.S.-based customer service and technical support to get your questions answered and help keep your equipment running in top condition.

USD 268.00

6" x 20" 3/4 HP Mill/Drill

G0758 6" x 20" 3/4 HP Mill/Drill With a high-torque but quiet motor, this versatile mill/drill is ready to be a key player in your shop. Drawing from the heritage of producing previous mill/drills, the G0758 6" x 20" Mill/Drill comes packed with impressive features. The 3/4 HP motor powers the variable-speed spindle control from 50 to 2000 RPM and is displayed on a DRO. Tracking spindle depth is as easy as reading a separate DRO with inch/mm display and zeroing function. Additionally it has super-rigid precision-ground dovetail headstock column and table ways, coarse and fine spindle downfeed, and precision handwheel control for X, Y, and Z-axis. If that is not enough, this fiesty champ has one of the largest tables, table travel, and motor sizes in its class, allowing it to take on a huge range of workpiece sizes. With its R-8 spindle taper, it can also make use of a wide variety of tooling. The head is equipped with a special shifter knob that allows you to drop power-transfer gearing down for maximum torque in the lowest RPM range. Shown with optional T26612 stand and chip tray. Like all Grizzly Mills, the G0758 comes with a 1-year limited warranty. The G0758 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill drill. The Grizzly Customer Service and Technical Support Teams are also U.S.-based. Parts for the drill press may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 3/4 HP, 110V, single-phase, 10A Spindle taper: R-8 Spindle speeds: Variable, 50–1000 RPM low, 100–2000 RPM high Max distance spindle-to-column: 6-5/8" Max distance spindle-to-table: 8-3/4" Spindle travel: 2" Drilling capacity: 1/2" mild steel Head travel: 8-1/4" Column tilt: 45° left/right Table size: 5-3/4" x 19-3/4" T-slots: 3 @ 1-1/2" centers, 3/8" wide Longitudinal travel: 13-1/8" Cross travel: 5-1/2" Overall dimensions: 19-3/4" W x 21" D x 30-1/4" H Approximate shipping weight: 204 lbs. FEATURES: Dovetail head column and table ways High-torque, low-noise DC motor Variable-speed spindle with DRO Spindle elevation DRO 3-Axis precision handwheel control Coarse and fine spindle downfeed 2-Speed gearbox Zero-setting dials on handwheels INCLUDES: 3–16mm B16 drill chuck Drill chuck arbor B16 x R8 Open-ended and hex wrenches Toolbox

USD 1723.00

8" x 29" 2 HP Mill/Drill with Stand

G0705 8" x 29" 2 HP Mill/Drill with Stand A competitively priced mill worthy of being the cornerstone of your shop. The G0705 8" x 29" 2 HP Mill/Drill has a 2 HP motor and enough table space to make quick work of just about any machining job you can throw at it. The G0705 features an R-8 spindle and includes an R-8 drill chuck arbor and MT#3 drill chuck. Included are two adapters that will allow the use of MT#3 and MT#2 tooling. With the cabinet in the stand, you'll have the convenience of storing everything right where you need it most! You can use the savings against the competition towards the G1076 1/2" Clamping Kit or even the G7155 Premium 6" Milling Vise. Like all Grizzly mills, the G0705 comes with a 1-year warranty which covers parts and assures the unit is free from factory defects. The G0705 manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The complete and easy-to-read manual makes it easier to assemble and maintain your mill. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts and accessories for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 2 HP, 110V/220V* (prewired 220V), single-phase. 17.8A/8.6A Minimum circuit size: 20A @ 120V, 15A @ 240V Swing: 15-1/2" Spindle travel: 4-11/16" Spindle taper: R-8 Spindle speeds:12, 140–2436 RPM Quill diameter: 2.95" Max spindle to table: 17-5/16" Table travel (longitudinal): 19-11/16" Table travel (cross): 7-1/2" Table size: 8-1/4" x 28-3/4" T-Slots: 3 @ 2-1/2" centers, 5/8" wide Drilling capacity for cast-iron: 1-3/16" Drilling capacity for steel: 1" Overall dimensions: 41-5/8" W x 40-1/2" D x 43-1/4" H Approximate shipping weight: 750 lbs. FEATURES: Calibrated depth stop Fine feed downfeed control, graduated in 0.001" Coolant trough Variable-speed longitudinal power feed Quill moves 0.108" per revolution of fine feed handwheel Table moves 0.100" per revolution of handwheel *This machine is prewired for 220V. 110V operation requires installation of the P0705311 110V Conversion Kit. For your own safety, all wiring procedures MUST be completed by an electrician or other qualified service personnel. See Owner’s Manual for details.

USD 2905.00

4" x 16" Mini Milling Machine

G8689Z 4" x 16" Mini Milling Machine An ideal benchtop milling machine for the home hobbyist. The G8689Z 4" x 16" Mini Milling Machine can power through up to 1/2" drilling, 1/2" end mills, and 1" facing for the consistent results you need. This benchtop mill features the highly stable R8 spindle that offers versatility, quick and easy tool changes, and exceptional accuracy. The variable-speed control and gear drive save you time and hassle as you switch between projects. The G8689Z has two speed ranges: low range 0–1100 RPM, and high range 0–2500 RPM. Modify the spindle height with the rapid downfeed, or use the micro downfeed to adjust down to 0.001" (one full revolution is 0.060"). The headstock adjusts up and down the column and tilts 45° left or right relative to the table, and adaptable dovetail ways offer precision and rigidity. You can set the limit block to restrict the amount of head travel for repeated drilling of the same depth. This mini milling machine also includes a clear chip guard on the spindle and a rubber chip guard on the ways for safety. Like all Grizzly mills, the G8689Z comes with a 1-year limited warranty. The G8689Z manual was written by our U.S.-based Technical Documentation Department and is packed with useful information. The Grizzly Customer Service and Technical Support Teams are U.S.-based. Parts for the mill may be available online and shipped from the Grizzly parts warehouse in Springfield, MO. Made in an ISO 9001 factory SPECIFICATIONS: Motor: 1/2 HP, 110V, single-phase, 4.5A Spindle taper: R-8 Spindle speeds: Variable, 0-1100 and 0–2500 RPM Maximum distance spindle to table: 10-1/2" Maximum distance spindle-to-column: 6-3/8" Table size: 15-3/4" x 3-5/8" T-slots: 3 @ 1-1/8" centers, 1/2" wide Table travel (longitudinal): 9-1/8" Table travel (cross): 4" Head travel: 9-1/2" Head tilt: 45° L/R Drilling capacity: 1/2" mild steel End milling capacity: 1/2" Face milling capacity: 1" Overall size: 20" W x 20" D x 30" H Approximate shipping weight: 135 lbs. FEATURES: 1/2" drilling capacity in steel and cast iron Adaptable R8 spindle Two variable-speed spindle ranges on a geared drive Fine feed head control Zero-setting dials on handwheels w/0.001" graduations Adjustable dovetail ways on column Adjustable depth stop Clear chip guard on spindle Rubber chip guards on ways INCLUDES: 1/32"–1/2" JT33 drill chuck R-8 x JT33 arbor Two 3/8"-16 T-slot nuts 3, 4, 5, 6mm hex wrenches 8 x 10, 14 x 17, 17 x 19, 36mm open-end wrenches 45–52mm spanner wrench Oil bottle

USD 1049.00

5% off

4 uses

medium

worked 5 months ago

Save 5% off with discount code

20% off

2 uses

medium

worked 4 months ago

Score 20% off with coupon

5% off

7 uses

medium

worked 3 months ago

Score 5% off with coupon code on $50+ orders

20% off

7 uses

medium

worked 3 months ago

Save 20% off with coupon code on $100+ orders

Sustainability Score

52%

While Grizzly has made some efforts to reduce packaging waste and implement energy-efficient practices in their warehouses, their overall sustainability commitment remains limited. They lack transparency in their supply chain practices and have not published comprehensive ESG reports. Their sourcing practices and labor conditions in manufacturing facilities are not well documented. The company has basic environmental policies but lacks concrete targets for emissions reduction or renewable energy adoption.

About Grizzly Industrial

4.0 (1)

FAQs

: Grizzly typically offers their largest discounts during Black Friday/Cyber Monday, Memorial Day, and their annual Summer Sale in July. They also run periodic flash sales throughout the year.
: Yes, Grizzly offers a 5% discount to active military personnel and veterans with valid ID. They also provide educational discounts for schools and institutions.
: The best time to purchase large machinery is during their end-of-year clearance (December) or during their Summer Sale in July, when they typically offer significant discounts on floor models and overstock items.
: Yes, Grizzly offers price matching on identical items from authorized dealers within 30 days of purchase.
: In the past month, Grizzly Industrial has launched 0 new promo coupons for shopper discounts. This indicates that Grizzly Industrial does not provide regular opportunities for customers to save money on their purchases.
: On average, Grizzly Industrial provides some discount coupons each month. Based on historical data, the average time between Grizzly Industrial coupon releases every Infinity days. However, this rate depends on various factors such as seasonal promotions (Black Friday, Cyber Monday, etc.), product launches, or other marketing initiatives. To stay informed about upcoming discounts and promotions, we recommend checking Grizzly Industrial website regularly, subscribing to email newsletters, and following them on social media.
: Grizzly Industrial is offering no working store-wide codes, however they are also offering 48 additional discount codes with a best discount of 5% off
: terra.coupons is the #1 provider of discount codes for your favorite retailers, such as Grizzly Industrial. As a crowd-sourced platform for coupon codes, we accurate codes for over 10,000 stores. Save time and avoid expired codes by checking terra.coupons for the latest Grizzly Industrial discount codes.

Curated by

Linda S.

Content Writer

Last updated September 2025

This page was curated by Linda, a savings and discount enthusiast from sunny Sarasota, Florida. With a keen eye for unbeatable deals, Linda ensures that all codes are checked and curated daily. She's also a certified yoga instructor who loves to share wellness tips. Check back tomorrow for more savings and perhaps a little zen!

Latest Grizzly Industrial coupon activity

Track real-time Grizzly Industrial coupon activity from our community. See which codes are working right now at Grizzly Industrial, when they were last verified, and any usage restrictions. Our feed helps you quickly find active codes and avoid expired ones.

From the blog

2025-04-29

Grizzly Industrial Promo Codes and Coupons September 2025