PA12-CF Filament

USD 99.00

Description

QIDI PA12-CF 3D Printer Filament It greatly improves the mechanical properties and heat resistance of the material, and releases the internal stress during the printing process through the fiber mesh structure, resulting in good dimensional stability of the printed part and no warpage. Temperature and Humidity Resistance QIDI TECH PA12-CF filaments have strong tensile and flexural strength in both wet and dry conditions. Display of PA12-CF Prints QIDI PA12-CF has a low coefficient of friction, self-lubricating properties and excellent wear resistance, which can easily meet all kinds of high-strength gears or industrial applications with high wear requirements. Accessory Compatibility Recommended Not Recommended Build Plate QIDI PEI Plate, HF Plate and Smooth Plate PC Plate Hotend Hardened Steel Nozzle ( 0.4 / 0.6 / 0.8 mm)Bimetal Nozzle ( 0.4 / 0.6 / 0.8 mm) Brass/Copper plated Nozzle (0.2/0.4/0.6/0.8 mm) Glue PVP glue/ 3D LAC adhesive spray / Recommended Printing Settings Drying Settings (Blast Drying Oven) 80-100 °C，4-6 h Printing and Keeping Container's Humidity < 15% RH (Sealed, with Desiccant) Nozzle Temperature 280 - 300 °C Bed Temperature (with Glue) 40-70 °C Printing Speed < 30-120 mm/s Physical Properties Density 1.09 g/cm³ Water absorption 2.46 % Heat Deflection Temperature 78.4 °C Melting Temperature 167 °C Melt Index 5.1 g/10 min Mechanical Properties Tensile Strength 76.95±1.17 MPa Breaking Elongation Rate 1.63±0.10 % Bending Modulus 3915.93±195.30 MPa Bending Strength 114.12±1.93 MPa Impact Strength 10.01±0.83 KJ/m2 Downloads Filament TDS Filament MSDS Printing Tips • PA12-CF material is very sensitive to moisture. Printing after absorbing moisture will result in oozing, extruding with bubbles and rough surface appearance, thus reducing print quality. It is recommended that put the filament into a dry box (humidity below 15%) immediately after opening the QIDI PAHT-CF vacuum foil bag for printing. Please put the unused filament back into the original aluminum foil bag for sealed storage. • After the printing, the printed part can be annealed to further improve the strength of QIDI PAHT-CF print part. Annealing conditions: place the printed part at 80-100°C for 4-6 hours and cool to room temperature naturally.For more details please refer to: Filament Guide on WIKI. Vacuum Aluminum Foil Packaging According to the test, the water vapor transmission rate of ordinary sealed packaging is 4.76%, while the water vapor transmission rate of vacuum aluminum foil packaging we use is only 0.014%. It can be seen that vacuum aluminum foil packaging is more water-resistant. Product Size QIDI TECH PA12-CF filament 1.75mmWorks perfectly with most FDM 3Dprinters on the market.